1. Uvod
This manual provides instructions for the installation, operation, and maintenance of your Sena Parani M10 Bluetooth Motorcycle Headset. The Parani M10 allows for seamless communication and entertainment while riding, featuring Bluetooth intercom capabilities and smartphone connectivity for music, GPS, and calls. Please read this manual thoroughly before using the device to ensure proper function and safety.
2. Vsebina paketa
The Parani M10 package typically includes the following components:
- Parani M10 Main Unit
- Žični mikrofon
- Speakers (pair)
- Čelada Clamp Komplet
- USB polnilni kabel
- Podloge za zvočnike
- Pritrdilni elementi z zanko za zvočnike
- Uporabniški priročnik (ta dokument)
Figure 2.1: Parani M10 complete kit showing the main unit, wired microphone, and speakers.
3. Izdelek je končanview
Familiarize yourself with the main unit's components and controls.
Figure 3.1: Parani M10 Main Unit Controls and Ports.
- Jog Dial: Used for volume control, menu navigation, and various functions.
- Večnamenski gumb: Primary button for power, pairing, and call management.
- LCD zaslon: Shows battery status, volume level, intercom pairing status, and other operational information.
- Vrata za polnjenje z enosmernim tokom in nadgradnjo vdelane programske opreme: For charging the device and updating its firmware.
- Zvočniki in vhod za mikrofon: Connection point for the wired speakers and microphone.
4. Nastavitev in namestitev
The Parani M10 is designed for easy installation on most motorcycle helmets.
4.1 Attaching the Main Unit to the Helmet
- Izberite primerno mesto na levi strani čelade za clamp komplet.
- Odvijte vijake na čeladiamp kit and slide it between the helmet shell and the inner padding. Ensure it is securely fastened.
- Slide the Parani M10 main unit onto the clamp dokler se ne zaskoči.
Figure 4.1: Parani M10 unit installed on a helmet.
4.2 Namestitev zvočnikov in mikrofona
- Attach the hook and loop fasteners to the inside of your helmet, aligning them with your ears.
- Press the speakers onto the fasteners. Ensure the speakers are positioned directly over your ears for optimal audio quality.
- Attach the wired boom microphone to the inside of the helmet, positioning it close to your mouth but not directly in front of it to avoid wind noise.
- Route the speaker and microphone wires neatly under the helmet padding to the main unit's port.
- Connect the speaker/microphone cable to the corresponding port on the Parani M10 main unit.
4.3 Polnjenje naprave
Before first use, fully charge the Parani M10. Connect the USB charging cable to the DC Power Charging Port on the main unit and to a USB power source. The LCD display will indicate charging status.
5. Navodila za uporabo
5.1 Vklop/izklop
- Vklop: Pritisnite in držite večfunkcijski gumb 1 sekundo.
- Ugasniti: Pritisnite in držite večnamenski gumb 5 sekundi.
5.2 Nadzor glasnosti
Rotate the Jog Dial clockwise to increase volume and counter-clockwise to decrease volume. The LCD display will show the current volume level.
Figure 5.1: LCD display showing pairing status and volume.
5.3 Združevanje pametnih telefonov
- With the M10 powered off, press and hold the Multi-function Button for 5 seconds until the LED flashes red and blue, indicating pairing mode.
- Na pametnem telefonu pojdite v nastavitve Bluetooth in poiščite nove naprave.
- Select "Parani M10" from the list of available devices.
- Once paired, the LED will flash blue, and the LCD will confirm connection.
- You can now listen to music, GPS navigation, and make/receive phone calls through your headset.
5.4 Interkom Bluetooth
The Parani M10 supports intercom communication with up to four other Parani users on its dedicated Bluetooth intercom network.
- Pairing Intercom:
- Ensure both M10 units are powered on.
- On one M10 unit, press and hold the Jog Dial for 5 seconds until the LED flashes red and blue.
- On the second M10 unit, press and hold the Jog Dial for 5 seconds until the LED flashes red and blue.
- The units will automatically search and pair. Once paired, the LED will flash blue.
- Repeat this process for additional units (up to four total).
- Starting/Ending Intercom Conversation:
- To start an intercom conversation, tap the Jog Dial.
- To end an intercom conversation, tap the Jog Dial again.
5.5 Telefonski klici
- Sprejmi klic: Tapnite večnamenski gumb.
- Končaj klic: Tapnite večnamenski gumb.
- Zavrni klic: Pritisnite in držite večnamenski gumb 2 sekundi.
- glasovno klicanje: In standby mode, press and hold the Multi-function Button for 3 seconds. (Requires smartphone support for voice commands).
6. Vzdrževanje
6.1 Čiščenje
Obrišite glavno enoto z mehko damp cloth. Do not use harsh chemicals or solvents. Ensure all ports are dry before charging or use.
6.2 Skrb za baterije
- Napravo redno polnite, tudi če je ne uporabljate, da ohranite zdravje baterije.
- Avoid storing the device in extreme temperatures.
- Do not attempt to replace the internal battery yourself. Contact Sena support for battery service.
6.3 Posodobitve vdelane programske opreme
Občasno preverite Seno website for firmware updates. Updating the firmware can improve performance and add new features. Connect the device to your computer using the USB cable and follow the instructions provided by Sena's Device Manager software.
7. Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Naprava se ne vklopi. | Nizka baterija. | Napravo popolnoma napolnite. |
| Seznanitev s pametnim telefonom ni mogoča. | Device not in pairing mode; smartphone Bluetooth off; interference. | Ensure M10 is in pairing mode (red/blue flashing LED). Turn smartphone Bluetooth off and on. Move away from other Bluetooth devices. |
| Domofon se ne povezuje. | Units not in intercom pairing mode; out of range; already connected to other devices. | Ensure both M10 units are in intercom pairing mode. Reduce distance between units. Disconnect from other Bluetooth devices before intercom pairing. |
| Iz zvočnikov ni zvoka. | Volume too low; speakers not connected properly; faulty speakers. | Increase volume using the Jog Dial. Check speaker connections. Test with another audio source if possible. |
| Mikrofon ne deluje. | Microphone not connected properly; faulty microphone. | Check microphone connection to the main unit. Ensure microphone is positioned correctly. |
7.1 Ponastavitev na tovarniške nastavitve
If issues persist, a factory reset may resolve them. To perform a factory reset, press and hold the Multi-function Button and the Jog Dial simultaneously for 10 seconds. The device will reset to its default settings.
8. Specifikacije
| Ime modela | Parani M10 |
| Različica Bluetooth | Bluetooth 5.1 |
| Domofon | Up to 1 km (0.6 miles) in open terrain |
| Max Intercom Users | 4 (Parani-only network) |
| Čas pogovora | Do 16 ur |
| Čas polnjenja | Približno 2.5 ur |
| Delovna temperatura | -10 °C do 55 °C (14 °F do 131 °F) |
| Teža | Pribl. 60 g (2.1 oz) |
Note: Specifications are subject to change without notice. Actual performance may vary based on environmental conditions and usage.
9. Garancija in podpora
9.1 Informacije o garanciji
Sena products are covered by a limited warranty from the date of purchase. For detailed warranty terms and conditions, please refer to the official Sena webspletno mesto ali garancijski list, ki je priložen izdelku. Dokazilo o nakupu shranite za uveljavljanje garancije.
9.2 Podpora strankam
Za tehnično pomoč, odpravljanje težav ali splošna vprašanja obiščite uradno spletno stran Sena. website for support resources, FAQs, and contact information. You can also reach out to your local dealer for assistance.
- Sena Webspletno mesto: www.sena.com
- Parani Webspletno mesto: www.parani.com
