1. Uvod
This manual provides essential information for the safe installation, operation, and maintenance of your Philips LED Slim Flood Light, model PTF150-NW-G1-Y-FL-8-BZ. Please read this manual thoroughly before installation and retain it for future reference.
The Philips LED Slim Flood Light is designed for outdoor applications such as sign lighting, building facades, security lighting, and general area illumination. Its robust construction and efficient LED technology ensure reliable performance.
2. Varnostne informacije
WARNING: Risk of electric shock. Installation should be performed by a qualified electrician or trained personnel in accordance with all applicable electrical codes.
- Pred namestitvijo ali servisiranjem izklopite napajanje na odklopniku ali v omarici z varovalkami.
- Zagotovite dovodni voltage is compatible with the fixture's requirements (120V AC).
- Naprave ne uporabljajte s poškodovano ožičenjem ali komponentami.
- Izogibajte se neposredni izpostavljenosti oči viru svetlobe, ko je osvetljeno.
- The fixture's housing acts as a heat sink and may become hot during operation. Allow adequate cooling time before handling.
- Ensure all connections are secure and properly sealed, especially the IP66 liquid-tight connector for the power cord, to maintain water resistance.
- Ne spreminjajte svetilke. Kakršne koli spremembe lahko razveljavijo garancijo in povzročijo varnostne nevarnosti.
3. Vsebina paketa
Pred začetkom namestitve preverite, ali so prisotne vse komponente:
- Philips LED Slim Flood Light (1 unit)
- Integrated Yoke Mount (pre-attached)
- Power Cord (3-foot, STW 16 gauge)
- IP66 Liquid Tight Connector (pre-attached to cord exit)
Slika 1: Philips LED Slim Flood Light. This image shows the front view of the flood light with its integrated yoke mount and power cord connection point.
4. Specifikacije
| Specifikacija | Podrobnost |
|---|---|
| Številka modela | PTF150-NW-G1-Y-FL-8-BZ |
| Znamka | Signify (Philips) |
| Wattage | 150 vatov |
| Lumnski izhod | 18600 lumnov |
| Barvna temperatura | 4000K hladno bela |
| Učinkovitost | 124 lumnov na vat |
| voltage | 120 voltov (AC) |
| Vrsta namestitve | Yoke Mount (Surface Mount) |
| Končaj | bron |
| Material | Die-cast aluminum housing, tempered glass lens |
| Ocena zaščite pred vdorom (IP). | IP65 (fixture), IP66 (connector) |
| Teža predmeta | 4 funta |
| Mere (pribl.) | 16.93" H x 11.41" W x 2.36" D (430mm H x 289.8mm W x 59.9mm D) |
5. Nastavitev in namestitev
The Philips LED Slim Flood Light is designed for surface mounting using its integrated yoke. Follow these steps for proper installation:
- Priprava: Ensure power is disconnected at the main circuit breaker. Gather necessary tools (drill, screwdriver, wire strippers, electrical tape, mounting hardware suitable for your surface).
- Lokacija namestitve: Select a sturdy surface (wall, pole, ground) capable of supporting the fixture's weight and providing adequate clearance for light distribution.
- Označevanje in vrtanje: Use the yoke mount as a template to mark the drilling points on the mounting surface. Drill appropriate pilot holes for your chosen mounting hardware. Refer to the dimension diagram for precise measurements.
- Zavarujte napeljavo: Attach the yoke mount securely to the prepared surface using appropriate screws or bolts (not included). Ensure the fixture is stable and cannot vibrate loose. The yoke includes a bolt to lock in the aiming angle after adjustment.
- Električna povezava:
- The fixture comes with a 3-foot watertight STW 16 gauge cord exiting the housing via an IP66 liquid-tight connector.
- Connect the fixture's power cord to your main power supply wiring. This connection must be made by a qualified electrician and comply with all local and national electrical codes.
- Ensure all wire connections are properly insulated and protected from moisture.
- Aiming Adjustment: Loosen the bolt on the yoke mount, adjust the flood light to the desired aiming angle, and then securely tighten the bolt to lock the position.
- Obnovi moč: Ko je namestitev končana in so vse povezave varne, ponovno vzpostavite napajanje na odklopniku.
Slika 2: Philips LED Slim Flood Light Dimension Diagram. This diagram provides detailed measurements for the flood light, including height, width, depth, and mounting hole spacing, crucial for accurate installation.
6. Navodila za uporabo
The Philips LED Slim Flood Light operates upon receiving power. There are no user-adjustable controls on the fixture itself.
- Vklop/izklop: Control the light by switching the connected power circuit on or off. This can be done via a wall switch, timer, or photocell (not included).
- Samodejno delovanje: For automated operation, connect the flood light to an external timer, motion sensor, or photocell switch (purchased separately) according to their respective installation instructions.
7. Vzdrževanje
The Philips LED Slim Flood Light is designed for minimal maintenance. Regular inspection and cleaning will ensure optimal performance and longevity.
- Čiščenje: Lečo in ohišje občasno očistite z mehko krpoamp cloth to remove dirt, dust, and debris. Do not use abrasive cleaners or solvents, as these can damage the finish or lens. Ensure power is off before cleaning.
- Pregled: Annually inspect the fixture for any signs of damage, loose connections, or wear on the power cord. Address any issues promptly.
- Zamenjava komponente: The LED light source is integrated and not user-replaceable. If the fixture malfunctions, contact customer support.
8. Odpravljanje težav
If your Philips LED Slim Flood Light is not functioning as expected, refer to the following common issues and solutions:
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Luč se ne vklopi. | Brez napajanja na napeljavo. Ohlapna žična povezava. Faulty circuit breaker/fuse. | Preverite napajanje. Preverite, ali so vse žične povezave varne (posvetujte se z usposobljenim električarjem). Ponastavite odklopnik ali zamenjajte varovalko. |
| Luč utripa ali je šibka. | Inconsistent power supply. Ohlapna napeljava. Poškodba pritrdilnega elementa. | Ensure stable power. Preverite ožičenje. If damage is suspected, discontinue use and contact support. |
| Voda v notranjosti napeljave. | Nepravilno zatesnjene povezave. Poškodovano ohišje/leča. | Immediately disconnect power. Inspect and re-seal all connections, especially the IP66 connector. If housing or lens is damaged, the IP rating may be compromised; contact support. |
Če koraki za odpravljanje težav ne odpravijo težave, se obrnite na podporo strankam.
9. Garancija in podpora
For warranty information and technical support, please refer to the official Signify (Philips) webspletno mesto ali se obrnite na njihovo službo za pomoč strankam. Shranite račun kot dokazilo o nakupu.
Proizvajalec: Označite
Številka modela: PTF150-NW-G1-Y-FL-8-BZ
Kontaktni podatki: Please visit the official Signify webspletno mesto za najnovejše kontaktne podatke in vire za podporo.
