1. Uvod
This manual provides essential information for the installation, operation, and maintenance of your HALLOMOTOR M620 G510 Mid Drive Motor Conversion Kit. This kit is designed to convert a standard bicycle into an electric bicycle, offering enhanced power and performance. Please read this manual thoroughly before installation and use to ensure safe and optimal operation of your e-bike system.
Slika 1: Primerample of a bicycle converted with the HALLOMOTOR M620 G510 Mid Drive Motor Kit.
2. Varnostne informacije
Always prioritize safety when working with or operating your e-bike conversion kit. Failure to follow safety instructions can result in serious injury or damage to the product.
- Preberite vsa navodila: Familiarize yourself with all components and procedures before beginning installation or operation.
- Priporočena profesionalna namestitev: If you are unsure about any step, seek assistance from a qualified bicycle mechanic.
- Nosite zaščitno opremo: Med vožnjo z električnim kolesom vedno nosite čelado in ustrezno varnostno opremo.
- Preverite povezave: Ensure all electrical connections are secure and waterproof before riding, especially after rain or washing.
- Varnost baterije: Use only compatible batteries. Do not short-circuit, puncture, or expose the battery to extreme temperatures.
- Redni pregledi: Periodically check all bolts, cables, and components for tightness and wear.
- Izpostavljenost vodi: While the motor has an IP65 waterproof rating, avoid submerging the motor or exposing electrical connections to high-pressure water jets.
- Lokalni predpisi: Be aware of and comply with all local laws and regulations regarding e-bike use.
3. Vsebina paketa
Carefully unpack the box and verify that all items listed below are present and undamaged. If any items are missing or damaged, contact your vendor immediately.
Image 2: All components included in the conversion kit.
- 1 x 48V/52V 1000W Mid Drive Motor (UART Protocol)
- 1 Pair x Brake Levers
- 1 Pair x Crank Arms
- 1 x 44T Chainwheel
- 1 komplet x palčna ročica za plin
- 1 komplet senzorjev hitrosti
- 1 x DPC18 Display
- 1 x 4-v-1 kabel
- 1 Set x Accessories (mounting hardware, lock nuts, etc.)
4. Nastavitev in namestitev
The installation of the M620 G510 mid-drive motor requires careful attention to detail. It is crucial that the bicycle frame's bottom bracket area is compatible and prepared correctly for the motor's dimensions.
- Prepare the Bicycle Frame: Ensure the frame adapter and bicycle frame are properly aligned. For optimal fit and concentricity, the frame's bottom bracket area may require heat treatment after welding to match the motor's installation dimensions and mounting hole locations.
- Namestitev motorja: Align the three mounting holes on the motor with the corresponding holes on the bicycle frame's bottom bracket. Carefully fit the motor into position.
- Zavarujte motor: Use the provided accessories and mounting hardware to firmly secure the motor to the frame. Ensure all bolts are tightened to the manufacturer's specifications.
- Install Crank Arms and Chainwheel: Attach the crank arms and the 44T chainwheel to the motor's shaft.
- Install Brake Levers and Thumb Throttle: Mount the brake levers and thumb throttle onto the handlebars.
- Install DPC18 Display: Secure the DPC18 display to the handlebars in a position that is easily visible and accessible.
- Povežite ožičenje: Use the 4-in-1 cable to connect the display, throttle, brake levers, and speed sensor to the motor. Ensure all connections are snug and correctly oriented (refer to wiring diagram if available).
- Namestitev senzorja hitrosti: Mount the speed sensor on the chainstay and align the magnet on a spoke of the rear wheel.
- Povežite baterijo: Connect your compatible 48V or 52V battery to the motor system. Ensure the battery is securely mounted on the bicycle.
- Začetno preverjanje: Before riding, perform a thorough check of all installed components, connections, and ensure the brakes and gears function correctly.
Image 3: Mid-drive motor installed on a bicycle.
5. Navodila za uporabo
The DPC18 display serves as the Human Machine Interface (HMI) for your HALLOMOTOR M620 G510 system, providing essential information and control over the motor's functions.
Image 4: DPC18 Display and motor connections.
5.1 DPC18 Display Overview
The DPC18 display features a high-contrast LCD screen designed for clear readability, even in direct sunlight. Its compact design offers protection against water and dust (IP65 rated).
- Vklop/izklop: Pritisnite in držite gumb za vklop na zaslonu, da vklopite ali izklopite sistem.
- Izbira ravni pomoči: Use the up/down buttons to cycle through different levels of pedal assist (e.g., 0-5 or 0-9, depending on configuration).
- Prikaz informacij: The screen shows real-time data such as current speed, battery level, assist level, trip distance, odometer, and more.
- Pomoč pri hoji: Some displays offer a walk assist function, typically activated by holding the down button, which provides low-speed motor assistance for pushing the bike.
- Meni z nastavitvami: Access the settings menu (refer to the DPC18 specific manual for detailed navigation) to customize parameters like wheel size, speed limit, and unit preferences.
5.2 Uporaba gumba za palec
The thumb throttle provides on-demand power without pedaling. Apply gentle pressure to the throttle to engage the motor. Always use the throttle responsibly and be aware of your surroundings.
5.3 Brake Levers with Cut-off Sensor
The included brake levers are equipped with motor cut-off sensors. Engaging either brake lever will immediately cut power to the motor, enhancing safety during braking.
6. Vzdrževanje
Regular maintenance ensures the longevity and reliable performance of your HALLOMOTOR M620 G510 conversion kit.
- Čistoča: Motor, zaslon in električne priključke vzdržujte čiste. Uporabite oglasamp cloth to wipe surfaces. Avoid high-pressure washing directly on electrical components.
- Pregled kabla: Periodically check all cables and connectors for signs of wear, fraying, or damage. Ensure they are securely plugged in.
- Preverjanje pritrdilnih elementov: Regularly inspect all mounting bolts and fasteners on the motor, display, and other components. Tighten any loose fasteners to prevent vibration damage.
- Veriga in pogonski sklop: Maintain your bicycle's chain and drivetrain (chainwheel, cassette, derailleur) as you would a regular bicycle. Keep the chain clean and lubricated.
- Vzdrževanje baterije: Follow the battery manufacturer's instructions for charging, storage, and maintenance. Avoid fully discharging the battery and store it in a cool, dry place.
- Hrup motorja: If you notice unusual noises from the motor, discontinue use and inspect for any issues.
7. Odpravljanje težav
V tem razdelku so rešitve za pogoste težave, na katere lahko naletite. Za bolj zapletene težave se obrnite na tehnično podporo.
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Motor does not turn on/no power to display. | Battery not connected, low battery, loose power cable, faulty display. | Check battery connection and charge level. Ensure all power cables are securely connected. Test display if possible. |
| Motor provides no assist when pedaling. | Assist level set to 0, speed sensor misalignment/damage, brake lever engaged, loose motor cable. | Increase assist level on display. Check speed sensor alignment and connection. Ensure brake levers are fully released. Inspect motor cable connections. |
| Inaccurate speed reading on display. | Speed sensor misalignment, magnet missing, incorrect wheel size setting. | Adjust speed sensor and magnet position. Verify wheel size setting in DPC18 display menu. |
| Motor oddaja nenavaden hrup. | Loose mounting bolts, internal motor issue, foreign object. | Check and tighten motor mounting bolts. Discontinue use and contact support if noise persists. |
8. Specifikacije
Key technical specifications for the HALLOMOTOR M620 G510 Mid Drive Motor Conversion Kit.
Image 5: Technical specifications and dimensions of the motor.
| Funkcija | Podrobnost |
|---|---|
| Vrsta motorja | Mid Drive Motor (M620 G510) |
| Nazivna voltage | 48 V / 52 V DC |
| Nazivna moč | 1000 W |
| Max Torque | 160 Nm |
| Gradnja | Zobniški pogon |
| Učinkovitost | ≥ 80 % |
| Stopnja hrupa | < 55dB |
| Vodoodporen razred | IP65 |
| Zaslon | DPC18 (UART Protocol) |
| Standardna gred | ISIS |
| Neto teža motorja | 5.3 kg |
| Delovna temperatura | -20°C do 80°C |
| Certifikati | CE/EN14764/ROHS |
9. Garancija in podpora
HALLOMOTOR products are typically covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary. Please retain your proof of purchase for warranty claims.
9.1 Garancijski zahtevki
In the event of a warranty claim, please contact your original point of purchase or HALLOMOTOR customer support with your product details and proof of purchase. Do not attempt to repair the motor or components yourself, as this may void the warranty.
9.2 Tehnična podpora
For technical assistance, troubleshooting beyond this manual, or inquiries about parts, please contact HALLOMOTOR customer service. Provide your product model number and a detailed description of the issue to receive efficient support.
Contact information for HALLOMOTOR support can typically be found on their official webspletnem mestu ali prek vašega prodajalca.
