Paulmann 93096

Paulmann 93096 Calla LED Recessed Spotlights Kit (3-Pack) - Instruction Manual

Model: 93096

Uvod

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Paulmann 93096 Calla LED Recessed Spotlights Kit. This kit includes three versatile, matte black LED spotlights designed for various indoor environments, including damp rooms, thanks to their IP65 splash protection. Key features include the White Switch function for adjustable color temperature and an integrated memory function.

Please read these instructions carefully before installation and use to ensure safe and optimal performance of your Paulmann Calla LED spotlights. Keep this manual for future reference.

Paulmann 93096 Calla LED Recessed Spotlights Kit packaging and a single spotlight

Image: Paulmann 93096 Calla LED Recessed Spotlights Kit, showing the product packaging and a single spotlight unit.

1. Nastavitev in namestitev

Before beginning installation, ensure the main power supply is switched off at the circuit breaker to prevent electrical shock. Installation should be performed by a qualified electrician if you are unsure.

1.1 Zahtevana orodja (niso priložena)

  • Hole saw (68 mm diameter)
  • Izvijač
  • Odstranjevalci žice
  • voltage tester

1.2 koraki namestitve

  1. Priprava luknje za montažo: Using a 68 mm diameter hole saw, cut a circular opening in the ceiling or mounting surface. Ensure the cavity depth is at least 40 mm, with an installation depth of 55 mm required for the fixture.
  2. Installation diagram for Paulmann Calla LED spotlight showing dimensions

    Image: Detailed installation diagram illustrating the required hole diameter (68mm), fixture diameter (90mm), minimum cavity depth (40mm), and total installation depth (55mm).

  3. Električna povezava: Open the connection box attached to each spotlight. Connect the main power supply wires (Live 'L' and Neutral 'N') to the corresponding terminals within the connection box. Ensure all connections are secure.
  4. Close-up of the Paulmann LED spotlight connection box with L and N terminals

    Slika: Bližnji posnetek view of the electrical connection box, showing the 'L' (Live) and 'N' (Neutral) terminals for wiring.

  5. Zavarujte središče pozornosti: Fold back the spring clips on the sides of the spotlight fixture. Insert the spotlight into the prepared hole. The spring clips will automatically secure the fixture in place against the ceiling.
  6. Three Paulmann Calla LED spotlights with their connection boxes

    Image: A set of three Paulmann Calla LED spotlights, each connected to its individual wiring box, ready for installation.

  7. Repeat for all spotlights: Follow these steps for each of the three spotlights in the kit.
  8. Obnovi moč: Once all spotlights are securely installed and wired, restore power at the circuit breaker.

Important: Ensure proper IP65 rating is maintained, especially in damp environments like bathrooms. The IP65 rating protects against dust ingress and low-pressure water jets from any direction.

Bathroom diagram showing different IP protection zones for lighting

Image: Diagram illustrating various IP protection zones within a bathroom, indicating where IP65 and IP67 rated fixtures are suitable. The Paulmann Calla spotlights are IP65 rated.

2. Navodila za uporabo

2.1 White Switch Function (Color Temperature Adjustment)

The Paulmann Calla spotlights feature a "White Switch" function, allowing you to cycle through different color temperatures using your standard wall light switch.

  • To Change Color Temperature: Turn the light switch OFF and then immediately ON again. Each quick toggle will cycle the spotlight through the available color temperatures:
    • Warm White (3000K) - For a relaxing atmosphere.
    • Neutral White (4000K) - For general illumination and tasks.
    • Daylight White (6500K) - For bright, invigorating light.
  • Funkcija pomnilnika: The integrated memory function will save the last selected color temperature if the light remains ON for more than 5 seconds. The next time you turn the light on, it will recall the previously set color.
Three Paulmann Calla LED spotlights showing different color temperatures: warm white, neutral white, and daylight white

Image: Illustration of the White Switch function, displaying the three distinct color temperatures (Warm White, Neutral White, Daylight White) available from the spotlights.

Three Paulmann Calla LED spotlights with a visual representation of color temperature zones

Image: A visual representation of the color temperature zones within the spotlight, indicating the transition between warm and cool light.

2.2 Adjusting Spotlight Angle

The Calla spotlights are orientable, allowing you to direct the light beam precisely where needed. Gently tilt the inner light module to adjust the angle of illumination.

Close-up of a single Paulmann Calla LED spotlight showing its adjustable angle

Image: Close-up of a single Paulmann Calla LED spotlight, demonstrating its ability to be angled to direct light.

3. Vzdrževanje

  • Čiščenje: To clean the spotlights, ensure the power is off. Use a soft, dry, or slightly damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or electrical components.
  • Življenjska doba LED: The integrated LED light sources are designed for a long operational life. The LEDs are not replaceable. If an LED fails, the entire fixture must be replaced.
  • Pregled: Periodically inspect the spotlights for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician.

4. Odpravljanje težav

TežavaMožen vzrokrešitev
Spotlight does not illuminate.Ni napajanja; ohlapna ožičenje; okvarjena napeljava.Check circuit breaker. Verify wiring connections in the junction box. If problem persists, contact support.
White Switch function not working.Switching too slowly; memory function active.Ensure quick OFF/ON toggles. If a color was set for >5 seconds, it will be recalled. Try multiple quick toggles.
Luč nepričakovano utripa ali se zatemni.Unstable power supply; loose connection; incompatible dimmer (if applicable).Check power supply stability. Verify all wiring connections. These spotlights are not explicitly stated as dimmable, avoid using with non-compatible dimmers.

5. Specifikacije

FunkcijaPodrobnost
ZnamkaPaulman
Številka modela93096
Mere izdelka (D x Š x V)9 x 9 x 5.5 cm
Teža480 g (for the kit)
Ocena zaščite pred vdorom (IP).IP65 (zaščita pred prahom, zaščita pred vodnimi curki)
Število reflektorjev3
SlogModerno
barvaMat črna
oblikaOkrogla
MaterialPlastika
voltage230 volta
Posebne uporabeHallway, Bathroom (damp območja)
Posebne lastnostiWhite Switch (adjustable color temperature), Orientable
Vrsta svetlobnega viraIntegrirana LED
Luminous Flux (per spotlight)550 lumnov
Power (per spotlight)5.5 Watts (Total 16.5 Watts for 3)
Incandescent Equivalent (per spotlight)48 vatov
Indeks barvnega upodabljanja (CRI)80
Razpon barvne temperature3000K (Warm White), 4000K (Neutral White), 6500K (Daylight White)
Razred energijske učinkovitostiF
Vrsta namestitveVgradna (stropna)
Potreben premer luknje68 mm
Najmanjša globina votline40 mm
Globina namestitve55 mm

6. Informacije o garanciji

Paulmann provides a 5-letna garancija on this product. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage resulting from improper installation, misuse, or unauthorized modifications.

Paulmann 5-year warranty logo on installation diagram

Image: The Paulmann 5-year warranty logo, as seen on the product's installation diagram.

7. Podpora in stik

For further assistance, technical support, or warranty claims, please contact Paulmann customer service. Refer to the official Paulmann webZa najnovejše kontaktne podatke obiščite spletno mesto ali embalažo izdelka.

Paulman Webspletno mesto: www.paulmann.com

Povezani dokumenti - 93096

Prejview Navodila za namestitev in varnost vgradnih LED svetilk Paulmann
Celovit vodnik za vgradne LED-svetilke Paulmann, ki zajema namestitev, varnostna navodila, možnost zamenjave komponent in informacije o energetski učinkovitosti. Vključuje številke izdelkov od 934.39 do 934.45.
Prejview Navodila za varnost in namestitev vgradne LED svetilke Paulmann 925.29/925.30
Podrobna varnostna navodila in navodila za montažo vgradnih LED-svetil Paulmann 925.29 in 925.30. Vključuje diagrame po korakih in bistvene informacije o električni priključitvi.
Prejview Navodila za namestitev zunanje stenske svetilke Paulmann 947.78 Kikolo
Celovit priročnik za namestitev zunanje stenske svetilke Paulmann 947.78 Kikolo. Vključuje varnostna navodila, korake za montažo, navodila za ožičenje in specifikacije izdelka za to zunanjo svetilko s stopnjo zaščite IP65.
Prejview Paulmann URail Track Spot Installation Guide - Model 976.13
Detailed installation instructions and safety information for the Paulmann URail track spot lighting system, model 976.13. Learn how to assemble and install your track lighting.
Prejview Paulmann Plug & Shine Floor Individual Spot IP67 Installation Guide
Comprehensive installation guide for the Paulmann Plug & Shine Floor Individual Spot IP67 LED luminaire, detailing mounting, electrical connections, component replaceability, and safety information.
Prejview Paulmann Plug & Shine Floor Mini Basic Set LED Recessed Floor Luminaire Installation Guide
Installation and operating instructions for the Paulmann Plug & Shine Floor Mini Basic Set LED recessed floor luminaire (Art.-Nr. 936.97, 936.98). Includes safety, installation steps, replaceability, and disposal information.