Uvod
This manual provides essential instructions for the safe and efficient use of your Genesis 80GMSI Mega Steam Iron. Please read all instructions carefully before operating the appliance and retain this manual for future reference. Proper use and maintenance will ensure optimal performance and extend the lifespan of your iron.
Pomembna varnostna navodila
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury. Please observe the following:
- Read all instructions thoroughly before using the iron.
- Likalnika ne puščajte brez nadzora, ko je vklopljen ali priključen na električno omrežje.
- Likalnik in njegov kabel hranite izven dosega otrok in oseb z zmanjšanimi telesnimi, senzoričnimi ali duševnimi sposobnostmi.
- Za zaščito pred nevarnostjo električnega udara ne potapljajte likalnika v vodo ali druge tekočine.
- Always place the iron on a stable, heat-resistant surface when not in use or when filling the water tank.
- Unplug the iron from the electrical outlet before filling with water, emptying, or when not in use.
- Ne dotikajte se vroče likalne plošče. Uporabljajte samo ročaj.
- Inspect the power cord for any damage before each use. Do not operate the iron if the cord is damaged.
- Likalnik uporabljajte samo za predvideni namen, kot je opisano v tem priročniku.
Konec izdelkaview
Familiarize yourself with the components of your Genesis 80GMSI Mega Steam Iron:

Slika: Pod kotom view of the Genesis 80GMSI Mega Steam Iron, showcasing its ergonomic design and controls.
- Rezervoar za vodo: Prozoren rezervoar za vodo.
- Razpršilna šoba: Oddaja fino vodno meglico.
- Gumb za upravljanje pare: Prilagodi izpust pare ali izbere suho likanje.
- Regulator temperature: Sets the soleplate temperature according to fabric type.
- Gumb za samočiščenje: Aktivira funkcijo samočiščenja.
- Gumb za sunek pare: Delivers an extra powerful shot of steam.
- Keramična likalna plošča: Smooth, scratch-resistant surface for efficient gliding.
- Napajalni kabel: Priključi likalnik na električno vtičnico.

Image: The underside of the iron, highlighting the ceramic soleplate with evenly distributed steam holes. Icons for Anti-Drip, Anti-Scale, Self Clean, and Super Burst are visible.
Nastavitev
- Razpakirajte likalnik: Likalnik in vse dodatke previdno vzemite iz embalaže. Embalažo shranite za shranjevanje ali vračilo, če je potrebno.
- Odstranite zaščitno folijo: Ensure all protective films or stickers are removed from the soleplate and body of the iron.
- Napolni rezervoar za vodo: Ensure the iron is unplugged. Open the water tank inlet cover and fill the tank with clean tap water up to the 'MAX' level indicator. For optimal performance and to prevent mineral buildup, distilled or demineralized water is recommended, especially in hard water areas. Close the inlet cover securely.
- Začetno ogrevanje: Place the iron upright on a stable, heat-resistant surface. Plug the power cord into a suitable electrical outlet. The indicator light will illuminate, signaling that the iron is heating.
Navodila za uporabo
Your Genesis 80GMSI Mega Steam Iron offers versatile ironing options:

Image: A collage illustrating key features: a close-up of the ceramic soleplate, a powerful steam burst from the iron, and a person ironing, demonstrating its safe use on various fabrics.
- Izbira temperature: Turn the Temperature Control Dial to the setting appropriate for your fabric type (e.g., silk, wool, cotton, linen). Refer to garment care labels. The indicator light will turn off when the selected temperature is reached.
- Suho likanje: For dry ironing, ensure the water tank is empty or the Steam Control Dial is set to the '0' (no steam) position. Allow the iron to heat to the desired temperature.
- Parno likanje: For steam ironing, ensure the water tank is filled. Set the Temperature Control Dial to a steam-appropriate setting (usually cotton, linen, or max). Once the iron reaches temperature, adjust the Steam Control Dial to your desired steam level.
- Funkcija izbruha pare: For stubborn creases, press the Steam Burst Button. This delivers a powerful shot of steam (up to 100g/min). Wait a few seconds between bursts to allow the steam to regenerate.
- Funkcija pršenja: Press the Spray Button to emit a fine mist of water, which can help damptkanine za lažje likanje.
- Navpično kuhanje na pari: The steam burst function can be used for vertical steaming of hanging garments or drapes. Hold the iron vertically a few inches from the fabric and press the Steam Burst Button.

Image: A person demonstrating the use of the Genesis 80GMSI Mega Steam Iron to smooth out wrinkles on clothing.
Vzdrževanje in nega
Regular maintenance ensures the longevity and performance of your iron:
- Samočistilna funkcija: Your iron features a self-cleaning function for enhanced durability. To use:
- Napolnite rezervoar za vodo do oznake 'MAX'.
- Set the Steam Control Dial to '0' (dry) and the Temperature Control Dial to 'MAX'.
- Plug in the iron and wait for the indicator light to turn off, signaling it has reached maximum temperature.
- Izključite likalnik iz električnega omrežja. Držite ga vodoravno nad umivalnikom.
- Press and hold the Self-Clean Button. Hot water and steam will be expelled from the soleplate, flushing out mineral deposits. Gently rock the iron back and forth.
- Spustite gumb, ko je rezervoar za vodo prazen.
- Pred shranjevanjem pustite, da se likalnik popolnoma ohladi.
- Čiščenje likalne plošče: When the iron is cool, wipe the ceramic soleplate with a damp cloth. For stubborn stains, a mild, non-abrasive cleaner specifically designed for iron soleplates can be used. Never use abrasive scouring pads or metallic cleaners.
- Čiščenje zunanjosti: Zunanjost likalnika obrišite z mehko krpoamp krpo. Ne uporabljajte močnih kemikalij ali abrazivnih čistil.
- Shranjevanje: After each use, ensure the water tank is empty. Allow the iron to cool completely. Wrap the power cord neatly around the cord wrap area (if available) or secure it with a tie. Store the iron upright in a safe, dry place.
Odpravljanje težav
Če imate težave z likalnikom, si oglejte naslednje pogoste težave in rešitve:
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Likalnik se ne segreje | Ni priključeno; napaka v vtičnici; temperaturni regulator nastavljen na minimum. | Preverite priključek za napajanje; preizkusite vtičnico z drugo napravo; obrnite gumb za nastavitev temperature na višjo nastavitev. |
| Ni pare ali premalo pare | Water tank empty; temperature too low for steam; steam control set to '0'. | Fill water tank; set temperature to a steam-appropriate level (e.g., cotton/linen); adjust steam control dial. |
| Voda pušča iz likalne plošče | Water tank overfilled; iron not hot enough for steam; self-clean valve partially open. | Do not overfill; allow iron to reach full temperature before using steam; perform self-clean cycle. |
| Soleplate sticking to fabric | Temperatura je previsoka za tkanino; likalna plošča je umazana. | Adjust temperature according to fabric type; clean the soleplate when cool. |
Specifikacije
- Znamka: Genesis
- Številka modela: 80GMSI
- Moč/vattage: 2600 vatov
- Vrsta likalne plošče: Keramika
- Posebne lastnosti: Anti-Drip, Self-Cleaning, Steam Burst (up to 100g/min)
- Teža artikla: Približno 1 kg
- Dimenzije izdelka: 31.5L x 16.5W centimetrov
Garancija in podpora
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or service inquiries, please contact Genesis customer service through their official channels.





