Uvod
This manual provides essential instructions for the safe installation, operation, and maintenance of your EGLO Salvilanas Integrated LED Ceiling Light. Please read this manual thoroughly before installation and retain it for future reference.
The EGLO Salvilanas light features an integrated LED, a black finish, and a white diffuser, designed for indoor use in various rooms such as kitchens, dining rooms, bedrooms, and hallways. It can be mounted on ceilings or walls.
Varnostne informacije
- OPOZORILO: Nevarnost električnega udara. Pred namestitvijo ali servisiranjem izklopite napajanje na odklopniku ali v omarici z varovalkami.
- All wiring connections must be in accordance with local and national electrical codes. If you are unfamiliar with proper electrical wiring, consult a qualified electrician.
- Do not install this fixture in wet locations. It is designed for indoor use only and is not water resistant.
- Prepričajte se, da površina za montažo lahko prenese težo naprave.
- Do not attempt to modify the integrated LED components.
- Embalažni material hranite izven dosega otrok.
Vsebina paketa
Pred začetkom namestitve preverite, ali so prisotne vse komponente:
- EGLO Salvilanas Integrated LED Ceiling Light fixture (1)
- White plastic diffuser (1)
- Mounting hardware kit (screws, wire nuts, etc.) (1 set)
- Navodila za uporabo (1)
Nastavitev in namestitev
This fixture is designed for semi-flush mount installation on ceilings or walls.
1. Priprava
- Izklopite napajanje na glavnem odklopniku ali v omarici z varovalkami.
- Carefully unpack the fixture and its components. Keep all parts organized.
- Identify the mounting location. Ensure it is a dry, indoor area and the electrical box is securely mounted.
2. Montaža napeljave
Refer to the diagram below for general mounting steps. Specific hardware may vary.
Image: The EGLO Salvilanas Integrated LED Ceiling Light, demonstrating its sleek design suitable for ceiling or wall mounting.
- Attach the mounting bracket (if separate) to the electrical junction box using the provided screws.
- Povežite električne žice:
- Connect the black wire from the fixture to the black (live) wire from the junction box.
- Belo žico iz svetilke priključite na belo (nevtralno) žico iz razvodne omarice.
- Connect the ground wire from the fixture to the ground wire from the junction box.
- Zavarujte vse povezave z žičnimi maticami in električnim trakom.
- Previdno vstavite vse žice v razdelilno omarico.
- Align the fixture with the mounting bracket and secure it using the provided screws or twist-lock mechanism.
- Install the white plastic diffuser onto the fixture according to its design (e.g., twist-lock, clips).
3. Končni koraki
- Obnovite napajanje na odklopniku.
- Preizkusite svetilko.
Navodila za uporabo
The EGLO Salvilanas LED Ceiling Light is designed for easy operation.
- Vklop/izklop: The light can be controlled via a wall switch connected to the fixture's power supply.
- Nadzorne metode: This fixture supports control via a remote control and a compatible app. Refer to the separate instructions provided with your remote control or app for pairing and advanced features.
- Barva svetlobe: The integrated LED provides a warm white light.
Vzdrževanje
To ensure the longevity and appearance of your EGLO Salvilanas LED Ceiling Light, follow these simple maintenance guidelines:
- Čiščenje: Pred čiščenjem izključite napajanje. Uporabite mehko, suho ali rahlo mehko krpo.amp cloth to wipe the exterior surfaces. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or diffuser.
- LED komponente: The integrated LED light source is designed for long-term use and is not user-replaceable. Do not attempt to open or service the LED module.
- Nega difuzorja: Handle the white plastic diffuser with care to avoid scratches or damage.
Odpravljanje težav
If you experience issues with your light fixture, try the following solutions:
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Luč se ne vklopi. | Brez napajanja na napeljavo. Ohlapna žična povezava. Okvarjeno stensko stikalo. |
Preverite odklopnik. Preverite, ali so vse žične povezave varne (ko je napajanje izklopljeno). Preverite stensko stikalo ali ga po potrebi zamenjajte. |
| Svetloba utripa. | Ohlapna napeljava. Nezdružljivo zatemnilno stikalo (če je primerno). |
Preverite ožičenje (ko je napajanje izklopljeno). Ensure any dimmer switch is LED-compatible. |
| Remote control/App not working. | Baterije mrtve. Ni pravilno seznanjeno. Motnje signala. |
Zamenjajte baterije daljinskega upravljalnika. Refer to remote/app instructions for pairing. Ensure no obstructions or strong interference sources. |
Če ti koraki ne odpravijo težave, se obrnite na podporo strankam.
Specifikacije
| Znamka: | EGLO |
| Številka modela: | 206019A |
| Vir svetlobe: | Integrirana LED |
| Wattage: | 21 vatov |
| Svetlost: | 2850 lumnov |
| Učinkovitost: | 135.71 lumnov/vat |
| Barva svetlobe: | Topla bela |
| voltage: | 12 voltov (DC) |
| Material: | Alloy Steel, Metal (fixture), Plastic (shade) |
| Končaj: | Black (fixture), White (diffuser) |
| Dimenzije (D x Š x V): | 30.32 cm x 8 cm x 1.5 cm |
| Teža artikla: | 5 funta |
| Vrsta namestitve: | Polporavnana montaža |
| Nadzorna metoda: | Aplikacija, daljinski upravljalnik |
| Notranja/zunanja uporaba: | Notranja |
| Stopnja vodoodpornosti: | Ni vodoodporen |
Garancija
Ta izdelek EGLO je zajet v 1-letna garancija proizvajalca from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modifications. Please retain your proof of purchase for warranty claims.
Podpora
For further assistance, technical support, or warranty inquiries, please refer to the contact information provided with your product packaging or visit the official EGLO website. When contacting support, please have your model number (206019A) and proof of purchase readily available.
