VJOYCAR 2-Way LCD Pager Remote Control DIY Install System

Uporabniški priročnik za brezžični avtomobilski alarmni sistem

Znamka: VJOYCAR

Model: 2-Way LCD Pager Remote Control DIY Install System

Uvod

This manual provides comprehensive instructions for the installation, operation, and maintenance of your VJOYCAR Wireless Car Alarm System. This universal vehicle anti-theft security system features a 2-way LCD pager remote control, a siren horn, and integrated shock, vibration, window, door, and trunk open alarm capabilities. Designed for DIY installation, it offers advanced security without complex wiring.

Vsebina paketa

Preverite, ali so v paketu prisotne vse komponente:

Components of the VJOYCAR Wireless Car Alarm System, including the siren, two remote keys, air sensor, and antenna.

Figure 1: Included components of the VJOYCAR Wireless Car Alarm System.

Nastavitev in namestitev

The VJOYCAR Wireless Car Alarm System is designed for quick and easy DIY installation, typically taking about 5 minutes. No cutting of original car cables is required, preserving your vehicle's circuit integrity.

Siren Installation

  1. Connect the red cable of the siren to the car battery's positive (+) terminal.
  2. Connect the black cable of the siren to the car battery's negative (-) terminal.
  3. Connect the high frequency antenna to the designated connector on the siren.
  4. Securely fix the siren in a suitable location, such as near the wiper, ensuring it is stable and protected.
Diagram showing the easy DIY installation of the car alarm siren by connecting red and black cables to the car battery.

Figure 2: Simplified diagram of the siren's power connection to the car battery.

Air Pressure Sensor Setup

  1. Locate the on/off button on the car adaptor air sensor and turn it on. The LED light will flash, indicating it is active.
  2. Plug the car adaptor air sensor into your car's cigarette lighter port. The red light will flash, confirming it is working.
  3. The air sensor can be removed and hidden anywhere in the car after it is fully charged (lasts for approximately 5 days on a full charge).
Image showing the car adaptor air sensor and its battery indicator, emphasizing its portability and charging via cigarette lighter.

Figure 3: The car adaptor air sensor, designed for easy plug-and-play operation.

Video vodnik za namestitev

Video 1: Official VJOYCAR installation guide demonstrating the connection of the siren and antenna to the car battery.

Navodila za uporabo

Vklop in izklop sistema

Use the 2-way LCD pager remote control to arm or disarm the alarm system. When armed, the system monitors for unauthorized entry or significant vibrations.

Video 2: Demonstration of arming and disarming the alarm system using the remote control.

2-Way Pager and Long Distance Monitoring

The system features a 2-way LCD pager remote control that receives notifications from the alarm siren. The RF high-frequency antenna ensures a communication range of up to 1000 meters (in open air conditions).

Image illustrating the 1000-meter range of the 2-way pager alarm system, showing a car in a parking lot and the remote control.

Figure 4: The 2-way pager remote control provides real-time alerts over long distances.

Sensor Functionality

The system incorporates multiple sensors to detect various threats:

Two images: top shows a car door being opened with a red dot indicating air sensor detection; bottom shows a car being towed with a red dot indicating shock sensor detection.

Figure 5: Visual representation of air sensor detecting door/trunk opening and shock sensor detecting car movement.

Video 3: Demonstration of the alarm triggering when a car door is opened.

Video 4: Demonstration of the alarm triggering when the car trunk is opened.

Find Car Function

With just one click on your remote, you can activate a function to help you locate your car in a large parking area.

Image showing a car park with a red location pin indicating the 'Find Car' feature, alongside the two remote keys.

Figure 6: The 'Find Car' feature assists in locating your vehicle.

Adjusting Vibration Sensitivity

The system offers 8 levels of vibration sensitivity, from low to high. You can adjust this setting to suit your environment and prevent false alarms.

Image showing the siren and remote keys with text indicating '8 Level of vibration sensitivity' and '1-8' for adjustment.

Figure 7: Adjusting the vibration sensitivity of the alarm system.

Video 5: Guide on how to adjust the siren's sensitivity using the remote control.

Načini sprožitve

The alarm system supports four different trigger modes:

Image showing the siren and remote keys with text describing the '4 Kinds of Trigger Mode' and their functions.

Slika 8: Konecview of the four available trigger modes for the alarm system.

Vzdrževanje

To ensure the longevity and optimal performance of your VJOYCAR Wireless Car Alarm System, follow these general maintenance guidelines:

Odpravljanje težav

If you encounter issues with your VJOYCAR Wireless Car Alarm System, please consult the following common troubleshooting steps:

Težava Možen vzrok/rešitev
Siren does not sound or stops working.
  • Preverite napajanje: Ensure the siren is perfectly installed and both power cables (red and black) have a secure power supply from the car battery.
  • Remote Control Setting: Verify that the 2-way remote control is not set to "auto disarm" mode. In this mode, if the remote is close to the car, the siren may not sound even if the car is shaken, as it disarms automatically.
  • Način izklopa zvoka: Check if the remote control is in "mute" mode (often activated by pressing a specific button, e.g., '#'). In mute mode, the siren will not sound, but the alarm will still notify the 2-way remote control.
  • Aktivacijski način: Confirm that the vibration working mode is activated and on for both 1-way and 2-way remote controls.
  • Obrnite se na podporo: If the issue persists, contact VJOYCAR customer support for further assistance or a potential replacement siren.
False alarms or excessive sensitivity.
  • Prilagodite občutljivost: The system has 8 levels of vibration sensitivity. Adjust it to a lower level if you are experiencing too many false alarms. Refer to the "Adjusting Vibration Sensitivity" section.
  • Način sprožilca: Consider changing the trigger mode to one that is less sensitive to minor disturbances, such as Mode 4 which forbids vibration triggers.
Daljinski upravljalnik se ne odziva.
  • Preverite baterijo: Ensure the remote control's battery is not depleted. Replace if necessary.
  • Razpon: Verify you are within the 1000-meter operating range. Obstacles like buildings can reduce effective range.

For any complex issues or if troubleshooting steps do not resolve the problem, please do not hesitate to contact VJOYCAR customer support. They can provide the latest user manual or specific assistance.

Specifikacije izdelka

Funkcija Podrobnost
Znamka VJOYCAR
Teža predmeta 1.63 funtov
Dimenzije paketa 7.83 x 6.3 x 3.39 palcev
Brezžični daljinski upravljalnik ja
Združljive naprave Cars (12-15V power input)
Največji doseg 1000 Meters (RF high frequency antenna)
Nivo hrupa 125 dB
Senzorji Built-in shock/vibration sensor, built-in air pressure sensor
Vrsta namestitve Naredi sam (Naredi sam)

Garancija in podpora

For warranty information, technical support, or to obtain the latest version of this user manual, please contact VJOYCAR customer service through their official channels. Your satisfaction is important, and they are available to assist with any questions or concerns regarding your product.

Lahko se obrnete tudi na uradno Uporabniški priročnik (PDF) za dodatne podrobnosti.

Povezani dokumenti - 2-Way LCD Pager Remote Control DIY Install System

Prejview Brezžični avtomobilski alarmni sistem VJOYCAR X6: Navodila za namestitev in uporabo
Podroben priročnik za namestitev in uporabo brezžičnega avtomobilskega alarmnega sistema VJOYCAR X6. Vsebuje vsebino paketa, navodila za namestitev sirene, antene in senzorja zraka po korakih ter obsežna navodila za uporabo enosmernih in dvosmernih daljinskih upravljalnikov, vključno z nastavitvami sprožilca in občutljivosti.
Prejview Uporabniški priročnik za T10: Funkcije, specifikacije in delovanje
Obsežen uporabniški priročnik za sledilno napravo GPS T10. Spoznajte njene funkcije, specifikacije strojne opreme, namestitev, SMS ukaze za sledenje, oddaljeno poslušanje, opozorila in upravljanje porabe energije.
Prejview V70 OBD Car Computer Gauge User Manual
User manual for the V70 OBD car computer gauge, detailing its production description, specifications, operating settings, software updates, data stream parameters, and service procedures.
Prejview Tehnične specifikacije in uporabniški priročnik za VJOYCAR GPS HUD
Podrobne tehnične specifikacije, navodila za uporabo in informacije o garanciji za VJOYCAR GPS Head-Up Display (HUD) za avtomobile in tovornjake. Spoznajte njegove funkcije, zahteve glede napajanja, pogoje delovanja in garancijsko politiko.
Prejview Uporabniški priročnik za GPS sledilnik vozil - VJOYCAR
Obsežen uporabniški priročnik za sledilnik vozil VJOYCAR GPS (različica V2.1), ki zajema namestitev, nastavitev, delovanje, upravljanje alarmov in odpravljanje težav.
Prejview Uporabniški priročnik za 5.5-palčni projekcijski zaslon (HUD) VJOYCAR W02 - namestitev, nastavitve in delovanje
Obsežen uporabniški priročnik za 5.5-palčni OBDII projekcijski zaslon (HUD) VJOYCAR W02. Ta priročnik zajema namestitev, glavne funkcije, podrobne nastavitve, običajne postopke delovanja, odpravljanje pogostih težav in tehnične specifikacije za varno in udobno vožnjo.