Klarstein Monumenta Extractor Hood User Manual

1. Pomembne varnostne informacije

Please read this manual carefully before installing and operating your Klarstein Monumenta extractor hood. Keep these instructions for future reference.

• Prepričajte se, da je napajalnik voltage se ujema s podatki na napisni ploščici na napravi.
• Otrokom ne dovolite, da upravljajo napravo.
• Pred čiščenjem ali vzdrževanjem napravo vedno izključite iz električnega omrežja.
• Ne flambirajte pod kuhinjsko napo.
• Zagotovite ustrezno prezračevanje prostora, ko kuhinjsko napo uporabljate hkrati s plinskimi ali drugimi napravami na gorivo.
• Odpadnega zraka ne smete odvajati v dimnik, ki se uporablja za odvod dimnih plinov iz naprav, ki uporabljajo plin ali druga goriva.
• Redno čiščenje maščobnega filtra je bistvenega pomena za preprečevanje nevarnosti požara.

2. Izdelek je končanview

The Klarstein Monumenta is a wall-mounted extractor hood designed to efficiently remove cooking fumes and odors from your kitchen. It features a sleek stainless steel design, LED lighting, and a 5-button control panel.

Figure 1: Klarstein Monumenta extractor hood in a kitchen environment.

The hood can operate in two modes:

• Način izpušnega zraka: Fumes are extracted and discharged outside through a ventilation duct.
• Recirculating Air Mode: Fumes are filtered through activated charcoal filters and the purified air is returned to the kitchen.

3. Nastavitev in namestitev

This section provides general guidance for installing your extractor hood. For detailed steps, refer to the included multilingual user manual and consult a qualified installer if necessary.

3.1 Razpakiranje in komponente

Carefully unpack the appliance and check for any damage. Ensure all components are present:

• 1 x Kuhinjska napa
• 1 x Grease Filter (pre-installed or separate)
• 2 x Activated Carbon Filters (for recirculation mode)
• Pritrdilni material (vijaki, stenski vložki, nosilci)
• Večjezični uporabniški priročnik

Figure 2: Components including grease filter and activated carbon filters.

3.2 Montaža nape

The Klarstein Monumenta is a wall-mounted canopy hood. Ensure the wall is strong enough to support the weight of the hood (approx. 12.5 kg / 27.5 lbs). Maintain the recommended distance between the cooking surface and the bottom of the hood as specified in local building codes and the detailed manual.

• Mark drilling points on the wall according to the provided template.
• Izvrtajte luknje in vstavite stenske vložke.
• Pritrdite montažni(-e) nosilec(-e) na steno.
• Carefully lift and attach the hood to the bracket(s).
• Connect the exhaust ducting (for exhaust air mode) or install activated carbon filters (for recirculation mode).
• Priključite napajalnik.

Slika 3: Dimenzije izdelka za načrtovanje namestitve.

4. Navodila za uporabo

The Klarstein Monumenta extractor hood features a user-friendly 5-button control panel located on the front.

Figure 4: Control panel and LED lighting.

4.1 Funkcije nadzorne plošče

Nadzorna plošča običajno vključuje gumbe za:

• VKLOP/IZKLOP: Za vklop ali izklop nape.
• Izbira hitrosti ventilatorja: Three distinct power levels (1, 2, 3) are available to adjust the extraction rate according to your cooking needs.
• VKLOP/IZKLOP luči: To control the integrated LED lighting (2 x 1.5 watts) for illuminating your cooking area.

It is recommended to switch on the extractor hood a few minutes before you start cooking and leave it running for a few minutes after you finish to ensure all fumes and odors are effectively removed.

5. Vzdrževanje

Regular maintenance ensures optimal performance and extends the lifespan of your extractor hood. Always disconnect the power supply before performing any maintenance.

5.1 Cleaning the Grease Filter

The aluminum grease filter should be cleaned regularly (approximately every 2-4 weeks, depending on usage) to prevent grease buildup and maintain extraction efficiency. The central front flap can be opened for easy access.

• Remove the grease filter by releasing its latches.
• Wash the filter by hand in hot soapy water or in a dishwasher using a mild detergent.
• Pred ponovno namestitvijo se prepričajte, da je filter popolnoma suh.

5.2 Replacing Activated Carbon Filters (Recirculation Mode)

If your hood is operating in recirculation mode, the activated carbon filters need to be replaced periodically (typically every 3-6 months, depending on usage) as they cannot be washed. Used filters lose their odor-absorbing capacity.

• Remove the grease filter to access the activated carbon filters.
• Za odstranitev starih ogljikovih filtrov jih zavrtite ali odpnite.
• Install new activated carbon filters, ensuring they are securely in place.
• Matching replacement activated charcoal filters are available under item number 10030727.

5.3 Čiščenje zunanjosti

Clean the stainless steel exterior with a soft cloth and a non-abrasive cleaner specifically designed for stainless steel. Avoid harsh chemicals or abrasive pads that could scratch the surface.

6. Odpravljanje težav

If you encounter issues with your extractor hood, refer to the following common troubleshooting steps:

Če težava po poskusu teh rešitev vztraja, se obrnite na podporo strankam Klarstein.

7. Specifikacije

8. Garancija in podpora

For warranty information, technical support, or service requests, please refer to the warranty card included with your product or contact Klarstein customer service directly. Ensure you have your model number (10039395) and purchase details available when contacting support.

Additional resources, including FAQs and further product documentation, may be available on the official Klarstein webmesto.