TM617 Digital Time Switch User Manual

1. Uvod

This user manual provides detailed instructions for the installation, operation, and maintenance of the SINOTIMER TM617 Digital Time Switch. The TM617 is a weekly programmable electronic timer designed for controlling electrical appliances with precision, offering a large LCD display for clear visibility.

Please read this manual thoroughly before using the device to ensure proper function and safety.

Slika 1: Spredaj view of the TM617 Digital Time Switch.

2. Varnostne informacije

• Pred namestitvijo ali vzdrževanjem se prepričajte, da je napajanje izklopljeno, da preprečite električni udar.
• This device should be installed by a qualified electrician in accordance with local electrical codes.
• Naprave ne izpostavljajte vlagi, ekstremnim temperaturam ali korozivnim okoljem.
• Do not disassemble or modify the device. Any unauthorized modifications will void the warranty.
• Preverite voltage rating of the device (110V/220V) matches your power supply before connection.

3. Značilnosti izdelka

• Large LCD display for clear and easy reading.
• Weekly programmable with up to 16 ON/OFF settings per day.
• Built-in rechargeable battery for memory backup when power is off.
• High accuracy and strong anti-interference capability.
• Funkcija ročnega preklapljanja.
• Suitable for controlling street lights, neon lights, advertising signs, production equipment, broadcast television, and other power loads.

4. Vsebina paketa

Po odprtju preverite vsebino paketa:

• 1 x SINOTIMER TM617 Digital Time Switch
• 1 x Uporabniški priročnik (ta dokument)
• Mounting Screws (if included with your specific model)

Figure 2: TM617 with protective cover open and mounting screws.

5. Nastavitev in namestitev

5.1 Montaža

The TM617 can be mounted on a wall or panel. Ensure a stable surface and adequate ventilation. Refer to the dimensional diagram for precise measurements.

Figure 3: TM617 Dimensional and Installation Diagram.

5.2 Shema ožičenja

Connect the power supply and load according to the wiring diagram provided on the device or in the detailed product specifications. Ensure all connections are secure and insulated. Incorrect wiring can damage the device or cause electrical hazards.

• Vhodna moč: Connect the 110V/220V AC power supply to the designated input terminals.
• Izhodna obremenitev: Connect the appliance or load to be controlled to the output terminals.

Note: The internal battery charges when the device is connected to power. Allow several hours for the battery to fully charge before initial programming if the device has been stored for a long period.

6. Navodila za uporabo

6.1 Funkcije gumbov

• P (Program): Vstopi v način programiranja ali izstopi iz njega.
• D+ (Day): Adjusts day of the week in setting mode; selects day in program mode.
• H+ (Hour): Adjusts hour in setting mode; selects hour in program mode.
• M+ (Minute): Adjusts minute in setting mode; selects minute in program mode.
• C/R (Cancel/Recall): Resets current setting; recalls programs.
• Clock Icon (Set Time): Press to enter time setting mode.
• Manual Override Button (Hand Icon): Toggles between ON/AUTO/OFF modes.

Figure 4: TM617 Buttons and Display.

6.2 Nastavitev trenutnega časa in dneva

1. Pritisnite in držite Ikona ure gumb.
2. Medtem ko držite Ikona ure, pritisnite D+ to set the current day of the week (MO, TU, WE, TH, FR, SA, SU).
3. Medtem ko držite Ikona ure, pritisnite H+ da nastavite trenutno uro.
4. Medtem ko držite Ikona ure, pritisnite M+ da nastavite trenutno minuto.
5. Spustite Ikona ure , da shranite nastavitve.

6.3 Programiranje ciklov VKLOP/IZKLOP

The TM617 supports up to 16 ON/OFF programs. Each program consists of an ON time and an OFF time.

1. Pritisnite P enkrat pritisnite gumb. Na zaslonu se bo prikazalo "1 ON".
2. Pritisnite D+ to select the day(s) for the first ON program (e.g., MO, TU, WE, TH, FR, SA, SU, or specific combinations).
3. Pritisnite H+ to set the hour for the first ON program.
4. Pritisnite M+ to set the minute for the first ON program.
5. Pritisnite P ponovno pritisnite gumb. Na zaslonu se bo prikazalo "1 IZKLOP".
6. Repeat steps 2-4 to set the day(s), hour, and minute for the first OFF program.
7. Nadaljujte s pritiskom P to cycle through "2 ON", "2 OFF", up to "16 ON", "16 OFF", setting each program as needed.
8. Ko nastavite vse želene programe, pritisnite Ikona ure gumb za izhod iz načina programiranja in vrnitev na prikaz trenutnega časa.

To clear a specific program, press C/R when that program is displayed in programming mode.

6.4 Ročna preglasitev

The manual override button (hand icon) allows you to temporarily or permanently change the output state without affecting programmed settings.

• Pritisnite Ročna preglasitev gumb za kroženje med načini:
• VKLOPLJENO: Output is continuously ON, ignoring programs.
• SAMODEJNO: Output follows programmed ON/OFF cycles.
• IZKLOPLJENO: Output is continuously OFF, ignoring programs.
• Izberite AUTO for normal operation based on your programmed schedule.

7. Vzdrževanje

• Napravo redno čistite z mehko, suho krpo. Ne uporabljajte abrazivnih čistil ali topil.
• Ensure the device is kept free from dust and debris to maintain proper ventilation.
• The internal battery is designed for long life and typically does not require replacement. If the display becomes dim or settings are lost frequently, the battery may need servicing by a qualified technician.

8. Odpravljanje težav

9. Specifikacije

10. Garancija in podpora

SINOTIMER products are manufactured to high quality standards. For warranty information, technical support, or service inquiries, please contact your original retailer or the SINOTIMER customer service department. Please have your product model number (TM617) and purchase date available when contacting support.

For the most up-to-date information, please visit the official SINOTIMER webspletno mesto ali glejte embalažo izdelka.