Philips DayBrite CFI Linear SDS Selectable Strip LED Luminaire

1. Izdelek je končanview

The Philips DayBrite CFI Linear SDS Selectable Strip is a versatile 2-foot LED luminaire designed for various indoor lighting applications. This fixture offers field-selectable color temperatures (3500K, 4000K, 5000K) and lumen outputs (1200, 1800, 2400 lumens), providing flexibility to meet specific lighting requirements. It features 0-10V dimming capability for precise light level control.

Figure 1: Philips DayBrite CFI Linear SDS Selectable LED Strip Luminaire. This image shows the full length of the white linear LED strip light, featuring a frosted diffuser for even light distribution and a sleek, minimalist design suitable for various indoor installations.

2. Varnostne informacije

Pred namestitvijo in uporabo natančno preberite vsa navodila. Neupoštevanje teh navodil lahko povzroči električni udar, požar ali druge nevarnosti. Ta priročnik shranite za poznejšo uporabo.

• OPOZORILO: Nevarnost električnega udara. Pred namestitvijo ali servisiranjem izklopite varovalko ali odklopnik.
• Installation must be performed by a qualified electrician in accordance with all applicable national and local electrical codes.
• Do not install in wet locations or near flammable materials.
• Zagotovite dovodni voltage is compatible with the luminaire's requirements (120-277V AC).
• Svetilke ne spreminjajte na noben način.
• Handle with care to avoid damage to LED components.

3. Vsebina paketa

Po odprtju embalaže preverite, ali so vse komponente prisotne in nepoškodovane:

• 1 x Philips DayBrite CFI Linear SDS Selectable Strip LED Luminaire
• 1 x Navodila za namestitev (ta dokument)
• Mounting Hardware (e.g., screws, anchors - se lahko razlikuje glede na paket)

4. Nastavitev in namestitev

This luminaire is designed for surface mounting. Professional installation is recommended.

1. Pripravite območje namestitve: Ensure the mounting surface is structurally sound and can support the weight of the fixture. Turn off power at the circuit breaker before beginning installation.
2. Označite pritrdilne točke: Use the luminaire as a template to mark the desired mounting locations on the ceiling or wall. Ensure marks are level and spaced correctly for secure attachment.
3. Namestitev montažne strojne opreme: Drill pilot holes at the marked locations. Insert appropriate anchors if mounting into drywall or plaster. Secure the mounting brackets (if separate) or the luminaire directly using screws.
4. Žične povezave:
   • Connect the AC power supply wires (Line, Neutral, Ground) from the junction box to the corresponding wires on the luminaire. Follow local electrical codes for proper wiring.
   • For 0-10V dimming, connect the purple (DIM+) and gray (DIM-) wires from the luminaire to the corresponding wires on your 0-10V dimming control system. Ensure polarity is correct.
   • Vse žične povezave pritrdite z ustreznimi žičnimi maticami ali konektorji.
5. Zavarujte svetilko: Once wiring is complete and connections are secure, attach the luminaire firmly to the mounting surface. Ensure no wires are pinched.
6. Obnovi moč: Turn on power at the circuit breaker. Test the luminaire for proper operation and dimming functionality.

5. Navodila za uporabo

This luminaire features field-selectable color temperature and lumen output settings.

• Izbira barvne temperature: Locate the CCT (Correlated Color Temperature) selector switch on the luminaire. This switch allows you to choose between 3500K (Warm White), 4000K (Cool White), and 5000K (Daylight) settings. Ensure power is off before adjusting this switch.
• Lumen Output Selection: Locate the Lumen selector switch on the luminaire. This switch allows you to choose between 1200, 1800, and 2400 lumens. Ensure power is off before adjusting this switch.
• 0-10V zatemnitev: Once installed and wired to a compatible 0-10V dimmer, the light output can be adjusted smoothly from 100% down to 10% (or lower, depending on dimmer specifications) using the external dimming control.

6. Vzdrževanje

The Philips DayBrite CFI Linear SDS Selectable Strip LED Luminaire requires minimal maintenance.

• Čiščenje: Pred čiščenjem izključite napajanje. Uporabite mehko, suho ali rahlo mehko krpo.amp cloth to wipe the exterior surface of the luminaire. Do not use abrasive cleaners, solvents, or cleaners containing alcohol, as these may damage the finish or optical components.
• LED: The LEDs are integrated and do not require replacement.

7. Odpravljanje težav

If you experience issues with your luminaire, refer to the following common problems and solutions:

Če težava po poskusu teh rešitev še vedno obstaja, se obrnite na podporo strankam.

8. Specifikacije

9. Informacije o garanciji

This Philips DayBrite product is covered by a manufacturer's limited warranty. Please refer to the warranty card included with your purchase or visit the official Signify webZa podrobne garancijske pogoje obiščite spletno mesto. Shranite dokazilo o nakupu za uveljavljanje garancije.

10. Podpora strankam

For technical assistance, product inquiries, or warranty claims, please contact Signify customer support:

• Webspletno mesto: Visit the official Signify or Philips Lighting webspletno mesto za vire podpore, pogosta vprašanja in kontaktne podatke.
• telefon: Glejte kontaktne podatke, navedene na embalaži izdelka, ali proizvajalčeve webmesto.

When contacting support, please have your product model number (SDS21224L8CST-UNV-DIM) and proof of purchase readily available.