Ansmann 1001-0143

ANSMANN BC 6-12V/2A Smart Charger Instruction Manual

1. Uvod

The ANSMANN BC 6-12V/2A Smart Charger is an intelligent, automatic 8-stage battery charger designed for safe and efficient charging of various 6V and 12V batteries. It is suitable for lead-acid, lead-gel, lead-fleece, and 12V LiFePO4 batteries with capacities ranging from 4 Ah to 60 Ah. This charger ensures optimal battery performance and extends battery life through its advanced charging process and comprehensive safety features.

Vključeno v škatli:

2. Nastavitev in povezava

Before connecting the charger, ensure the charger is unplugged from the mains power supply. Select the appropriate connection method for your battery: battery clamps for temporary connection or ring terminals for a more permanent installation.

Koraki povezave:

  1. Connect the red positive (+) charger cable to the positive (+) terminal of the battery.
  2. Connect the black negative (-) charger cable to the negative (-) terminal of the battery.
  3. Zagotovite, da so vse povezave varne.
  4. Plug the charger into a suitable mains power outlet. The charger will automatically begin its initial checks.
ANSMANN BC 6-12V/2A Smart Charger with battery clamps, ring terminals, and power cable

Figure 1: ANSMANN Smart Charger with included accessories for various connection types.

Person connecting the ANSMANN charger to a car battery

Slika 2: Nprample of connecting the charger to a car battery using battery clamps.

ANSMANN charger connected to a motorcycle battery

Slika 3: Nprample of connecting the charger to a motorcycle battery.

3. Navodila za uporabo

The charger features an 8-stage fully automatic intelligent charging process. Use the 'MODE' button to select the appropriate charging program and current for your battery.

Selecting Charging Programs:

Pritisnite NAČIN button to cycle through the available charging programs:

For each program, you can select a charging current of either 1A or 2A. The LCD display will indicate the selected mode and charging status.

8-Stage Automatic Charging Process:

The charger automatically progresses through the following stages to optimize battery charging and maintenance:

  1. Preverjanje baterije: Assesses the battery's initial status and voltage.
  2. Razžveplanje: Applies pulsed current and voltage to break down sulfate crystals on lead plates, restoring battery capacity.
  3. Analiza: Temporarily halts charging to measure the battery's no-load voltage.
  4. Reactivation Charge: Prepares the battery for the main charge, resuming desulfation if necessary.
  5. Main Charge: Charges the battery with a constant current until it reaches a high state of charge.
  6. Charge Optimization: Gradually reduces the charging current to achieve maximum battery capacity.
  7. voltage Nadzor: Monitors the battery's charge status to ensure optimal voltage ravni.
  8. Holding Charge (Maintenance): Provides pulse maintenance charging as needed to prevent self-discharge and keep the battery fully charged.
Diagram, ki prikazuje devetketage charging process of the ANSMANN charger

Slika 4: Vizualna predstavitev 8-ihtagsamodejni postopek polnjenja.

4. Vzdrževanje

The ANSMANN BC 6-12V/2A Smart Charger is designed for durability and minimal maintenance. It is rated IP65, meaning it is protected against dust ingress and low-pressure water jets from any direction. This allows for safe use in various environments.

The charger can remain connected to the battery for extended periods, providing a continuous holding charge to prevent self-discharge. This feature is ideal for vehicles stored for long durations, ensuring the battery remains fully charged and ready for use.

Periodically inspect the charger cables and connectors for any signs of damage or wear. Keep the charger clean and free from excessive dust or debris.

5. Troubleshooting and Safety Features

The ANSMANN Smart Charger incorporates multiple safety features to protect both the user and the battery during operation. If an issue occurs, the charger's LCD display may indicate an error or the charging process may not initiate.

Varnostne funkcije:

ANSMANN charger in a wet environment, illustrating protection features

Figure 5: The charger's robust design and protection features, including splash water resistance.

ANSMANN charger connected to various battery types, highlighting defect detection

Figure 6: The charger's universal compatibility and defect detection capability.

Pogoste težave in rešitve:

6. Specifikacije

FunkcijaSpecifikacija
Številka modela1001-0143
Vhodna voltageAC 100-240V, 50/60Hz
Izhodna voltage6V / 12V (enosmerni tok)
Polnilni tok1A / 2A (selectable)
Kapaciteta baterije4 Ah - 60 Ah
Vrste baterijLead-Acid, Lead-Gel, Lead-Fleece, 12V LiFePO4
Polnjenje Stages8-Stage Samodejno
Ocena zaščiteIP65 (zaščita pred prahom in brizganjem vode)
Dimenzije izdelka7.09 x 3.11 x 1.93 palca (180 x 79 x 49 mm)
Teža predmeta1.03 funtov (0.47 kg)

7. Garancija

The ANSMANN BC 6-12V/2A Smart Charger comes with a 3-letna garancija proizvajalca from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, unauthorized modifications, accidents, or normal wear and tear.

8. Podpora

For further assistance, technical support, or warranty inquiries, please contact ANSMANN customer service. You can find contact information on the official ANSMANN webspletnem mestu ali prek vašega prodajalca.

For more information about ANSMANN products, visit the Ansmann Store on Amazon.

Povezani dokumenti - 1001-0143

Prejview ANSMANN BC 6-12V / 6A Inteligentní nabíječka avtobaterií Návod k obsluze
Návod k obsluze za inteligentní nabíječku avtobaterií ANSMANN BC 6-12V / 6A. Pokrývá nabíjecí programy, připojení, varnostni pokyny, řešení problémů in technické specifikace za 6V in 12V olovéné, AGM, gelové in 12V LiFePO4 baterijo.
Prejview Bedienungsanleitung: ANSMANN BC 6-12V / 10A Intelligentes Autobatterieladegerät
Umfassende Bedienungsanleitung für das ANSMANN BC 6-12V / 10A intelligente Autobatterieladegerät. Erfahren Sie mehr über die Funktionen, Sicherheitshinweise und Ladeprogramme für 6V und 12V Batterien.
Prejview Uporabniški priročnik za polnilnik Ansmann HC120PD
Uporabniški priročnik za Ansmann Home Charger HC120PD, polnilnik USB-C PD, zasnovan za delovanje naprav s standardnim vmesnikom USB. Vsebuje varnostna navodila, smernice za uporabo, tehnične specifikacije in informacije o odstranjevanju.
Prejview Uporabniški priročnik za Bluetooth zvočnik ANSMANN BTS-MINI
Uporabniški priročnik za prenosni Bluetooth zvočnik ANSMANN BTS-MINI, ki podrobno opisuje nastavitev, funkcije, varnostne smernice, vodoodpornost IPX7 in informacije o odstranjevanju.
Prejview ANSMANN POWERBANK 5.4 Tip C Priročnik
Uporabniški priročnik za ANSMANN POWERBANK 5.4 Type C, ki vsebuje navodila za uporabo, polnjenje, tehnične specifikacije, varnostne smernice in okoljske informacije.
Prejview ANSMANN SMART ECO SET Ladegerät Bedienungsanleitung
Umfassende Bedienungsanleitung für das ANSMANN SMART ECO SET Ladegerät. Enthält Informationen zur Verwendung, Sicherheit, technischen Daten und Umweltaspekten für AA/AAA NiCd/NiMH Akkus.