Ansmann Energy Check LCD - Uporabniški priročnik za profesionalni tester baterij

Uvod

The Ansmann Energy Check LCD is a professional battery tester designed to quickly and accurately determine the energy content and voltage of various primary and rechargeable batteries. This compact and user-friendly device provides results within 2-3 seconds, displaying the actual energy content in 10% steps and the cell voltage v voltih (V).

Figure 1: Ansmann Energy Check LCD Battery Tester. This image shows the overall design of the battery tester, including the LCD display and the various slots for different battery types.

Nastavitev

Vsebina paketa

Before using your Ansmann Energy Check LCD, ensure all components are present:

• Ansmann Energy Check LCD Battery Tester
• 1 x 9V Battery (for powering the tester)

Inserting the 9V Battery

The Ansmann Energy Check LCD is powered by a 9V battery. To install or replace the battery:

1. Locate the battery compartment on the back or side of the tester.
2. Odprite pokrov prostora za baterije.
3. Vstavite 9V baterijo in pazite na pravilno polarnost (+ in -).
4. Trdno zaprite pokrov prostora za baterije.

Figure 2: Inserting the 9V battery into the tester. This image demonstrates the correct way to insert the 9V battery that powers the Ansmann Energy Check LCD.

Navodila za uporabo

Splošno delovanje

The Ansmann Energy Check LCD provides quick and easy battery testing. The device automatically detects the battery type and displays the energy content in 10% steps and the voltage in volts (V) within 2-3 seconds.

Figure 3: Fast Testing and Percentage Display. This image highlights the quick testing capability and the 10% step display of the battery's energy content.

Battery Type Identification and Testing Slots

The tester features multiple dedicated slots and a test probe for various battery types. Refer to the diagram below to identify the correct testing location for your battery.

Figure 4: Battery Type Testing Slots. This detailed diagram illustrates where each specific battery type should be placed or connected for accurate testing.

Postopek testiranja

Za testiranje baterije:

1. Identify the correct slot or contact points for your battery type using Figure 4.
2. Prepričajte se, da so priključki akumulatorja čisti in brez umazanije.
3. Place the battery firmly into the designated slot or press it against the contact points, observing correct polarity (+ and -). For batteries requiring the test probe, connect the probe to the battery's positive terminal and the negative terminal to the corresponding contact on the tester.
4. The LCD display will show the battery's energy content in percentage and its voltage.

Figure 5: Testing a Button Cell Battery. This image shows a user testing a small button cell battery by pressing it onto the designated contact points.

Figure 6: Testing an AA Battery with Probe. This image illustrates the use of the test probe for larger cylindrical batteries like AA or AAA.

Vzdrževanje

Čiščenje

To ensure accurate readings and prolong the life of your tester, keep it clean. Wipe the exterior with a soft, dry cloth. Periodically clean the metal contact surfaces with a cotton swab lightly dampened with rubbing alcohol to remove any residue that might affect conductivity.

Shranjevanje

Store the Ansmann Energy Check LCD in a cool, dry place away from direct sunlight and extreme temperatures. If the tester will not be used for an extended period, it is recommended to remove the 9V battery to prevent leakage.

Odpravljanje težav

• Tester se ne vklopi:

  Check if the 9V battery is correctly inserted with the proper polarity. Ensure the 9V battery itself has sufficient charge. Replace if necessary.
• Netočne ali nedosledne meritve:

  Ensure the battery being tested is making firm and clean contact with the tester's terminals. Clean the battery terminals and the tester's contact points if there is any visible dirt or corrosion. Ensure the battery is placed in the correct slot for its type.

• Display shows 'LO' or 'ERR':

  This may indicate a very low battery charge or an incompatible battery type. Verify the battery type is supported by the tester.

Specifikacije

Podprte vrste baterij

• 3V Lithium Button Cells: CR1025, CR1216, CR1220, CR1616, CR1620, CR1632, CR2016, CR2025, CR2032, CR2320, CR2330, CR2354, CR2430, CR2450, CR2477, CR3032
• 3V Lithium Photo Batteries: CR2, CR123(A)
• 1.5V Alkaline Button Cells: LR41, LR43, LR44, LR45, LR48, LR50, LR52, LR53, LR54, LR55, LR57, LR58, LR59, LR60, LR63, LR66, LR69
• 1.44V Zinc-Air Button Batteries: 10, 13, 675, 312
• 12V Alkaline Batteries: A23, A27
• 1.5V Alkaline Batteries: AAA, AA, C, D, 9V alkaline battery
• 1.2V NiMH/NiCd Batteries: AAA, AA, C, D
• 1.5V Lithium Batteries: AAA, AA
• 3.6V/3.7V Li-ion Batteries: 14500, 14650, 16340, 17500, 18500, 18650, 22650, 26650

Varnostne informacije

Please observe the following safety guidelines when handling batteries and using the Ansmann Energy Check LCD:

Figure 7: Battery Safety Icons. This image displays universal symbols for safe battery handling, including warnings against improper disposal, short-circuiting, heating, and disassembling batteries.

• Ne poskušajte testirati poškodovanih ali puščajočih baterij.
• Ne povzročajte kratkega stika na terminalih baterije.
• Ne mečite baterij v ogenj.
• Ne razstavljajte baterij.
• Baterije hranite izven dosega otrok.
• Baterije zavrzite v skladu z lokalnimi predpisi.

Garancija in podpora

For detailed warranty information, technical support, or service inquiries regarding your Ansmann Energy Check LCD, please visit the official Ansmann webspletno mesto ali se obrnite na njihovo službo za pomoč strankam. Račun shranite kot dokazilo o nakupu za uveljavljanje garancije.

Več informacij najdete na Ansmann Store on Amazon.