Aigostar Retro Desk Lamp Uporabniški priročnik

1. Uvod

Thank you for choosing the Aigostar Retro Desk LampTa priročnik vsebuje bistvene informacije za varno in učinkovito uporabo vašega novega lampPred montažo in uporabo natančno preberite ta navodila in jih shranite za poznejšo uporabo.

Figure 1: Aigostar Retro Desk Lamp v uporabi.

2. Vsebina paketa

Ensure all components are present and undamaged before proceeding with assembly. If any parts are missing or damaged, please contact customer support.

• Lamp Osnova
• Adjustable Wooden Arm Assembly
• Lamp Shade with E27 Socket
• Power Cord with On/Off Switch
• Uporabniški priročnik

Note: The light bulb is not included and must be purchased separately.

3. Navodila za nastavitev

The Aigostar Retro Desk Lamp is designed for tool-free setup. Follow these steps to assemble your lamp:

1. Razpakirajte komponente: Previdno odstranite vse dele iz embalaže.
2. Postavite osnovo: Postavite lamp podstavek na stabilni, ravni površini.
3. Attach Arm Assembly: The wooden arm assembly is pre-attached to the base and lamp head. Ensure all joints are securely tightened.
4. Namestite žarnico: Screw an E27 base bulb (maximum 40W) into the lamp vtičnico. Ne zategujte premočno.
5. Priključite napajanje: Priključite napajalni kabel v ustrezno električno vtičnico.

Figure 2: Tool-free setup for quick assembly.

Slika 3: Konecview od lamp komponente.

Slika 4: Lamp dimensions and bulb specifications.

4. Navodila za uporabo

Your Aigostar Retro Desk Lamp is designed for ease of use and flexibility.

4.1 Vklop/izklop

Locate the convenience button (switch) on the power cord. Press the switch to turn the lamp vklop ali izklop.

4.2 Adjusting the Lamp Arm

Lamp features a swivel hinge arm and multiple adjustable joints, allowing you to direct light precisely where needed. Gently loosen the wing nuts at the joints, adjust the arm to your desired position, and then tighten the wing nuts to secure it.

• Lamp head can rotate up to 210 degrees.
• The upper arm can adjust by 60 degrees.
• The lower arm can adjust by 15 degrees.

Figure 5: Demonstrating the adjustable design of the lamp.

Figure 6: Specific adjustment angles for optimal light positioning.

5. Vzdrževanje

5.1 Čiščenje

Za čiščenje lamp, ensure it is unplugged from the power outlet. Use a soft, dry cloth to wipe down the surfaces. Do not use abrasive cleaners or solvents, as these may damage the finish.

5.2 Zamenjava žarnice

Before replacing the bulb, always unplug the lamp and allow the old bulb to cool completely. Unscrew the old E27 bulb and screw in a new E27 bulb, ensuring it does not exceed 40W. Refer to Figure 4 for bulb specifications.

6. Odpravljanje težav

• Lamp ne vklopi:
  • Preverite, ali je napajalni kabel varno priključen v stensko vtičnico.
  • Ensure the bulb is correctly screwed into the socket and is not burnt out.
  • Verify that the on/off switch on the power cord is in the 'on' position.
• Utripanje luči:
  • Zategnite žarnico v grlu.
  • Poskusite z drugo žarnico, da izključite možnost okvarjene žarnice.
• Lamp arm is loose:
  • Tighten the wing nuts at the adjustable joints to secure the arm in place.

7. Specifikacije

8. Garancija in podpora

For warranty information or technical support, please refer to the documentation provided with your purchase or contact Aigostar customer service directly. Keep your purchase receipt as proof of purchase.