Priročniki+

Zgrmbo MX6035

Zgrmbo Digital Atomic Alarm Clock

Model: MX6035

1. Uvod

Thank you for choosing the Zgrmbo MX6035 Digital Atomic Alarm Clock. This clock is designed to provide accurate timekeeping, indoor temperature, and humidity readings, along with a reliable alarm function. Its atomic synchronization feature ensures precise time without manual adjustments, and the battery-operated design offers portability and convenience.

Zgrmbo MX6035 Digital Atomic Alarm Clock showing time, date, temperature, and humidity.

Figure 1: Zgrmbo MX6035 Digital Atomic Alarm Clock

2. Vsebina paketa

  • 1 x Zgrmbo MX6035 Digital Atomic Alarm Clock
  • 1 x uporabniški priročnik

Note: 3 x AAA batteries are NOT included and must be purchased separately.

3. Značilnosti izdelka

  • Accurate Atomic Time: Automatically synchronizes with the WWVB radio broadcast from NIST in Fort Collins, Colorado, ensuring precise timekeeping.
    • Diagram showing the atomic alarm clock receiving WWVB signal across different US time zones.

    Figure 2: Atomic Time Synchronization

  • Auto-Dimming Smart Night Light: Features a built-in ambient light sensor that automatically illuminates the display in dark environments. The display can also be manually lit by pressing the top of the clock.
    • Zgrmbo MX6035 clock on a bedside table with a person sleeping, demonstrating the automatic night light feature.

    Figure 3: Automatic Night Light in use

  • Alarm z dremežem: A classic alarm function with a gradually increasing beep sound for 120 seconds. The top snooze button provides an extra 5-minute nap.
    • Zgrmbo MX6035 clock with a 5-minute snooze icon.

    Figure 4: Alarm with 5-Minute Snooze

  • Več zaslonov: Shows time, date, indoor temperature (℉/℃), and indoor humidity.
    • Close-up of the Zgrmbo MX6035 clock display with labels for Time, 12/24H Switching, Time Zone, Alarm Time, Date, Indoor Temperature, and Indoor Humidity.

    Figure 5: Multi-Display Features

  • Battery Operated & Portable: Cordless design powered by 3 AAA batteries (not included), making it ideal for bedrooms, desks, or travel.
    • Zgrmbo MX6035 clock on a desk, highlighting its battery-operated nature with icons for 'No Cord', 'No Adapter', and '3 * AAA (Not Included)'.

    Figure 6: Battery Operated Design

4. Navodila za namestitev

Follow these steps for initial setup of your Zgrmbo MX6035 Atomic Alarm Clock:

  1. Namestite baterije: Open the battery compartment on the back of the clock and insert 3 new AAA batteries, ensuring correct polarity.
  2. Automatic WWVB Signal Search: Upon battery installation, the clock will automatically begin searching for the WWVB atomic signal. This process may take 7-14 minutes. Place the clock near a window, ideally facing Colorado, for optimal reception. A signal icon will appear on the display when reception is successful.
  3. Izberite časovni pas: Once the signal is received and the time is set, press the NASTAVI button to cycle through and select your correct time zone (PST, MST, CST, EST).
Three-step visual guide for setting up the Zgrmbo MX6035 clock: Install batteries, signal retrieve, and press SET for time zone.

Figure 7: Simple 3-Step Setup

Video vodnik za nastavitev

Video 1: Unboxing and Initial Setup of the MX6035 Alarm Clock. This video demonstrates how to unbox the clock, install batteries, and observe the initial synchronization process.

5. Navodila za uporabo

5.1. Prikaz časa in datuma

  • The main display shows the current time.
  • The date (month and day) is displayed below the alarm time.
  • Indoor temperature (℉/℃) and humidity (%) are shown at the bottom right.

5.2. 12/24 Hour Format Switching

To switch between 12-hour (AM/PM) and 24-hour formats, press the UP gumb.

Two Zgrmbo MX6035 clocks side-by-side, one showing 12-hour format (3:00 PM) and the other showing 24-hour format (15:00).

Figure 8: 12/24 Hour Format Switching

5.3. Nastavitev alarma

  1. Pritisnite AL.NASTAV button once to enter alarm setting mode. The alarm hour will flash.
  2. Uporabite UP or DOL gumbe za nastavitev ure budilke.
  3. Pritisnite AL.NASTAV again to confirm the hour and move to alarm minute setting. The alarm minute will flash.
  4. Uporabite UP or DOL gumbe za nastavitev minute alarma.
  5. Pritisnite AL.NASTAV a third time to confirm and exit alarm setting mode. The alarm icon will appear on the display, indicating the alarm is active.

5.4. Funkcija dremeža

When the alarm sounds, press the top of the clock (the VKLOP/IZKLOP button area) to activate the snooze function. The alarm will pause for 5 minutes and then sound again. You can repeat this process.

5.5. Disabling the Alarm

Če želite alarm popolnoma izklopiti, pritisnite AL.NASTAV button when the alarm is not sounding. The alarm icon on the display will disappear.

5.6. Manual Backlight Activation

In any lighting condition, press the top of the clock (the VKLOP/IZKLOP button area) to manually illuminate the display for a few seconds.

6. Vzdrževanje

  • Čiščenje: Uro obrišite z mehko, suho krpo. Ne uporabljajte abrazivnih čistil ali kemikalij.
  • Zamenjava baterije: When the display dims or functions become erratic, replace all three AAA batteries with new ones. Ensure correct polarity.
  • Shranjevanje: Če uro shranjujete dlje časa, odstranite baterije, da preprečite puščanje.

7. Odpravljanje težav

TežavaMožen vzrokrešitev
Clock does not set time automatically / Time is incorrect.Poor WWVB signal reception. Incorrect time zone selected.Place the clock near a window, away from electronic interference. Allow 7-14 minutes for signal reception. Ensure the correct time zone is selected using the NASTAVI button. If reception is consistently poor, you may need to manually set the time (see manual for advanced settings, if available, or try re-inserting batteries to force a new signal search).
Backlight is dim or not working.Low batteries. Ambient light sensor detecting too much light.Replace batteries with new ones. Ensure the clock is in a sufficiently dark environment for the auto-dimming feature to activate. Manually press the top of the clock to check if the backlight works.
Alarm se ne oglasi.Alarm is not activated. Alarm volume is too low (if adjustable).Ensure the alarm icon is visible on the display. If not, set the alarm as per section 5.3. This model has a fixed alarm volume.
Zaslon je prazen ali utripa.Prazne ali prazne baterije.Vse tri baterije AAA zamenjajte z novimi.
Daylight Saving Time (DST) adjustment issue.Clock not automatically adjusting for DST.The clock is designed to automatically adjust for DST based on the WWVB signal. Ensure good signal reception. If manual override is needed, consult the full product manual for specific button sequences (often involves the DOL gumb ali NASTAVI button in advanced modes).

8. Specifikacije

FunkcijaPodrobnost
ZnamkaZgrmbo
ModelMX6035
Vrsta zaslonaDigitalni LCD
Vir napajanja3 x AAA baterije (niso vključene)
Dimenzije izdelka5.5 cm Š x 3.25 cm V
MaterialAkrilonitril butadien stiren (ABS)
Temperaturno območje32℉ do 122℉ (0℃ do 50℃)
Razpon vlažnosti20% RH do 95% RH
Posebne lastnostiAtomic Time, Auto-Dimming Night Light, Alarm, Snooze, Date Display, Indoor Temp/Humidity

9. Garancija in podpora

For warranty information or technical support, please refer to the product packaging or contact the seller/manufacturer directly through your purchase platform. Keep your proof of purchase for any warranty claims.

Manufacturer: MEIZHOU MINGXING ELECTRONICS CO.,LTD