OSRAM Base Classic A FIL 40 LED Bulb E27 Instruction Manual

1. Izdelek je končanview

The OSRAM Base Classic A FIL 40 LED Bulb is a modern, energy-efficient lighting solution designed for general illumination in household and interior applications. This LED bulb provides a warm white light (2700 Kelvin) with a brightness of 470 lumens, equivalent to a traditional 40-watt incandescent bulb, while consuming only 4 watts of power. It features an E27 screw base for easy installation and a long operational life of up to 10,000 hours.

Glavne lastnosti vključujejo:

• Pleasant Light: Delivers good light quality and instant 100% light without warm-up time.
• Robustna zasnova: Resistant to shocks and vibrations due to advanced LED technology.
• Dolga življenjska doba: Offers an extended operational life of up to 10,000 hours.
• Varčevanje z energijo: Very low energy consumption, making it highly efficient.
• Optimalna temperatura: Generates lower heat compared to standard incandescent bulbs.

Figure 1: OSRAM Base Classic A FIL 40 LED Bulb, showcasing its classic shape and E27 base.

2. Varnostne informacije

• Električna varnost: Always ensure the power supply is switched off before installing, removing, or cleaning the bulb to prevent electric shock.
• voltage Združljivost: This bulb is designed for 220-240 Volts. Ensure your fixture's voltage ustreza tej zahtevi.
• Združljivost zatemnitve: Ta izdelek je not suitable for use with dimmers. Using it with a dimmer may cause damage to the bulb or the dimmer, and will void the warranty.
• Uporaba v zaprtih prostorih: Primarily for indoor use. If used outdoors, it must be installed in a suitable, enclosed outdoor fixture to protect it from elements.
• Proizvodnja toplote: While LED bulbs generate less heat than incandescent bulbs, they still produce some heat. Ensure adequate ventilation around the bulb.
• Odstranjevanje: Dispose of used bulbs according to local regulations for electronic waste. Do not dispose of with general household waste.

3. Nastavitev in namestitev

Follow these steps to safely install your OSRAM LED bulb:

1. Ugasniti: Before beginning, ensure the power supply to the light fixture is completely switched off at the main switch or circuit breaker.
2. Odstranite staro žarnico: If replacing an existing bulb, allow it to cool down completely before carefully unscrewing it counter-clockwise from the E27 socket.
3. Preglejte vtičnico: Check the E27 socket for any damage or debris. Ensure it is clean and dry.
4. Namestite novo žarnico: Gently screw the OSRAM LED bulb clockwise into the E27 socket until it is finger-tight. Do not overtighten.
5. Obnovi moč: Once the bulb is securely installed, restore power to the light fixture.
6. Test: Vklopite stikalo za luč, da preverite, ali žarnica deluje pravilno.

Figure 2: Close-up of the OSRAM LED bulb, highlighting the E27 screw base for installation.

4. Delovanje

Operating the OSRAM Base Classic A FIL 40 LED Bulb is straightforward:

• Vklop/izklop: Za vklop ali izklop žarnice uporabite standardno stensko stikalo, priključeno na vašo svetilko.
• Takojšnja svetloba: The LED bulb provides instant 100% light output immediately upon switching on, with no warm-up time required.
• Brez možnosti zatemnitve: As noted in the safety section, this bulb is not dimmable. It will operate at full brightness when switched on.

5. Vzdrževanje

The OSRAM LED bulb requires minimal maintenance:

• Čiščenje: Ensure the power is off and the bulb is cool before cleaning. Wipe the bulb gently with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Zamenjava: Zaradi dolge življenjske dobe ni pričakovati pogoste menjave. Ko je zamenjava potrebna, sledite korakom za namestitev v 3. poglavju.
• Brez delov, ki bi jih lahko servisiral uporabnik: Žarnica ne vsebuje delov, ki bi jih lahko uporabnik sam popravil. Ne poskušajte odpirati ali popravljati žarnice.

6. Odpravljanje težav

If you encounter issues with your OSRAM LED bulb, refer to the following common troubleshooting steps:

• Žarnica ne sveti:
  • Prepričajte se, da je napajanje svetilke vklopljeno.
  • Check that the bulb is screwed in securely into the E27 socket.
  • Test the bulb in another working fixture to rule out a faulty fixture.
  • If the bulb still does not light up, it may be faulty and require replacement.
• Utripanje ali zatemnitev:
  • Confirm that the bulb is not connected to a dimmer switch, as this bulb is not dimmable.
  • Preverite, ali so povezave v napeljavi ali ožičenju ohlapne.
  • Zagotovite voltage supply is stable and within the bulb's specified range (220-240V).
• Nenavaden hrup:
  • LED bulbs are generally silent. If you hear buzzing, ensure the bulb is not on a dimmer circuit.
  • Preverite, ali so v pritrdilnem elementu ohlapne povezave.

7. Specifikacije

Figure 3: Technical drawing illustrating the dimensions of the OSRAM LED bulb. The 'd' indicates diameter and the vertical line indicates height.

Figure 4: EU Energy Label for the LEDVANCE AC32396 (OSRAM) LED bulb, indicating an energy efficiency class of E and consumption of 4 kWh/1000h. For more details, visit the official EPREL database: Povezava do baze podatkov EPREL.

8. Garancija in podpora

For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official OSRAM webspletnega mesta. Shranite dokazilo o nakupu za uveljavljanje garancije.