Uporabniški priročnik za brezžično mehansko igralno tipkovnico FREEWOLF RK-K8

1. Nastavitev

1.1 Vsebina paketa

Preden začnete, se prepričajte, da so v paketu vsi elementi:

• FREEWOLF RK-K8 Wireless Mechanical Gaming Keyboard
• USB sprejemnik (2.4 GHz)
• Type-C to USB-A Braided Coiled Cable
• Izvleček za ključe
• Stikalo Stikalo
• Rezervna stikala (2 kosi)
• Uporabniški priročnik

Image 1.1: The FREEWOLF RK-K8 keyboard shown with its included accessories: a coiled USB-C cable, a USB receiver, a keycap puller, a switch puller, and two spare switches.

1.2 Začetno polnjenje

The RK-K8 keyboard features a built-in 4000mAh rechargeable battery. For optimal performance, it is recommended to fully charge the keyboard before its first use.

1. Connect the provided Type-C end of the coiled cable to the keyboard's USB-C port.
2. Connect the USB-A end of the coiled cable to a powered USB port on your computer or a USB wall adapter.
3. The keyboard's indicator light will show charging status. Once fully charged, the light will change or turn off, depending on the model.

Image 1.2: An illustration highlighting the 4000mAh battery capacity, indicating long-lasting usage for the keyboard.

1.3 Načini povezave

The RK-K8 supports three connection modes: Wired (USB-C), 2.4GHz Wireless, and Bluetooth 5.0. You can switch between these modes using the toggle switch located on the keyboard.

Image 1.3: A close-up of the keyboard showing the toggle switch for selecting between 2.4G wireless, USB wired, and Bluetooth connection modes.

1.3.1 Wired Mode (USB-C)

• Toggle the switch on the keyboard to the "USB" position.
• Connect the Type-C end of the coiled cable to the keyboard and the USB-A end to your computer.
• Vaš operacijski sistem bo tipkovnico samodejno prepoznal.

1.3.2 2.4GHz Wireless Mode

• Locate the USB receiver, typically stored in a dedicated slot on the keyboard.
• Toggle the switch on the keyboard to the "2.4G" position.
• USB-sprejemnik priključite v razpoložljiva vrata USB na vašem računalniku.
• Tipkovnica bi se morala povezati samodejno.

Slika 1.4: A view of the keyboard's underside or side, indicating the storage slot for the 2.4GHz USB receiver.

1.3.3 Bluetooth 5.0 Mode

The RK-K8 can connect to up to three Bluetooth devices simultaneously.

1. Toggle the switch on the keyboard to the "BT" position.
2. To enter pairing mode for a specific Bluetooth channel (BT1, BT2, BT3), press and hold FN + Q, FN + W, oz FN + E for 3-5 seconds until the corresponding key (Q, W, or E) flashes rapidly.
3. On your device (computer, tablet, smartphone), open Bluetooth settings and search for "RK-K8" or a similar device name.
4. Select the keyboard to pair. The key will stop flashing once successfully paired.
5. Za preklapljanje med seznanjenimi napravami Bluetooth preprosto pritisnite FN + Q, FN + W, oz FN + E enkrat.

2. Navodila za uporabo

2.1 Key Functions and Layout

The RK-K8 features a 100-key layout, retaining essential keys while maintaining a compact form factor. Many keys have secondary functions accessible via the FN ključ.

Image 2.1: A diagram illustrating the 100-key layout of the RK-K8 keyboard, highlighting its compact design while including a numeric keypad.

2.1.1 Večpredstavnostne tipke in bližnjice

Uporabite FN key in combination with the F-row keys for multimedia control and other shortcuts:

• FN + F7: Prejšnja skladba
• FN + F8: Predvajaj/Premor
• FN + F9: Naslednja skladba
• FN + F10: Nemo
• FN + F11: Znižaj glasnost
• FN + F12: Povečaj glasnost
• Other FN combinations may be detailed in the included user manual for specific functions.

2.2 Nadzor osvetlitve ozadja

The RK-K8 features customizable rainbow backlighting with 18 different effects.

Image 2.2: The RK-K8 keyboard displaying various rainbow backlight effects, showcasing the customizable lighting options.

• FN + |: Switch between 18 backlight effects.
• FN + ↑ / ↓: Adjust backlight brightness.
• FN + ← / →: Adjust the speed of dynamic backlight effects.
• FN + X: Turn backlight On/Off.

2.3 Združljivost sistema

The keyboard supports both Windows and Mac operating systems. Specific key functions may adapt based on the selected system mode.

• To switch between Windows and Mac modes, refer to the specific FN key combination in your physical user manual or on the manufacturer's webmesto.

3. Vzdrževanje

3.1 Čiščenje

Redno čiščenje pomaga ohranjati videz in funkcionalnost tipkovnice.

1. Izključite tipkovnico iz vseh virov napajanja.
2. Use the provided keycap puller to gently remove keycaps for thorough cleaning.
3. Tipke in površino tipkovnice obrišite z mehko, rahlo suho krpoamp krpo. Izogibajte se prekomerni vlagi.
4. Za odstranjevanje prahu in umazanije med stikali uporabite stisnjen zrak.
5. Ensure all parts are completely dry before reassembling keycaps and reconnecting the keyboard.

3.2 Switch and Keycap Replacement (Hot-Swappable Feature)

The RK-K8 features a hot-swappable PCB, allowing you to change mechanical switches without soldering. This supports most 3-pin mechanical switches.

Slika 3.1: Bližnji posnetek view of the keyboard with a keycap and switch removed, revealing the hot-swappable socket for easy switch replacement.

1. Using the keycap puller, gently remove the desired keycap.
2. Using the switch puller, carefully grip the switch from its top and bottom clips and pull it straight up to remove it from the PCB.
3. Align the pins of the new 3-pin mechanical switch with the holes on the PCB. Ensure the pins are straight.
4. Gently press the new switch into place until it clicks securely. Do not force it to avoid bending pins.
5. Ponovno namestite pokrovček tipke.

The keyboard's gasket-mounted structure, combined with sound-dampening materials, contributes to a comfortable typing experience and reduced hollow sounds.

Image 3.2: An exploded diagram illustrating the internal gasket mount structure of the keyboard, showing layers of soundproofing cotton and the PCB for enhanced typing feel.

4. Odpravljanje težav

If you encounter issues with your RK-K8 keyboard, please refer to the following common solutions:

• Keyboard not responding in Wireless/Bluetooth mode:
  • Prepričajte se, da je tipkovnica napolnjena.
  • Verify the connection mode switch is in the correct position (2.4G or BT).
  • For 2.4G, ensure the USB receiver is securely plugged into a working USB port.
  • For Bluetooth, ensure the keyboard is paired to the correct channel (FN+Q/W/E) and your device's Bluetooth is enabled. Try re-pairing if necessary.
  • Test in wired mode to confirm basic functionality.
• Keys not registering or repeating:
  • Check if any debris is under the keycap or switch.
  • If using hot-swappable switches, ensure the switch is fully seated and its pins are not bent. Try replacing the switch with a spare one.
  • Ensure the keyboard firmware is up to date (check manufacturer's webspletnem mestu).
• Osvetlitev ozadja ne deluje ali je nepravilna:
  • Ensure the backlight is not turned off (FN+X).
  • Adjust brightness (FN+↑/↓).
  • Cycle through different effects (FN+|) to see if other effects work.
  • Prepričajte se, da je tipkovnica dovolj napolnjena.
• Connectivity issues with KVM switches:
  • Some KVM switches may have compatibility issues with wireless peripherals. Try connecting the keyboard directly to the computer or using wired mode with the KVM.

5. Specifikacije

6. Garancija in podpora

For warranty information, technical support, or further assistance, please refer to the contact details provided in your product packaging or visit the official FREEWOLF webmesto. Shranite račun za garancijske zahtevke.