WEN BG625V 6-Inch Variable Speed Bench Grinder & 6502T 4x36-Inch Belt and 6-Inch Disc Sander Instruction Manual

1. Uvod

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your WEN BG625V 2.5-Amp 6-Inch Variable Speed Bench Grinder with Flexible Work Light and WEN 6502T 4.3-Amp 4 x 36 in. Belt and 6 in. Disc Sander. Please read and understand all instructions before using the tools.

2. Varnostna navodila

Always wear appropriate personal protective equipment, including safety glasses or a face shield, hearing protection, and gloves, when operating these tools. Ensure the work area is clean, well-lit, and free from obstructions. Keep children and bystanders away from the operating machinery. Disconnect power before making adjustments or changing accessories.

• Zavarujte obdelovanec: Obdelovanec vedno trdno držite ob naslonu orodja.
• Pravilno prezračevanje: Operate in a well-ventilated area to avoid inhaling dust and debris.
• Izogibajte se ohlapnim oblačilom: Ne nosite ohlapnih oblačil, nakita ali dolgih las, ki bi se lahko zapletli v gibljive dele.
• Preglejte orodja: Before each use, inspect grinding wheels and sanding belts for damage or wear. Replace as needed.
• Ustavitev v sili: Familiarize yourself with the location of the power switch for quick shutdown.

3. Izdelek je končanview: WEN BG625V 6-Inch Variable Speed Bench Grinder

The WEN BG625V Bench Grinder is designed for sharpening, deburring, and cleaning various materials. It features two grinding wheels and a flexible work light for enhanced visibility.

Ključne komponente:

• Brusilna kolesa: Includes one 80-grit wheel for general purpose grinding and one 36-grit wheel for faster material removal.
• Flexible Work Light: Illuminates the workpiece for improved visibility during operation.
• Adjustable Eye Guards: Transparent shields to protect eyes from sparks and debris.
• Pivoting Tool Rests: Adjustable platforms to support the workpiece during grinding.
• Nadzor spremenljive hitrosti: Allows adjustment of RPM from 2000 to 3400.

4. Izdelek je končanview: WEN 6502T 4x36-Inch Belt and 6-Inch Disc Sander

The WEN 6502T Belt and Disc Sander is a versatile tool for sanding, smoothing, and removing jagged edges and splinters from wood and lumber.

Ključne komponente:

• 4 x 36-Inch Belt Sander: Tilts from 0 to 90 degrees for various sanding applications.
• 6-Inch Disc Sander: Accompanied by a sturdy cast-aluminum work table.
• Merilnik zajeranja: For steady sanding on angled edges.
• Stop Bar: For safety and control during operation.
• Odprtina za prah: 2.25-inch port to connect a dust extractor for a cleaner workspace.
• Litoželezna osnova: Heavy base designed to prevent vibrations.

5. Nastavitev

5.1 Razpakiranje in pregled

Carefully remove all components from the packaging. Inspect for any shipping damage. Report any damage immediately to your retailer. Ensure all parts listed in the packing list are present.

5.2 Assembly (Bench Grinder)

1. Attach the pivoting tool rests to the grinder housing using the provided hardware. Adjust them to be approximately 1/16 inch from the grinding wheels.
2. Install the adjustable eye guards above the grinding wheels. Ensure they can be positioned to protect your eyes during use.
3. Insert a light bulb (not included) into the flexible work light socket if desired.

5.3 Assembly (Belt and Disc Sander)

1. Attach the cast-aluminum work table to the disc sander.
2. Install the miter gauge into the slot on the work table.
3. Attach the stop bar as needed for specific sanding tasks.
4. Connect a dust extractor to the 2.25-inch dust port for efficient dust collection.

5.4 Montaža

For stable operation, both tools should be securely mounted to a workbench. Use appropriate bolts and washers through the designated mounting holes in the base of each unit. Ensure the workbench is sturdy and level.

6. Navodila za uporabo

6.1 WEN BG625V Bench Grinder Operation

1. Vklop: Plug the grinder into a suitable power outlet and flip the power switch to the 'ON' position.
2. Prilagodi hitrost: Use the variable speed control knob to set the desired RPM (2000 to 3400 RPM) for your task.
3. Položaj obdelovanca: Place the workpiece firmly on the pivoting tool rest, ensuring it is stable.
4. Brušenje: Gently bring the workpiece into contact with the rotating grinding wheel. Apply light, even pressure. Move the workpiece across the wheel to ensure even wear and consistent results.
5. Ostrenje: For sharpening tools, maintain a consistent angle against the wheel. Use the appropriate grit for the desired sharpness.
6. Flexible Work Light: Adjust the flexible work light to illuminate your work area as needed.

6.2 WEN 6502T Belt and Disc Sander Operation

1. Vklop: Plug the sander into a suitable power outlet and flip the power switch to the 'ON' position.
2. Adjust Belt Angle: The sanding belt can be tilted from 0 to 90 degrees. Loosen the locking knob, adjust the belt to the desired angle, and re-tighten the knob.
3. Disc Sander Table: Adjust the angle of the cast-aluminum work table for the disc sander as required for angled sanding.
4. Brušenje: Apply the workpiece gently to the moving belt or rotating disc. Use even pressure and move the workpiece to prevent uneven sanding or overheating.
5. Merilnik zajeranja: Use the miter gauge for precise angle sanding on the disc table.
6. Stop Bar: Utilize the stop bar for added safety and control, especially with smaller workpieces.

7. Vzdrževanje

Regular maintenance ensures the longevity and optimal performance of your WEN tools.

• Čiščenje: Regularly clean dust and debris from both tools using a vacuum or compressed air. Ensure the dust port on the sander is clear.
• Zamenjava brusa: When grinding wheels become worn or glazed, replace them. Disconnect power, remove the wheel guards, loosen the arbor nut, and replace the wheel. Ensure new wheels are properly balanced and tightened.
• Sanding Belt/Disc Replacement: Replace sanding belts and discs when they lose their abrasive quality. Follow the instructions in the full product manual for specific replacement procedures.
• Mazanje: Periodically check for any moving parts that may require lubrication. Refer to the full manual for specific lubrication points.

8. Odpravljanje težav

If you encounter issues with your WEN tools, refer to the following common troubleshooting tips:

For more detailed troubleshooting, please consult the complete product manual or contact WEN customer support.

9. Specifikacije

WEN BG625V 6-palčni namizni brusilnik s spremenljivo hitrostjo

• Motor: 2.5-Amp Spremenljiva hitrost
• Hitrost: 2000 do 3400 RPM
• Brusilna kolesa: One 80-grit, One 36-grit (6-inch diameter, 3/4-inch width, 1/2-inch arbor)
• Lastnosti: Flexible Work Light, Adjustable Eye Guards, Pivoting Tool Rests
• Material: Aluminij
• barva: Črna

WEN 6502T 4x36-Inch Belt and 6-Inch Disc Sander

• Motor: 4.3-Amp, 1/2 KM
• Hitrost: Do 3600 RPM
• Velikost pasu: 4 x 36 inches (tilts 0 to 90 degrees)
• Velikost diska: 6 palcev
• Lastnosti: Cast Iron Base, Cast-Aluminum Work Table, Miter Gauge, Stop Bar, 2.25-inch Dust Port
• Material: Aluminij
• barva: Črna

10. Garancija in podpora

Your WEN BG625V Bench Grinder and WEN 6502T Belt and Disc Sander are backed by a dvoletna garancija. WEN maintains a stocked inventory of replacement parts and offers a friendly customer phone line for support.

For warranty claims, replacement parts, or technical assistance, please contact WEN customer service. Refer to your product packaging or the official WEN webspletno mesto za najnovejše kontaktne podatke.