KuWFi C910SP 4G LTE Router Instruction Manual

1. Uvod

This manual provides detailed instructions for the setup, operation, and maintenance of your KuWFi C910SP 4G LTE Router. Please read this manual thoroughly before using the device to ensure proper functionality and safety. The KuWFi C910SP is a 4G modem with Wi-Fi hotspot capabilities, designed to provide high-speed internet access by converting a 4G SIM card connection into a Wi-Fi network for up to 32 users.

2. Vsebina paketa

Preverite, ali so v paketu vsi spodaj navedeni predmeti. Če kateri koli predmet manjka ali je poškodovan, se obrnite na podporo strankam.

• KuWFi C910SP 4G LTE Router
• Napajalni adapter
• Ethernet kabel
• Uporabniški priročnik

The package includes the KuWFi C910SP router unit, a power adapter for electrical connection, an Ethernet cable for wired network setup, and a user manual for detailed instructions.

3. Izdelek je končanview

3.1. Postavitev naprave

The rear panel of the router features the power input, a reset button, two LAN ports for wired connections, a WAN port for external internet connection, and the dedicated slot for inserting the SIM card.

3.2. Indikatorji

• Indikator moči: Označuje stanje napajanja naprave.
• Indikator Wi-Fi: Prikazuje stanje omrežja Wi-Fi.
• 4G LTE Signal Indicator: Displays the strength of the 4G LTE signal.

4. Nastavitev

4.1. Namestitev kartice SIM

1. Prepričajte se, da je usmerjevalnik izklopljen.
2. Locate the SIM card slot on the rear panel of the router.
3. Insert a standard-sized 4G SIM card into the slot with the metal contacts facing down and the notched corner oriented correctly. Push until it clicks into place.
4. Ensure your SIM card is activated and its frequency band is compatible with the router (B1/B3/B7/B8/B20 for 4G LTE FDD; B38/B39/B40/B41 for 4G LTE FDD; B1/B8 for 3G WCDMA).

This image illustrates the compatible SIM card size for the router. Only standard-sized SIM cards are supported. Micro and Nano SIM cards are not compatible and should not be used directly without an adapter.

4.2. Napajalni priključek

1. Priključite napajalnik na vhodno vtičnico usmerjevalnika.
2. Drugi konec napajalnika priključite v standardno električno vtičnico.
3. The power indicator light on the router should illuminate, indicating the device is receiving power.

4.3. Začetna povezava z omrežjem Wi-Fi

1. Wait for the router to boot up completely. The Wi-Fi and 4G LTE signal indicators should stabilize.
2. V računalniku ali mobilni napravi poiščite razpoložljiva omrežja Wi-Fi.
3. Select the network with SSID: CPE_2.4G_001A60.
4. Enter the default Wi-Fi password: 12345678.
5. Once connected, your device should have internet access via the router's 4G connection.

5. Navodila za uporabo

5.1. Dostop do Web Upravljalni vmesnik

Za konfiguracijo naprednih nastavitev dostopite do usmerjevalnika web upravljalni vmesnik:

1. Prepričajte se, da je vaša naprava povezana z omrežjem Wi-Fi usmerjevalnika ali prek ethernetnega kabla.
2. Odpri a web brskalnik (npr. Chrome, Firefox, Edge).
3. V naslovno vrstico vnesite privzeti naslov IP: 192.168.10.1 in pritisnite Enter.
4. On the login page, enter the default username and password: admin za oba.
5. Click 'Login' to access the router's settings.

5.2. Basic Wireless Settings

V okviru web vmesnik, pojdite na Wireless Setting > 2.4G Basic Setting to modify your Wi-Fi network details:

• SSID: Change the network name (e.g., "MyHomeWiFi").
• geslo: Update the Wi-Fi password for security.
• Kanal: Adjust the Wi-Fi channel if experiencing interference.
• Širina traku: Select appropriate bandwidth (e.g., 20MHz, 40MHz).

Remember to click 'Save' after making any changes.

6. Napredne nastavitve

The web management interface offers various advanced configurations:

6.1. Omrežne nastavitve

• Nastavitev WAN: Configure the Wide Area Network connection. Default is DHCP.
• LAN Setting: Adjust the router's Local Area Network IP address and subnet mask.
• Nastavitev DHCP: Manage the DHCP server, including IP address range and lease time.
• 4G Setting: Configure 4G dial-up settings, including APN (Access Point Name). You may need to disable SIM PIN and manually set the APN based on your operator's information.
• VPN Setting: Supports OpenVPN, PPTP, and L2TP client configurations.
• Ping Reboot: Configure the router to automatically reboot if it loses internet connectivity (ping target).

6.2. System Admin

• Web Nadzor dostopa: Manage access to the web vmesnik.
• Varnostno kopiranje/obnovitev: Save or load router configurations.
• Nadgradnja vdelane programske opreme: Posodobite vdelano programsko opremo usmerjevalnika.
• Nastavitev časa: Configure the device's time and date.
• Ponovni zagon: Ponovno zaženite usmerjevalnik.
• Sistemski dnevnik: View system activity and error logs.

6.3. Napredne nastavitve

• Intranet Passthrough: Configure internal network passthrough rules.
• DTU Setting: Data Transfer Unit settings.
• Remote Help: Enable or disable remote assistance features.
• Nastavitev DMZ: Configure a Demilitarized Zone.
• Preslikava vrat: Set up port forwarding rules.
• Static Route: Configure static routing entries.

7. Odpravljanje težav

If you encounter issues with your KuWFi C910SP router, refer to the following common problems and solutions:

• Ni internetne povezave:
  • Check if the 4G LTE signal indicator is lit and stable.
  • Prepričajte se, da je kartica SIM pravilno vstavljena in aktivirana.
  • Verify the APN settings in the web interface (Network Setting > 4G Setting). Contact your mobile operator for correct APN details.
  • Confirm that your SIM card supports the router's frequency bands.
  • Znova zaženite usmerjevalnik in povezano napravo.
• Weak Wi-Fi Signal or Frequent Disconnections:
  • Relocate the router to a central position, away from obstacles and interference sources (e.g., microwaves, cordless phones).
  • Adjust the Wi-Fi channel in the web interface (Wireless Setting > 2.4G Basic Setting) to avoid crowded channels.
  • Ensure the router's antennas are properly oriented.
• Dostop ni mogoč Web Vmesnik za upravljanje:
  • Preverite, ali je vaša naprava povezana z omrežjem usmerjevalnika.
  • Ensure you are typing the correct IP address (192.168.10.1) in the browser.
  • Počistite predpomnilnik in piškotke brskalnika ali poskusite z drugim brskalnikom.
  • Confirm the login credentials (default: admin/admin).
  • If you have forgotten your password, you may need to perform a factory reset (see Section 8.1).
• Počasna internetna hitrost:
  • Check the 4G signal strength. A weak signal will result in slower speeds.
  • Prepričajte se, da nobena druga naprava ne porablja prekomerne pasovne širine.
  • Contact your mobile operator to check for network issues in your area.

7.1. Tovarniška ponastavitev

If troubleshooting steps do not resolve the issue, you can perform a factory reset. This will revert all settings to their default values.

1. With the router powered on, locate the 'Reset' button on the rear panel.
2. Use a paperclip or a thin object to press and hold the 'Reset' button for approximately 10 seconds.
3. Release the button when the router's indicator lights flash.
4. The router will reboot with factory default settings. You will need to reconfigure it.

8. Specifikacije

9. Varnostne informacije

• Naprave ne izpostavljajte vodi, ognju ali visokim temperaturam.
• Uporabljajte samo priloženi napajalnik.
• Izogibajte se postavljanju usmerjevalnika v bližino močnih elektromagnetnih polj.
• Naprave ne poskušajte razstaviti ali popraviti sami.
• Napravo hranite izven dosega otrok.

10. Garancija in podpora

KuWFi offers the following support for your C910SP router:

• 30-dnevno celotno vračilo: Return your undamaged router within 30 days of purchase for any reason to receive a full refund.
• 12-Month Quality Warranty: For 12 months after the purchase date, all quality-related issues are covered with a replacement or full refund.

For further assistance, please contact KuWFi customer service.