Feit Electric S10.5TFL/850/MOT/BZ LED Security Flood Light User Manual

Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of your Feit Electric S10.5TFL/850/MOT/BZ LED Security Flood Light. This outdoor flood light features a motion sensor and dusk-to-dawn functionality, offering efficient and reliable illumination for various outdoor spaces. Please read these instructions thoroughly before installation and use to ensure proper function and safety.

Slika: spredaj view of the Feit Electric S10.5TFL/850/MOT/BZ LED Security Flood Light, showcasing its three adjustable heads and integrated motion sensor.

Varnostne informacije

• OPOZORILO: Nevarnost električnega udara. Pred namestitvijo ali servisiranjem izklopite varovalko ali odklopnik.
• Ta izdelek mora v skladu z veljavnim kodeksom namestitve namestiti oseba, ki je seznanjena s konstrukcijo in delovanjem izdelka ter s temi nevarnostmi.
• Use only UL or ETL listed wire for connections.
• Do not install this fixture with wet hands or while standing on wet or damp površine.
• Prepričajte se, da so vse povezave varne in ustrezno izolirane.
• This fixture is designed for outdoor use and is wet location rated (IP65).

Vsebina paketa

Pred začetkom namestitve preverite, ali so prisotne vse komponente:

• 1 x Feit Electric S10.5TFL/850/MOT/BZ LED Security Flood Light
• Pritrdilni material (vijaki, matice, tesnilo)
• Navodila za uporabo

Nastavitev in namestitev

This flood light is designed for hardwired, flush mount installation on a wall. Ensure the mounting surface is stable and can support the fixture's weight.

Potrebna orodja (niso priložena):

• Izvijač
• Odstranjevalci žice
• Klešče
• Električni trak
• Zaščitna očala

Koraki namestitve:

1. Izklopite napajanje: Locate the circuit breaker controlling the outdoor lighting circuit and turn off the power. Verify power is off using a voltage tester.
2. Pripravite montažno površino: Prepričajte se, da je električna razdelilna omarica varno nameščena in dostopna.
3. Attach Mounting Back Plate: Secure the fixture's mounting back plate to the junction box using the provided screws. Ensure the gasket is properly seated between the back plate and the mounting surface for a weather-tight seal.
4. Žične povezave: Connect the fixture's wires to your household wiring. Match the wires:
   • Črna (v živo) do črne (v živo)
   • Bela (nevtralna) do bele (nevtralne)
   • Zeleni ali goli baker (ozemljitev) do zelenega ali golega bakra (ozemljitev)
   Use the provided wire nuts and secure connections with electrical tape.
5. Pritrdilni element: Carefully align the fixture with the mounting back plate and secure it with the remaining screws. Ensure no wires are pinched.
6. Seal (Optional but Recommended): Apply a bead of silicone caulk around the perimeter of the fixture where it meets the mounting surface to prevent water intrusion.
7. Obnovi moč: Ponovno vklopite napajanje na odklopniku.

Image: Illustration of the hands-free wiring and mounting back plate, demonstrating how the fixture attaches to the wall for installation.

Navodila za uporabo

Your Feit Electric LED Security Flood Light is equipped with both a motion sensor and dusk-to-dawn technology for automated operation.

Funkcionalnost od mraka do zore:

The integrated photocell sensor automatically detects ambient light levels. The light will remain off during daylight hours and activate its motion sensing capabilities only when it gets dark. This ensures energy efficiency by preventing the light from operating unnecessarily during the day.

Image: A visual comparison illustrating the effect of dusk-to-dawn functionality, showing the light off during the day and on at night.

Delovanje senzorja gibanja:

Once the dusk-to-dawn sensor detects darkness, the motion sensor becomes active. It detects movement within a 180-degree range and up to 60 feet away. Upon detecting motion, the flood light will illuminate to its full 5000 lumens. After a period of no detected motion, the light will automatically turn off or dim down to 500 lumens if configured for lower light levels.

Prilagajanje svetlobnih glav:

The three LED light heads are independently adjustable, allowing you to direct the light output up to 270 degrees of coverage. Loosen the adjustment screws on each head, position the light as desired, and then securely tighten the screws.

Vzdrževanje

The Feit Electric LED Security Flood Light is designed for low maintenance and durability, featuring rugged, weather-resistant aluminum housing and shatter-resistant polycarbonate lenses.

Čiščenje:

• Pred čiščenjem se prepričajte, da je napajanje izklopljeno.
• Obrišite napravo z mehko krpoamp krpo.
• Do not use abrasive cleaners or solvents, as these can damage the finish or lenses.

Pregled:

• Periodically inspect the fixture for any signs of damage to the housing or wiring.
• Check that the mounting remains secure.

Image: The flood light mounted on an exterior wall, demonstrating its robust construction and IP65 wet-location rating, capable of withstanding various weather conditions.

Odpravljanje težav

Specifikacije

Image: A detailed diagram outlining the key specifications of the flood light, such as dimensions, wattage, brightness, color temperature, and IP rating.

Garancija

The manufacturer states that there is no explicit warranty description provided for this product. Please refer to your retailer's return policy or contact Feit Electric directly for any warranty-related inquiries.

Podpora uporabnikom

For further assistance, technical support, or to inquire about replacement parts, please contact Feit Electric customer service.

You can also visit the official Feit Electric store for more information and products: Feit Electric Store