Firecore F94T-XG 3 X 360 Laser Level and FT1500D Tripod User Manual

1. Uvod

Thank you for choosing the Firecore F94T-XG 3 X 360 Laser Level and FT1500D Tripod. This comprehensive system provides an all-in-one leveling and alignment solution for various applications. The F94T-XG laser level projects three 360° green laser planes, offering superior visibility and precision for tasks such as aligning, leveling, plumbing, and squaring. Paired with the adjustable FT1500D aluminum alloy tripod, this kit ensures stable and accurate measurements for both interior and exterior projects. Please read this manual thoroughly before operation to ensure safe and effective use of your new tool.

2. Varnostne informacije

WARNING: Read and understand all safety warnings and instructions before operating this laser level. Failure to follow the warnings and instructions may result in serious injury.

2.1 Laserska varnost

This product is a Class II laser product, with a power output of less than 1mW and a wavelength of 505-520nm. Direct eye exposure to the laser beam should be avoided.

• Ne glejte neposredno v laserski žarek.
• Laserskega žarka ne usmerjajte namerno v druge ljudi ali odsevne površine.
• Laserskega nivelirja ne uporabljajte v eksplozivnih okoljih, na primer v prisotnosti vnetljivih tekočin, plinov ali prahu.
• Lasersko libelo hranite izven dosega otrok.
• Uporabljajte samo navedene baterije in načine polnjenja.

2.2 Splošna varnost

• Always ensure the work area is clear and well-lit.
• Do not modify the laser level or tripod.
• Protect the device from extreme temperatures, water, and impact.
• Clean the laser level with a soft, dry cloth. Do not use solvents.

3. Vsebina paketa

The Firecore F94T-XG Laser Level and FT1500D Tripod kit includes the following items:

• Firecore F94T-XG 3 X 360 Laser Level
• Firecore FT1500D 60-inch Aluminum Alloy Laser Tripod
• 2 x 7.4V / 2600mAh Rechargeable Li-ion Batteries
• Type-C Charging Cable and Power Adapter
• Magnetic Pivoting Base
• Green Target Plate
• Uporabniški priročnik
• Carrying Case for Laser Level
• Shoulder Strap Bag for Tripod

4. Izdelek je končanview

4.1 Firecore F94T-XG Laser Level

The F94T-XG is a robust and precise laser level designed for demanding job sites. It features an over-molded housing and IP65 water/dust resistance for durability.

• 3 x 360° Green Laser Lines: One horizontal and two vertical planes for full room coverage.
• Visoka vidljivost: Green beams are up to 4X brighter than standard red beams.
• Smart Pendulum System: Self-levels within ±4° in 3 seconds and indicates out-of-level conditions.
• Pulzni način: Extends working range up to 197 ft (60m) with a Firecore FD30 laser detector.
• Vgrajen magnetni nosilec: Features 1/4 in. and 5/8 in. threads for versatile mounting.
• Disturbance Monitor: High-precision electronic motion sensor alerts if the tool position changes, ensuring consistent accuracy.

4.2 Firecore FT1500D Laser Tripod

The FT1500D tripod provides a stable and adjustable platform for your laser level, suitable for various applications.

• Nastavljiva višina: Expands from 20 inches to 60 inches (50 cm to 150 cm).
• Material: Crafted from quality aluminum for durability and lightweight portability.
• Dizajn glave: Flat head with 1/4-inch x 20 threaded studs, compatible with the F94T-XG.
• Hitro snemljiv Clamps: For easy and secure leg adjustments.

5. Nastavitev

5.1 Namestitev in polnjenje baterije

The F94T-XG uses two 7.4V / 2600mAh rechargeable Li-ion batteries.

1. Open the battery compartment cover on the back of the laser level.
2. Insert the rechargeable Li-ion battery packs, ensuring correct polarity.
3. Trdno zaprite pokrov prostora za baterije.
4. To charge, connect the Type-C charging cable to the battery pack (if charging separately) or directly to the laser level. Connect the power adapter to a suitable power outlet. The charging indicator will show charging status.

5.2 Attaching Laser Level to Tripod

The FT1500D tripod features both 1/4-inch and 5/8-inch mounting threads for compatibility.

1. Extend the tripod legs and central column to your desired height. Use the quick-release clampjih zavarovati.
2. Place the F94T-XG laser level onto the tripod head. The laser level's base has a 1/4-inch thread.
3. Secure the laser level by rotating the mounting screw on the tripod head until it is firmly attached.

6. Navodila za uporabo

6.1 Vklop in način samoniveliranja

The F94T-XG features a Smart Pendulum System for automatic leveling.

1. Unlock the pendulum by sliding the pendulum lock switch to the unlocked position.
2. Press the power button to turn on the laser level. The laser lines will activate.
3. Place the laser level on a stable surface or tripod. The Smart Pendulum System will automatically self-level within ±4°.
4. If the device is out of its self-leveling range, the laser lines will flash rapidly to indicate an out-of-level condition. Adjust the position of the laser level until the lines stop flashing and become steady.

6.2 Manual Mode (Locking Lines)

For applications requiring lines at an angle, you can lock the pendulum.

1. With the pendulum lock switch in the locked position, press and hold the power button for a few seconds to activate Manual Mode.
2. The laser lines will turn on and remain steady, allowing you to project lines at any desired angle. The out-of-level alarm will be deactivated in this mode.

6.3 Pulse Mode (Detector Use)

Pulse mode extends the working range of the laser level, especially in bright lighting or outdoor conditions, when used with a compatible laser detector (e.g., Firecore FD30).

1. In self-leveling mode, press the dedicated Pulse Mode button (if available, or cycle through modes) to activate Pulse Mode. The laser lines may appear dimmer to the naked eye but will be detectable by the receiver.
2. Follow the instructions for your specific laser detector to locate the laser line at extended distances.

6.4 Aplikacije

The Firecore F94T-XG is versatile for various professional and DIY applications.

• Room layout and partitioning
• Alignment of conduit, lighting, and fixtures
• Flooring and tiling installation
• Drywall and window framing
• Cabinet and shelf installation

7. Vzdrževanje

7.1 Čiščenje

• Regularly clean the laser level and tripod with a soft, dry cloth.
• Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the housing or optical components.
• Keep the laser apertures clean to ensure clear and accurate laser lines.

7.2 Shranjevanje

• Always lock the pendulum before storing or transporting the laser level to prevent damage to the internal mechanism.
• Store the laser level and tripod in their respective carrying cases when not in use.
• Hraniti na hladnem in suhem mestu, stran od neposredne sončne svetlobe in ekstremnih temperatur.
• If storing for extended periods, remove the batteries from the laser level.

7.3 Skrb za baterije

• Pred prvo uporabo popolnoma napolnite baterije.
• Do not expose batteries to excessive heat or direct flame.
• Baterije zavrzite v skladu z lokalnimi predpisi.

8. Odpravljanje težav

If you encounter issues with your Firecore F94T-XG laser level, refer to the table below for common problems and solutions.

9. Specifikacije

10. Garancija in podpora

Firecore products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official Firecore website. If you have any questions, require technical assistance, or need to report an issue, please contact Firecore customer support through the following channels:

• Uradno Webspletno mesto: www.firecoretools.com (Nprample, actual link not provided in data)
• Podpora po e-pošti: Glejte embalažo izdelka ali uradna navodila. webspletno mesto za kontaktni e-poštni naslov.
• Trgovina Amazon: Obiščite Firecore Store on Amazon for product information and support options.

Please have your model number (F94T-XG) and purchase date ready when contacting support.