1. Uvod
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Prity K1 Optima Multi-fuel Wood Stove. Please read these instructions carefully before using the appliance to ensure proper function and to prevent potential hazards. This model is designed for heating residential premises using solid fuel such as wood or wood briquettes.
The Prity K1 Optima is a compact and efficient wood stove featuring a 2 mm thick steel sheet body and a 3-4 mm thick steel sheet top plate. Its combustion chamber is lined with refractory bricks for optimal heat retention and is equipped with heat-resistant ceramic glass. The stove includes a cast iron grate, wooden door handles, a front flap for air supply control, and an exhaust damper to regulate flame intensity. It comes in a matte black finish.
2. Varnostne informacije
OPOZORILO: Nepravilna namestitev, prilagajanje, spreminjanje, servisiranje ali vzdrževanje lahko povzroči poškodbe ali materialno škodo. Pred namestitvijo ali servisiranjem te opreme natančno preberite navodila za namestitev, uporabo in vzdrževanje.
- Always ensure adequate ventilation when the stove is in operation to prevent carbon monoxide buildup.
- Only use recommended fuel types (dry wood or wood briquettes). Do not burn trash, plastics, or treated wood, as this can release toxic fumes and damage the stove.
- Maintain minimum clearances from combustible materials as specified below:
- Zadaj: 400 mm
- Left and Right Sides: 400 mm
- Zgornja meja: 600 mm
- Front (in the entire radiation area of the glass): 800 mm
- nadstropje: 0 mm (if non-combustible)
- Ensure the stove is installed on a stable, non-combustible surface.
- Regularly inspect and clean the chimney and flue pipe to prevent creosote buildup and chimney fires.
- Otroke in hišne ljubljenčke držite stran od vročih površin peči.
- Nikoli ne puščajte goreče peči brez nadzora.
- V bližini peči ne shranjujte vnetljivih materialov.
3. Izdelek je končanview
Ključne komponente:
- zgorevalna komora: Lined with refractory bricks for efficient heat storage and transfer.
- Ceramic Glass Door: Heat-resistant glass allowing view ognja.
- Cast Iron Grate: Supports fuel and allows ash to fall into the ash pan.
- Pepelnik: Zbira pepel za enostavno odstranjevanje.
- Air Supply Control (Front Flap): Regulates the amount of primary air entering the combustion chamber.
- Izpuh Damphm: Controls the intensity of the flame and flue gas flow.
- Flue Pipe Connection: Located at the top for connecting to a chimney system.
4. Nastavitev in namestitev
Installation of the Prity K1 Optima wood stove should be performed by a qualified professional in accordance with local building codes and regulations. Failure to do so may void your warranty and create a fire hazard.
Koraki namestitve:
- Izbira lokacije: Choose a location that adheres to the minimum clearances from combustible materials (refer to Section 2). The floor beneath the stove must be non-combustible or adequately protected.
- Priključek na dimnik: Connect the stove to a suitable chimney system using a Ø 130 mm flue pipe. Ensure all connections are sealed properly to prevent smoke leakage. The chimney must be in good condition and capable of providing adequate draft.
- Izravnavanje: Ensure the stove is level and stable on its intended surface.
- Začetni pregled: Before the first use, inspect the stove for any shipping damage or loose components. Ensure the door seals are intact and the air controls operate smoothly.
5. Navodila za uporabo
5.1. Vrsta goriva
The Prity K1 Optima is designed to burn dry wood or wood briquettes. Using unseasoned wood or other materials can lead to inefficient burning, creosote buildup, and potential damage to the stove or chimney.
5.2. First Burn (Curing)
During the first few burns, the paint on the stove will cure, emitting an odor and possibly some smoke. Ensure the area is well-ventilated. Start with small fires and gradually increase the heat over several days to allow the paint to cure properly. Avoid very hot fires during this period.
5.3. Prižiganje peči
- Open the front air supply flap completely.
- Place crumpled paper or firelighters on the cast iron grate.
- Place a small amount of kindling (small, dry wood pieces) on top of the paper/firelighters.
- Prižgite papir/prižigalce ognja.
- Once the kindling is burning well, add larger pieces of dry wood.
- Zaprite vrata zgorevalne komore.
5.4. Air Control and Flame Intensity
- Front Air Supply Flap: This controls the primary air for combustion. Opening it increases the burn rate and heat output, while closing it reduces them. For starting a fire, keep it fully open. Once the fire is established, adjust it to achieve the desired burn rate.
- Izpuh Damphm: This mechanism regulates the flow of flue gases and can be used to fine-tune the flame intensity. Adjust it carefully to optimize combustion and heat output.
5.5. Dolivanje goriva
When the fire dies down and only embers remain, carefully open the door, add more dry wood, and then close the door. Adjust the air controls as needed to re-establish the fire.
6. Vzdrževanje
Regular maintenance ensures the longevity and safe operation of your Prity K1 Optima wood stove.
6.1. Odstranjevanje pepela
Empty the ash pan regularly, ideally before each use or when it is full. Ensure the ashes are completely cold before disposing of them in a non-combustible container.
6.2. Cleaning the Ceramic Glass
Clean the ceramic glass when the stove is cold. Use a damp cloth and a non-abrasive glass cleaner specifically designed for wood stove glass. Avoid harsh chemicals or abrasive pads that can scratch the glass.
6.3. Chimney and Flue Pipe Cleaning
Have your chimney and flue pipe inspected and cleaned by a certified chimney sweep at least once a year, or more frequently if you burn the stove heavily. This prevents creosote buildup, which can lead to chimney fires.
6.4. Splošni pregled
Periodically check the door seals for wear and tear. Replace them if they are cracked or hardened to maintain airtightness and efficiency. Inspect all components for any signs of damage or corrosion.
7. Odpravljanje težav
Tukaj je nekaj pogostih težav in njihovih možnih rešitev:
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Dim prihaja v sobo | Poor chimney draft, blocked flue, door opened too quickly, wet wood. | Check for chimney blockages. Ensure flue is clear. Open door slowly. Use dry, seasoned wood. |
| Nizka toplotna moč | Insufficient air supply, wet wood, small fire. | Open air supply flap more. Use dry wood. Build a larger fire with appropriate fuel. |
| Prekomerna stopnja gorenja | Too much air supply, faulty door seal. | Close air supply flap partially. Check and replace door seals if necessary. |
| Steklo hitro potemni | Moker les, nezadostno čiščenje z zrakom, nizka temperatura gorenja. | Use dry wood. Ensure adequate air supply. Burn at a higher temperature for a period to clean the glass. |
8. Specifikacije
The following table details the technical specifications for the Prity K1 Optima Multi-fuel Wood Stove:
| Funkcija | Specifikacija |
|---|---|
| Znamka | Prity |
| Model | K1 Optima |
| Skupne dimenzije (Š x G x V) | 390 x 390 x 760 mm |
| Combustion Chamber Dimensions (W x D x H) | 310 x 320 x 460 mm |
| Teža | 60 kg |
| Nominal Heating Power | 8 kW |
| Učinkovitost | 75-80 % |
| Premer dimovodne cevi | Ø 130 mm |
| Heating Area (approx.) | 45.5 m² |
| Heating Capacity (approx.) | 123 m³ |
| Standardi | EN 13240:2001 in EN 13299:2001 |
| Material | Steel construction, refractory bricks, ceramic glass, cast iron |
| Vrsta goriva | Les |
| barva | Mat črna |
| Energijski razred | A (based on energy label for K1 series) |
9. Garancija in podpora
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. Spare parts availability information is currently unavailable through standard product specifications.
Kontakt proizvajalca:
Proizvajalec: Prity 95 LTD
For technical support or inquiries, please contact your authorized Prity dealer or the point of purchase.
