1. Uvod
Welcome to the user manual for your FLEXISPOT EN1 Electric Stand Up Desk. This document provides essential information for the safe and efficient use of your new adjustable desk. Please read all instructions carefully before assembly and operation.
Varnostna opozorila
- Ne prekoračite največje omejitve teže 176 lbs (80 kg).
- Keep fingers and other body parts clear of moving parts during operation to prevent injury.
- Ensure all cables are properly managed and secured to avoid entanglement or damage during height adjustments.
- Follow all assembly instructions carefully and use tools safely.
- Ta izdelek je namenjen odraslim osebam.
2. Vključene komponente
Before beginning assembly, verify that all parts listed below are present in your package. Refer to the installation video for visual identification of components.
- One-Piece Desktop (55 x 28 inches, Rustic Top)
- Desk Frame (Black)
- Lifting Columns (2 units)
- Noge za mizo (2 kosi)
- Prečni nosilec
- Supporting Plates (2 units)
- Motor with Keypad (4-memory presets)
- Prenosna palica
- Spenjanje
- Vtič
- Hooks (for headphones/accessories)
- Assembly Tools (Allen wrench, spanner)
- Navodila za uporabo
Opomba: The desktop and desk frame may ship and arrive separately.
Image: Packaging showing separate boxes for desktop and frame.
3. Navodila za montažo
Follow these steps to assemble your FLEXISPOT EN1 desk. A detailed installation video is provided below for visual guidance.
Video vodnik za namestitev
Video: FLEXISPOT Standing Desk Frame Installation Guide. This video demonstrates the step-by-step assembly process for the desk frame and motor components.
Montaža po korakih
- Insert Coupling into Motor: Carefully insert the coupling into the motor. Ensure it is oriented correctly as shown in the installation video (0:09 mark).
- Insert Motor and Right Column: Attach the motor assembly to the right lifting column. Secure it using the provided screws and Allen wrench (0:16 mark).
- Install Crossbeam: Align the three protrusions on the lifting column with the holes in the crossbeam and secure it with screws (0:25 mark).
- Install Support Plates: Attach the two support plates to the top of the lifting columns using the provided screws (0:35 mark).
- Namestitev nog za mizo: Secure the desk feet to the bottom of the lifting columns using the provided screws (0:40 mark).
- Adjust Crossbeam: Loosen the screws on the crossbeam, adjust the width to fit your desktop, and then tighten the screws securely (0:47 mark).
- Install Table Board: Place the desktop upside down on a soft, clean surface. Carefully position the assembled frame onto the desktop. Use a drill (prepared by customer) and the provided screws to attach the desktop to the frame (0:59 mark).
- Install Transmission Rod: Insert the transmission rod into the motor and the left lifting column, ensuring it connects properly (1:07 mark).
- Tighten Transmission Rod Nut: Use the spanner to tighten the nut on the transmission rod (1:19 mark).
- Namestite tipkovnico: Mount the control keypad to the underside of the desktop in a convenient location using screws (1:22 mark).
- Namestite kljuke: Attach the accessory hooks to the underside of the desktop as desired (1:25 mark).
- Povežite kable: Connect all necessary power and control cables as shown in the video (1:30 mark). Ensure connections are secure and cables are managed to prevent interference with movement.
Once assembly is complete, carefully flip the desk upright. Ensure it is stable before placing any items on it.
4. Navodila za uporabo
Your FLEXISPOT EN1 desk features smooth electric height adjustment and convenient memory presets for personalized comfort.
Nastavitev višine
- Dvignite mizo: Pritisnite in držite Gor (^) button on the control panel to raise the desk to your desired standing height.
- Spodnja miza: Pritisnite in držite Navpično (v) button on the control panel to lower the desk to your desired sitting height.
- The desk height can be adjusted smoothly and quietly between approximately 29.1 inches (sitting) and 46.7 inches (standing), including the 1-inch tabletop thickness.
Image: Programmable Control Panel with LED display and memory presets.
Prednastavitve pomnilnika
The control panel features four memory preset buttons (1, 2, 3, 4) to save and recall your preferred sitting and standing heights.
- Če želite shraniti prednastavitev: Nastavite mizo na želeno višino z gumboma gor/dol. Pritisnite M button (or similar memory set button, often labeled with an 'i' or 'f' followed by a number) once, then immediately press one of the number buttons (1, 2, 3, or 4) to save the current height to that preset. The display will confirm the setting.
- Če želite priklicati prednastavitev: Preprosto pritisnite ustrezno številčno tipko (1, 2, 3 ali 4). Miza se bo samodejno premaknila na shranjeno višino.
Konec izdelkaview Video
Video: Upgrade Your Space with FLEXISPOT One-Piece Desk. This video highlights the desk's features, including its quiet operation and seamless height transitions.
5. Vzdrževanje
Redno vzdrževanje zagotavlja dolgo življenjsko dobo in optimalno delovanje vaše mize.
- Čiščenje: Obrišite namizje in okvir z mehko krpoamp krpo. Izogibajte se abrazivnim čistilom ali močnim kemikalijam, ki bi lahko poškodovale površino.
- Upravljanje kablov: Periodically check that all cables are securely fastened and not interfering with the desk's movement.
- Zategnite pritrdilne elemente: Over time, some fasteners may loosen. Periodically check and tighten all screws and bolts to maintain stability.
- Omejitev teže: Always adhere to the 176 lbs (80 kg) weight limit to prevent damage to the motor and frame.
6. Odpravljanje težav
If you encounter any issues with your desk, refer to the following common troubleshooting tips:
- Miza se ne premika:
- Ensure the power cable is securely plugged into both the desk and a working wall outlet.
- Check for any obstructions under or around the desk that might be preventing movement.
- Perform a reset: Unplug the desk for 10 seconds, then plug it back in. Press and hold the 'Down' button until the desk reaches its lowest point and slightly rises, indicating a successful reset.
- Neenakomerno gibanje:
- Preverite, ali je miza postavljena na ravno površino.
- Check that all assembly screws, especially those on the crossbeam and lifting columns, are securely tightened.
- Kode napak:
- If an error code appears on the display, refer to the full troubleshooting guide on the FLEXISPOT webspletno mesto ali se obrnite na podporo strankam.
For persistent issues, please contact FLEXISPOT customer support.
7. Specifikacije
| Znamka | FLEXISPOT |
| Model | EN1 |
| Dimenzije namizja | 55"Š x 28"G |
| Debelina namizja | 1 palcev |
| Height Adjustment Range (without tabletop) | 28.1" - 45.7" |
| Height Adjustment Range (with 1" tabletop) | 29.1" - 46.7" |
| Največja nosilnost | 176 lbs (80 kg) |
| Raven hrupa motorja | Pod 50 dB |
| Prednastavitve pomnilnika | 4 |
| Material okvirja | Industrijsko legirano jeklo |
| Material za namizni računalnik | Konstruiran les |
| Zahtevana montaža | Da (priporočena 1 oseba) |
| Vključene komponente | Desktop, Frame, Motor with Keypad, Assembly Tools |
| UPC | 810072826220 |
Diagram dimenzij
Image: Visual representation of the desk's desktop size and adjustable frame height.
8. Informacije o garanciji
Your FLEXISPOT EN1 Electric Stand Up Desk comes with a Limited Warranty. For detailed information regarding warranty coverage, terms, and conditions, please refer to the warranty card included in your package or visit the official FLEXISPOT webmesto.
9. Podpora strankam
If you have any questions, require assistance with assembly, or need troubleshooting support, please do not hesitate to contact FLEXISPOT customer service.
- Spletna podpora: Visit the official FLEXISPOT website for FAQs, product guides, and contact forms.
- Podpora po e-pošti: Refer to your product packaging or the FLEXISPOT webspletnega mesta za ustrezen e-poštni naslov službe za stranke.
- Telefonska podpora: Contact numbers can typically be found on the FLEXISPOT webspletno mesto ali dokumentacijo vašega izdelka.
