Xigmatek Blade Computer Case User Manual

1. Uvod

Thank you for choosing the Xigmatek Blade ATX Computer Case. This manual provides essential information for the proper installation, operation, and maintenance of your new computer chassis. The Xigmatek Blade is designed for high-performance PC builds, featuring a spacious ATX structure, a stylish tempered glass side panel, and efficient cooling with pre-installed 120mm fans.

2. Varnostne informacije

Please read and understand all safety instructions before installing or operating the computer case. Failure to do so may result in personal injury or damage to the product.

• Pred kakršno koli namestitvijo ali vzdrževanjem v ohišju vedno izključite napajalnik iz stenske vtičnice.
• Be aware of sharp edges inside the chassis. Handle components with care to avoid cuts.
• Wear an anti-static wrist strap when handling internal components to prevent electrostatic discharge (ESD) damage.
• Zagotovite ustrezno prezračevanje okoli ohišja, da preprečite pregrevanje.
• Keep the case away from liquids, excessive heat, and direct sunlight.

3. Vsebina paketa

Preverite, ali so v paketu prisotni vsi elementi:

• Xigmatek Blade ATX Computer Case
• Škatla s priborom (vsebuje vijake, distančnike, kabelske vezice itd.)
• Uporabniški priročnik (ta dokument)

4. Nastavitev in namestitev

Follow these steps for proper assembly and installation of your PC components into the Xigmatek Blade case.

4.1. Priprava

• Unpack the case carefully and place it on a stable, flat surface.
• Gather necessary tools: Phillips head screwdriver, cable ties (some included), anti-static wrist strap.

Slika 1: Sprednja stran view of the Xigmatek Blade ATX Computer Case, showcasing the tempered glass panel and three front-mounted RGB fans, along with a single rear RGB fan.

4.2. Namestitev matične plošče

1. Namestite V/I zaščito v zadnjo odprtino ohišja.
2. Align the motherboard with the pre-installed standoffs. Ensure the standoffs match your motherboard's form factor (Micro ATX compatible).
3. Secure the motherboard using the provided screws. Do not overtighten.

4.3. Namestitev napajalne enote (PSU)

1. Mount the PSU into the designated rear bottom compartment.
2. Napajalnik pritrdite z vijaki na zadnji strani ohišja.
3. Route the necessary power cables through the cable management cutouts.

Slika 2: Zadaj view of the Xigmatek Blade ATX Computer Case, showing the power supply mounting area, expansion slots, and the exhaust fan.

4.4. Namestitev pogona za shranjevanje

• Locate the 2.5" SSD/3.5" HDD drive bays.
• Install your storage drives using the appropriate screws.

4.5. Namestitev grafične kartice in razširitvene kartice

1. Z zadnje strani ohišja odstranite potrebne pokrove rež PCIe.
2. Vstavite grafično kartico ali druge razširitvene kartice v reže PCIe na matični plošči.
3. Kartice pritrdite z vijaki.

4.6. Upravljanje kablov

Za organizacijo kablov uporabite izreze za napeljavo kablov in pritrdilne točke za pladnjem matične plošče. To izboljša pretok zraka in estetiko.

4.7. Priključki na sprednji plošči

Connect the front panel cables (Power SW, Reset SW, HDD LED, Power LED, USB 2.0/3.0, HD Audio) to the corresponding headers on your motherboard. Refer to your motherboard manual for exact pin layouts.

5. Delovanje

Once all components are installed and cables are connected, you can power on your system.

• Gumb za vklop: Located on the top/front panel of the case. Press to turn on or off your PC.
• Gumb za ponastavitev: Located near the power button. Press to restart your PC.
• Vrata USB: Use the front USB ports for connecting peripherals.
• Avdio priključki: Connect headphones and microphones to the front audio jacks.

6. Vzdrževanje

Redno vzdrževanje pomaga zagotoviti optimalno delovanje in dolgo življenjsko dobo komponent vašega računalnika.

• Filtri za prah: The Xigmatek Blade case may include removable dust filters (e.g., on the top, front, or bottom). Clean these filters regularly (monthly or bi-monthly) by removing them and washing with water or brushing off dust. Allow them to dry completely before re-installing.
• Čiščenje notranjosti: Periodically use compressed air to blow dust out of the case interior, especially from fans, heatsinks, and vents.
• Čiščenje zunanjosti: Obrišite zunanje površine z mehko damp krpo. Izogibajte se močnim kemikalijam.

7. Odpravljanje težav

If you encounter issues with your Xigmatek Blade case, refer to the following common troubleshooting tips:

• Brez napajanja:
  • Prepričajte se, da je napajalnik vklopljen in pravilno priključen v stensko vtičnico.
  • Preverite, ali je kabel stikala za vklop na sprednji plošči pravilno priključen na konektor matične plošče.
  • Preverite vse napajalne povezave do matične plošče in komponent.
• Ventilatorji se ne vrtijo:
  • Confirm that the fan cables are securely connected to the motherboard fan headers or a fan controller.
  • Check BIOS/UEFI settings to ensure fan control is enabled and not set to a very low RPM.
• USB/zvok na sprednji plošči ne deluje:
  • Ensure the USB and audio headers from the front panel are correctly plugged into the motherboard.
  • Check your operating system's device manager for driver issues.
• Pregrevanje:
  • Očistite filtre za prah in notranje komponente, kot je opisano v poglavju Vzdrževanje.
  • Ensure proper airflow by checking fan orientation and cable management.
  • Consider adding more fans or upgrading your CPU cooler if temperatures remain high.

8. Specifikacije

Key specifications for the Xigmatek Blade Computer Case:

9. Garancija in podpora

Xigmatek products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Xigmatek webspletnega mesta. Shranite dokazilo o nakupu za uveljavljanje garancije.

For technical support or further inquiries, please contact Xigmatek customer service through their official channels. You can typically find contact information on the Xigmatek webmesto.

Note: Specific warranty details and support contact information are not provided in this general manual. Please refer to the manufacturer's official resources.