MAIMEIMI GPS Speedometer 85mm (3-3/8") Instruction Manual

1. Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of your MAIMEIMI 85mm GPS Speedometer. Designed for a wide range of applications including cars, tractors, trucks, boats, and marine vessels, this speedometer features a clear TFT screen, IP67 waterproof rating, and a wide 9-32VDC working voltage range. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Vsebina paketa

Ko odprete paket, preverite, ali so priloženi vsi naslednji elementi:

• 1 x GPS Speedometer (85mm / 3-3/8")
• 1 x GPS Antenna (3-meter cable length)
• 1 x Navodila za uporabo

Image: Contents of the MAIMEIMI GPS Speedometer package.

3. Značilnosti izdelka

• TFT Screen Display: Provides clear visibility of speed, odometer, trip meter, battery voltage, and course over ground (COG).
• Wide Voltage Domet: Operates on 9-32VDC, suitable for various vehicle types.
• Waterproof & Anti-fogging: IP67 rated for water and fog resistance, ensuring reliable performance in challenging environments.
• Multiple Unit Switching: Easily switch between kilometers per hour (km/h), miles per hour (mph), and knots (rounded to one decimal).
• Pridobivanje GPS signala: Initial signal acquisition takes approximately 30 seconds, with faster connections under clear skies.
• Odometer & Trip Meter: Odometer (0-999999km) is adjustable via the back button. Trip meter (0-999.9km) resets when power is off.
• Orientation Pointer: Displays Course Over Ground (COG) for directional awareness.

Image: Detailed display information of the GPS Speedometer.

Image: The speedometer undergoing a waterproof test.

4. Nastavitev in namestitev

Follow these steps for proper installation of your GPS Speedometer:

1. Priprava luknje za montažo: Open an 85mm (3 3/8") diameter hole in your panel. Ensure there is a 55mm (2 3/16") depth clearance behind the panel for the gauge body.
2. Vstavite merilnik: Carefully place the speedometer into the prepared hole.
3. Pritrdite merilnik: Use the provided mounting ring to screw down and secure the gauge firmly in place.
4. Povežite ožičenje:
   • Connect the Black wire to Ground (-).
   • Connect the Red wire to 9-30VDC power supply.
5. Priključitev GPS antene: Plug the GPS antenna into the designated port on the back of the speedometer. The GPS antenna can be optionally mounted using 3M double-sided tape.

Image: Front and back dimensions of the GPS Speedometer.

Image: Basic wiring diagram for the speedometer.

Image: Step-by-step installation guide for the gauge.

5. Navodila za uporabo

Once installed and powered, the speedometer will begin searching for a GPS signal. After acquiring a signal, it will display speed and other data.

• Preklop enote: To change the speed unit (km/h, mph, or knots), press the button located on the back of the speedometer. The unit will cycle through the options and save automatically.
• Odometer Adjustment: The odometer value can be adjusted using the button on the back.
• Merilnik poti: The trip meter automatically resets to zero when the power is turned off.

Image: Display showing selectable speed units.

6. Vzdrževanje

To ensure the longevity and optimal performance of your GPS Speedometer, follow these general maintenance guidelines:

• Regularly clean the screen and bezel with a soft, damp krpo. Izogibajte se abrazivnim čistilom.
• Prepričajte se, da so vse ožičene povezave varne in brez korozije.
• Periodically check the GPS antenna for any damage or obstruction to maintain signal integrity.
• While the unit is IP67 waterproof, avoid prolonged submersion or high-pressure water jets.

7. Odpravljanje težav

If you encounter any issues with your GPS Speedometer, consider the following common solutions:

• Ni GPS signala: Zagotovite, da ima antena GPS neoviran view of the sky. Obstructions can block the signal. Allow up to 30 seconds for initial signal acquisition.
• Nepravilno branje hitrosti: Verify that the correct unit (km/h, mph, knots) is selected. If the issue persists, ensure the GPS antenna is securely connected.
• Zaslon ne deluje: Check all power connections to ensure they are secure and receiving the correct voltage (9-32V DC).
• Gumbi se ne odzivajo: Ensure the unit is clean and free from debris around the buttons.

Če težave po poskusu teh korakov ne izginejo, se za dodatno pomoč obrnite na podporo strankam.

8. Specifikacije

9. Garancija in podpora

For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official MAIMEIMI webspletnega mesta. Shranite dokazilo o nakupu za morebitne garancijske zahtevke.