1. Uvod
The FNIRSI SWM-10 is a portable, intelligent color screen spot welding machine designed for various battery welding applications. This device integrates a 5000mAh high-rate power battery, offering efficient and reliable spot welding for materials up to 0.25mm thick. It is suitable for DIY projects, battery pack assembly, and other precision welding tasks. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting.
Figure 1.1: FNIRSI SWM-10 Portable Spot Welder in operation, showing the main unit and welding probes connected to a battery array.
2. Varnostna navodila
- Pri delu s točkovnim varilnim aparatom vedno nosite ustrezno osebno zaščitno opremo (OZO), vključno z zaščitnimi očali.
- Zagotovite, da je delovno območje dobro prezračeno in brez vnetljivih materialov.
- Naprave ne uporabljajte z mokrimi rokami ali damp pogojev.
- Keep the device away from children and unauthorized personnel.
- Avoid touching the welding probes during operation, as they can become hot and carry electrical current.
- Do not attempt to weld materials thicker than 0.25mm or materials not specified as weldable by the manufacturer.
- If the device shows signs of damage or malfunction, discontinue use immediately and contact support.
3. Izdelek je končanview
The FNIRSI SWM-10 is a versatile tool combining spot welding capabilities with a power bank function. It features a high-resolution color screen for displaying welding parameters and battery status.
3.1 Ključne lastnosti
- Prenosna zasnova: Kompakten in lahek za enostaven transport in uporabo.
- High-Rate Battery: Integrated 5000mAh power battery for sustained operation.
- Dvojna funkcionalnost: Functions as a spot welder and a 5V2.1A USB power bank.
- Dvojno pulzno varjenje: Advanced technology for firm, stable, and reliable welds, reducing oxidation and improving consistency.
- Weldable Materials: Capable of welding nickel plate, sheet iron, and steel sheet up to 0.25mm thickness.
- Inteligentni nadzor: Color screen display for precise parameter adjustment and monitoring.
Figure 3.1: The FNIRSI SWM-10 highlighting its multi-functionality and key specifications.
Figure 3.2: The FNIRSI SWM-10 functioning as a power bank, charging mobile devices.
3.2 Komponente
- Main Spot Welder Unit with Color Screen
- Welding Probes (Red and Black)
- Polnilni kabel USB (tip C)
- Nickel Strips (for testing/initial use)
Figure 3.3: Internal components of the FNIRSI SWM-10, showcasing the high-quality A-grade batteries.
4. Nastavitev
4.1 Začetno polnjenje
- Connect the provided USB Type-C cable to the charging port on the FNIRSI SWM-10.
- Connect the other end of the cable to a suitable USB power adapter (5V/2A recommended).
- Allow the device to charge fully before first use. The screen will indicate charging status.
4.2 Connecting Welding Probes
- Ensure the spot welder is turned off.
- Insert the red welding probe into the red terminal on the main unit.
- Insert the black welding probe into the black terminal on the main unit.
- Ensure connections are secure to prevent arcing or poor performance.
5. Navodila za uporabo
5.1 Vklop/izklop
Press and hold the power button (usually located on the side or front panel) for a few seconds to turn the device on or off. The color screen will illuminate upon power-on.
5.2 Prilagajanje varilnih parametrov
The FNIRSI SWM-10 features an intelligent control system with a color screen. Use the navigation buttons (up/down arrows, select button) to adjust parameters such as:
- Preb (Pre-pulse): Cleans the oxide layer on the weldment surface.
- Puls (Main Pulse): The primary welding pulse duration.
- Intv (Interval): Time between pre-pulse and main pulse (for double pulse mode).
- Pike: Number of welding pulses.
- Raven moči: Adjust the welding power based on material thickness and type. Start with lower settings and increase gradually.
Refer to the on-screen interface for specific parameter names and adjustment ranges. Experiment with scrap material to find optimal settings for your application.
Figure 5.1: The FNIRSI SWM-10 displaying double pulse welding technology settings, which enhance weld quality by cleaning the surface before the main weld.
5.3 Performing a Spot Weld
- Prepare the materials to be welded. Ensure surfaces are clean and free of rust or contaminants.
- Place the nickel strip (or other weldable material) onto the battery terminal or workpiece.
- Position both welding probes firmly and simultaneously onto the nickel strip, ensuring good contact with the underlying material.
- The device will automatically detect contact and initiate the welding process according to the set parameters.
- After the weld, lift the probes. Inspect the weld for strength and appearance. Adjust settings if necessary.
Figure 5.2: The FNIRSI SWM-10 in action, demonstrating efficient spot welding on a battery array. It supports welding of nickel plate, sheet iron, and steel sheet up to 0.25mm.
6. Vzdrževanje
- Čiščenje: Regularly clean the welding probes and the main unit with a dry, soft cloth. Do not use abrasive cleaners or solvents.
- Stanje sonde: Inspect the tips of the welding probes for wear or oxidation. If necessary, gently file or sand the tips to ensure good electrical contact.
- Shranjevanje: Store the device in a cool, dry place, away from direct sunlight and moisture. Ensure the battery is partially charged (around 50-70%) for long-term storage.
- Vzdrževanje baterije: Avoid fully discharging the battery frequently. Recharge the device when the battery level is low.
7. Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Poor or weak welds | Incorrect power setting, dirty probes, poor contact, material too thick | Increase power setting, clean probe tips, ensure firm contact, verify material thickness is within limits. |
| Naprava se ne vklopi | Low battery, faulty power button | Napravo popolnoma napolnite. Če težava ne izgine, se obrnite na podporo. |
| Opozorilo na pregrevanje | Continuous use, high ambient temperature | Allow the device to cool down. Operate in a well-ventilated area. |
| Screen not displaying correctly | Software glitch, internal issue | Znova zaženite napravo. Če težava ne izgine, se obrnite na podporo. |
8. Specifikacije
- Številka modela: YH-FNIRSI-SWM-10
- Znamka: FNIRSI
- vir energije: Napajanje na baterije
- Kapaciteta baterije: 5000 mAh (Integrated)
- Max Weldable Thickness: 0.25 mm (Nickel plate, sheet iron, steel sheet)
- USB izhod: 5V/2.1A (Power Bank Function)
- Mere izdelka (D x Š x V): 20 x 10 x 15 cm
- Teža artikla: 1 kilogramov
- barva: Črna
- Država izvora: Kitajska
9. Garancija in podpora
Za informacije o garanciji in tehnično podporo glejte dokumentacijo, ki je bila priložena nakupu, ali se obrnite neposredno na prodajalca/proizvajalca. Shranite dokazilo o nakupu za uveljavljanje garancije.
