X-PRO Milan 50 50cc Moped User Manual

1. Uvod

This manual provides essential information for the safe and efficient operation, maintenance, and care of your X-PRO Milan 50 50cc Moped. Please read this manual thoroughly before operating the moped to ensure proper usage and to prevent damage or injury.

The X-PRO Milan 50 is equipped with a GY6 49.6cc, air-cooled, 4-stroke engine, designed for reliable performance and fuel efficiency. It features both electric starting and a back-up kick starter for convenience.

2. Postavitev in začetna montaža

Your X-PRO Milan 50 Moped is shipped in a factory package, which requires some assembly upon arrival. This section outlines the general steps for preparing your moped for first use.

Image: The X-PRO Milan 50 Moped as it appears inside its metal shipping crate, indicating the initial packaging condition.

Image: A visual comparison illustrating the components included in a 'Factory Package' (unassembled) versus a fully assembled X-PRO Moped.

2.1 Uncrating and Inspection

1. Carefully remove the outer packaging and metal crate. Ensure all components are present and undamaged.
2. Refer to the packing list to verify all parts are accounted for.

2.2 Koraki sestavljanja

1. Namestitev krmila: Attach the handlebars securely, ensuring all cables and wires are routed correctly and not pinched.
2. Pritrditev ogledala: Namestite zadnji delview mirrors onto the handlebars. Adjust them for optimal visibility.
3. Namestitev sprednjega kolesa: Securely attach the front wheel, ensuring the brake system is correctly aligned and functional.
4. Priključek baterije: Connect the battery terminals, ensuring correct polarity.
5. Preverjanje tekočin: Verify engine oil levels and brake fluid levels. Add fuel to the tank.

It is recommended to have a qualified technician perform the final inspection and adjustments before the first ride.

3. Navodila za uporabo

Familiarize yourself with the controls and features of your Milan 50 moped before riding.

Image: A full side view of the X-PRO Milan 50 50cc Moped, showcasing njegovo zasnovo in sestavne dele.

3.1 Zagon motorja

1. Ensure the moped is on its center stand.
2. Vstavite ključ v kontakt in ga obrnite v položaj 'ON'.
3. Električni zagon: Squeeze the left brake lever and press the electric start button.
4. Hitri začetek: If the electric start does not engage, use the kick starter lever located on the right side of the engine.

3.2 Seat Operation

The seat of the X-PRO Milan 50 has a specific mechanism for opening and closing. Refer to the video below for detailed instructions.

3.3 Riding the Moped

1. Vedno nosite primerno varnostno opremo, vključno s čelado.
2. Familiarize yourself with the throttle, brakes (front and rear), and turn signals.
3. Maintain a safe speed and distance from other vehicles.

4. Vzdrževanje

Regular maintenance is crucial for the longevity and safe operation of your X-PRO Milan 50 Moped.

4.1 Rutinski pregledi

• Motorno olje: Check engine oil level regularly and change according to the maintenance schedule.
• Tlak v pnevmatikah: Ensure tires are inflated to the recommended pressure for optimal handling and safety.
• Zavore: Inspect brake levers and pads for wear and proper function.
• Luči in signali: Verify all lights, including headlights, taillights, and turn signals, are working correctly.
• Zračni filter: Po potrebi očistite ali zamenjajte zračni filter, da ohranite delovanje motorja.

4.2 Air Cooling System

The moped features an air cooling system that helps maintain optimal engine temperatures. Ensure the cooling fins are kept clean and free from obstructions to allow for efficient heat dissipation.

5. Odpravljanje težav

This section provides solutions to common issues you might encounter with your X-PRO Milan 50 Moped.

5.1 Motor se ne zažene

• Preverite nivo goriva: Prepričajte se, da je v rezervoarju dovolj goriva.
• Ključ za vžig: Verify the ignition key is in the 'ON' position.
• Baterija: Check battery connections and charge level. A weak battery can prevent electric starting.
• Vžigalna svečka: Preverite, ali je svečka umazana ali poškodovana. Po potrebi jo očistite ali zamenjajte.
• Stikalo za ubijanje: Ensure the engine kill switch is in the 'RUN' position.

5.2 Loss of Power

• Zračni filter: A clogged air filter can restrict airflow and reduce engine power. Clean or replace.
• Sistem goriva: Check for fuel line obstructions or a dirty carburetor.
• Tlak v pnevmatikah: Underinflated tires can increase drag and reduce perceived power.

For complex issues, it is recommended to consult a certified mechanic.

6. Specifikacije

Detailed technical specifications for the X-PRO Milan 50 Moped.

Image: The X-PRO Milan 50 Moped displaying its overall length, width, and height dimensions.

7. Garancija in podpora

For information regarding the product warranty, please refer to the official warranty documentation provided with your purchase or contact X-PRO customer support directly. Warranty terms and conditions may vary.

For technical assistance, parts, or service inquiries, please contact the manufacturer or an authorized service center.