Navodila za uporabo video stativa SmallRig AD-01

1. Izdelek je končanview

The SmallRig AD-01 Video Tripod is a heavy-duty, professional aluminum double-tube tripod designed for DSLR cameras, camcorders, and other camera equipment. It features a 360-degree fluid head, a dual-mode quick-release plate, and adjustable height for versatile shooting scenarios. This manual provides essential information for the proper setup, operation, and maintenance of your AD-01 Video Tripod.

Figure 1.1: SmallRig AD-01 Video Tripod with included carrying bag.

2. Komponente in vsebina paketa

Pred sestavljanjem preverite, ali so v paketu prisotne vse spodaj navedene komponente:

• 1 x Heavy-duty Fluid Head Tripod
• 1 x torba za prenašanje
• 1 x Quick Release Plate (for MFT)
• 1 x 1/4''-20 Screw
• 1 x 3/8''-16 Screw
• 1 x uporabniški priročnik

Slika 2.1: Vsi elementi, vključeni v paket izdelka.

Key parts of the tripod include:

• Fluid Head
• High Strength Aluminum Legs
• Flip Locking System
• Nedrseče gumijaste nogice
• Aluminum Alloy Central Stabilization System
• Tripod Locking Block

Slika 2.2: Podrobno view of the tripod's main components.

3. Navodila za nastavitev

3.1 Attaching the Fluid Head

The fluid head comes pre-attached to the tripod legs. Ensure it is securely fastened before use.

3.2 Nastavitev višine stojala

To adjust the height of the tripod legs, open the flip locking system on each leg section. Extend the legs to the desired height and firmly close the flip locks to secure them. The tripod can be adjusted from 85cm (33 inches) to 186cm (73 inches).

Figure 3.1: The tripod's adjustable height range and flip locking system.

3.3 Namestitev kamere

The fluid head features a dual-mode quick-release plate system. The included quick-release plate is compatible with MFT (Micro Four Thirds) systems and can be installed in both directions. For DJI RS 2/RS3/RS3 Pro compatibility, a separate quick-release plate (not included) is required.

1. Locate the quick-release plate on the fluid head.
2. Press the side quick release button to unlock and remove the plate.
3. Attach your camera to the quick-release plate using the appropriate 1/4''-20 or 3/8''-16 screw. Ensure the camera is securely fastened.
4. Slide the quick-release plate with the camera back into the fluid head until it clicks into place. Use the quick release plate fixing knob for additional security.

Figure 3.2: Fluid head controls including quick release mechanism and adjustment knobs.

Figure 3.3: Quick disassembly and mode switching of the quick release plate.

Figure 3.4: Quick release plate compatibility and built-in Allen wrench.

4. Navodila za uporabo

4.1 Fluid Head Movement

The professional fluid head features a built-in damping and balancing system for smooth camera movements. It supports 360° horizontal panning and +90°/-60° vertical tilting. Use the horizontal adjustment knob and vertical adjustment knob to control the resistance and lock the head in position.

Figure 4.1: Demonstrating the 360-degree panning and tilt range of the fluid head.

4.2 Leveling the Tripod

The fluid head includes a built-in bubble level to assist in achieving a perfectly level setup. Adjust the tripod legs until the bubble is centered within the indicator.

4.3 Nosilnost

The SmallRig AD-01 Video Tripod is designed to support a maximum load of 8KG (17LBS), providing stable support for various camera setups.

5. Vzdrževanje

To ensure the longevity and optimal performance of your SmallRig AD-01 Video Tripod, follow these maintenance guidelines:

• Čiščenje: Po vsaki uporabi obrišite stojalo z mehko, suho krpo, da odstranite prah in umazanijo. Za trdovratno umazanijo uporabite rahloamp krpo in nato temeljito posušite. Izogibajte se agresivnim kemikalijam ali abrazivnim čistilom.
• Mazanje: The fluid head is designed for smooth operation and typically does not require user lubrication. If you notice any stiffness, consult SmallRig support.
• Shranjevanje: Store the tripod in its carrying bag in a cool, dry place away from direct sunlight and extreme temperatures. Ensure all locks are disengaged before storage to prevent stress on the mechanisms.
• Pregled: Periodically check all screws, knobs, and leg locks for tightness. Tighten any loose components to maintain stability.

6. Odpravljanje težav

This section addresses common issues you might encounter with your SmallRig AD-01 Video Tripod.

6.1 Tripod Instability

• Težava: Tripod feels wobbly or unstable.
• rešitev: Ensure all leg sections are fully extended and their flip locks are securely closed. Verify that the tripod is placed on a flat, stable surface. Check the tightness of the central stabilization system.

6.2 Stiff Fluid Head Movement

• Težava: Panning or tilting movements are not smooth.
• rešitev: Ensure the horizontal and vertical adjustment knobs are not overtightened. Loosen them slightly to achieve desired fluidity. If the issue persists, ensure no debris is obstructing the head's movement.

6.3 Quick Release Plate Not Securing

• Težava: The quick release plate does not lock into the fluid head.
• rešitev: Ensure the side quick release button is fully depressed when inserting the plate. Make sure the plate is inserted in the correct orientation. Check for any obstructions or damage to the plate or the head's receiver.

7. Specifikacije

8. Garancija in podpora

Za podrobne informacije o garanciji glejte garancijski list, ki je priložen izdelku, ali obiščite uradno spletno stran SmallRig. website. SmallRig offers protection plans for extended coverage, which can be purchased separately.

If you encounter any issues or require technical assistance, please contact SmallRig customer support through their official channels. Provide your product model number (3751-SS) and a detailed description of the issue for faster service.