Uvod
This manual provides detailed instructions for the installation, operation, and maintenance of your AXAGON ADSA-ST USB 3.0 Docking Station. This device is designed to connect 2.5" and 3.5" SATA SSDs and HDDs to your computer via a USB 3.0 interface, offering fast data transfer speeds.
Pred uporabo izdelka natančno preberite ta priročnik, da zagotovite pravilno delovanje in preprečite poškodbe.
Vsebina paketa
Preverite, ali so v paketu prisotne vse komponente:
- AXAGON ADSA-ST Docking Station
- USB 3.0 Type-A to Micro-B cable
- Napajalni adapter
- Uporabniški priročnik (ta dokument)
Image: The AXAGON ADSA-ST Docking Station shown alongside its retail packaging, illustrating the product and its box.
Ključne značilnosti
- Supports 2.5" and 3.5" SATA I/II/III SSDs and HDDs.
- USB 3.0 (USB 3.2 Gen 1) interface with up to 5 Gbps transfer speed.
- SATA 6G (SATA III) support.
- UASP (USB Attached SCSI Protocol) support for enhanced performance.
- TRIM support for SSDs.
- HDD Auto Spindown function.
- LED indication for power and activity.
- Compact design with aluminum body.
Slika: A view of the AXAGON ADSA-ST Docking Station highlighting its 5 Gbps USB 3.2 Gen 1 speed and compact size.
Image: The docking station from the front, indicating features like SMART HDD info, automatic HDD spindown, and USB-A connectivity.
Image: The underside of the docking station, showing internal components and highlighting SATA 6G, UASP, and TRIM support.
Navodila za namestitev
- Priključite napajalnik: Plug the included power adapter into the DC IN port on the back of the docking station and then into a power outlet.
- Povežite se z računalnikom: Connect the USB 3.0 cable from the docking station's Micro-B port to an available USB 3.0 (or higher) port on your computer.
- Insert HDD/SSD:
- For 2.5" SSD/HDD: Gently slide the 2.5" drive into the slot until it connects firmly with the SATA connector.
- For 3.5" HDD: Gently slide the 3.5" drive into the slot until it connects firmly with the SATA connector.
Ensure the drive is inserted correctly with the SATA connector facing the correct direction. Do not force the drive.
Image: A 2.5-inch SSD being inserted into the docking station, demonstrating compatibility with smaller drives.
Image: A 3.5-inch HDD being inserted into the docking station, demonstrating compatibility with larger drives.
- Vklop: Press the power button located on the back of the docking station. The LED indicator on the front will illuminate.
Image: The rear panel of the docking station, showing the power button, USB Micro-B port, and power input for connection.
Navodila za uporabo
Drive Recognition
Once powered on and connected, your operating system should automatically detect the inserted drive. If it's a new drive, you may need to initialize and format it through Disk Management (Windows) or Disk Utility (macOS) before it appears in File Raziskovalec/Iskalnik.
LED indikator
The LED indicator on the front of the docking station provides status information:
- Polno modra: Power on, drive idle.
- Utripajoča modra: Drive activity (reading or writing data).
Slika: Bližnji posnetek view of the docking station's front panel, highlighting the LED indicator light.
Removing a Drive
Before removing a drive, always safely eject it from your operating system to prevent data corruption. After ejection, gently pull the drive straight out of the docking station slot.
Samodejno upočasnjevanje trdega diska
The docking station supports automatic spindown of the HDD when it is idle for a certain period, conserving power and extending drive lifespan. This feature is managed by the operating system or the drive itself.
Vzdrževanje
- Polnilno postajo vzdržujte čisto in brez prahu. Za čiščenje uporabljajte mehko, suho krpo.
- Naprave ne izpostavljajte ekstremnim temperaturam, vlagi ali neposredni sončni svetlobi.
- Naprave ne poskušajte razstavljati ali popravljati sami. Obrnite se na usposobljeno servisno osebje.
- Ensure proper ventilation around the docking station during operation.
Odpravljanje težav
- Drive not detected:
- Prepričajte se, da je napajalnik varno priključen in da je priklopna postaja vklopljena.
- Verify the USB cable is properly connected to both the docking station and the computer.
- Poskusite druga vrata USB na vašem računalniku.
- Ensure the HDD/SSD is fully seated in the docking station's slot.
- Check Disk Management (Windows) or Disk Utility (macOS) to see if the drive is recognized but uninitialized/unformatted.
- Test with a different HDD/SSD to rule out a drive issue.
- Počasne hitrosti prenosa:
- Ensure the docking station is connected to a USB 3.0 (or higher) port on your computer. USB 2.0 ports will limit speeds.
- Preverite, ali sta vaš operacijski sistem in gonilniki posodobljeni.
- The actual speed depends on the drive's performance and your computer's USB controller.
- Drive disconnects randomly:
- Preverite vse kabelske povezave.
- Prepričajte se, da napajalnik zagotavlja stabilno napajanje.
- Disable USB power saving features in your computer's operating system settings.
Tehnične specifikacije
| Funkcija | Podrobnost |
|---|---|
| Znamka | AXAGON |
| Številka modela | ADSA-SN |
| Platforma strojne opreme | PC |
| Združljive naprave | Prenosni računalnik, namizni računalnik |
| Združljivost pogonov | 2.5" / 3.5" SATA I/II/III SSD/HDD |
| Vmesnik | USB 3.0 (USB 3.2 Gen 1) |
| Hitrost prenosa podatkov | Up to 5 Gbps (USB 3.0), 6 Gbps (SATA III) |
| Skupno število vrat USB | 1 (Micro-B) |
| Število ležišč za pogone | 1 |
| barva | Črna |
| Teža predmeta | 2.2 funta (približno 1 kg) |
| Dimenzije paketa | 3.94 x 0.79 x 0.39 palca (približno 10 x 2 x 1 cm) |
| Prvič na voljo | 30. marec 2021 |
Garancija in podpora
For warranty information and technical support, please refer to the official AXAGON webspletno mesto ali se obrnite na lokalnega distributerja. Shranite dokazilo o nakupu za uveljavljanje garancije.
