Pedrollo DG PED 3 - Compact Silent Variable Speed Booster Pump User Manual

1. Uvod

The Pedrollo DG PED 3 is an advanced, compact, and silent variable speed booster pump designed to provide constant water pressure in domestic installations. This all-in-one device effectively addresses issues of weak water pressure and inconsistent flow, enhancing overall comfort in your home.

Glavne lastnosti vključujejo:

• Compact, all-in-one design.
• Energy-saving operation due to variable speed technology.
• Ultra-silent performance.
• Automatic operation to maintain constant pressure and prevent drops.
• Easy to adjust, use, and quick to install.
• Suitable for various water sources including distribution networks, tanks, or shallow wells (up to 8 meters).

Slika 1.1: Sprednja stran view of the Pedrollo DG PED 3 booster pump, showcasing njegovo kompaktno zasnovo in nadzorno ploščo.

2. Varnostna navodila

Please read and understand all safety instructions before installing, operating, or performing maintenance on the DG PED 3 pump. Failure to follow these instructions could result in electric shock, fire, serious injury, or property damage.

• Pred servisiranjem črpalke vedno izklopite napajanje.
• Installation must be performed by a qualified professional in accordance with local electrical and plumbing codes.
• Prepričajte se, da je črpalka pravilno ozemljena.
• Črpalke ne uporabljajte s poškodovanimi kabli ali vtiči.
• Črpalko zaščitite pred zmrzaljo.
• Do not use the pump for flammable or corrosive liquids.
• Med delovanjem naj se otroci in nepooblaščene osebe ne približujejo črpalki.

3. Komponente in krmilniki

Familiarize yourself with the main components and controls of your DG PED 3 pump.

Slika 3.1: Spredaj view highlighting the control panel and various ports.

• Nadzorna plošča: Digital display and buttons for setting parameters and monitoring status.
• Stikalo za vklop: Main on/off switch for the unit.
• Inlet (IN): Connection point for water entering the pump.
• Outlet (OUT): Connection point for pressurized water leaving the pump.
• Senzor tlaka: Monitors system pressure to adjust pump speed.
• Senzor pretoka: Detects water flow to activate/deactivate the pump.

Slika 3.2: stran view showing the clearly labeled IN (Inlet) and OUT (Outlet) connections, along with the "INVERTER HOME PUMP" designation.

Slika 3.3: Zgornji del view providing another perspective of the IN and OUT connections, essential for plumbing setup.

4. Nastavitev in namestitev

The DG PED 3 is designed for straightforward integration into new or existing pressurization systems. Professional installation is recommended.

4.1. Umestitev

• Črpalko namestite v suhem, dobro prezračevanem prostoru, zaščitenem pred neposredno sončno svetlobo in zmrzaljo.
• Ensure sufficient space around the unit for ventilation and maintenance access.
• Mount the pump on a stable, level surface to minimize vibration and noise.

4.2. Vodovodni priključki

• Connect the water supply line to the "IN" (Inlet) port.
• Connect the household distribution line to the "OUT" (Outlet) port.
• Use appropriate fittings and sealants to ensure watertight connections.
• Consider installing isolation valves on both inlet and outlet for easier maintenance.

Slika 4.1: Nprample of the DG PED 3 pump connected with external piping, illustrating typical installation.

4.3. Električna povezava

• Prepričajte se, da napajanje ustreza volumnu črpalketagzahteve (220 V AC).
• Connect the pump to a dedicated, properly grounded electrical circuit.
• Izogibajte se uporabi podaljškov.

4.4. Initial Priming (if applicable)

Follow the specific instructions in the full product manual for initial priming of the pump to ensure it is filled with water before first use.

5. Navodila za uporabo

The DG PED 3 operates automatically to maintain constant water pressure.

5.1. Vklop

• Once installed and primed, switch the main power switch to the "ON" position.
• The pump will perform a self-check and then enter standby mode.

5.2. Samodejno delovanje

• The pump will automatically start when water demand is detected (e.g., opening a faucet).
• It will adjust its speed to maintain the desired constant pressure, even with multiple outlets open.
• The pump will automatically stop when water demand ceases.

5.3. Setting Pressure (if adjustable)

Refer to the control panel and the full product manual for instructions on how to adjust the desired pressure set point. The DG PED 3 typically has a default set point of 3 bar, with an operating range of 1 to 5.5 bar.

Figure 5.1: Performance curve for DG PED 3, showing Head (H in meters) vs. Flow (Q in liters/minute). The shaded area indicates the operating range, with a typical set point at 3 bar.

6. Vzdrževanje

Regular maintenance ensures optimal performance and extends the lifespan of your DG PED 3 pump. Always disconnect power before performing any maintenance.

• Redni pregled: Periodically check for any visible leaks, unusual noises, or vibrations.
• Čistoča: Keep the exterior of the pump clean and free from dust and debris to ensure proper ventilation.
• Filter Check (if applicable): If your system includes an inlet filter, inspect and clean it regularly to prevent clogging and maintain flow.
• Zimovanje: If the pump is installed in an area subject to freezing temperatures, ensure it is properly drained and protected during winter months to prevent damage.

7. Odpravljanje težav

V tem razdelku so rešitve za pogoste težave. Za bolj zapletene težave se obrnite na usposobljeno servisno osebje.

8. Specifikacije

9. Garancija in podpora

The Pedrollo DG PED 3 pump comes with a 2-letna garancija od datuma nakupa, ki krije proizvodne napake. Prosimo, shranite dokazilo o nakupu za uveljavljanje garancije.

For technical support, spare parts, or warranty service, please contact your authorized Pedrollo dealer or visit the official Pedrollo webspletno mesto za kontaktne podatke.

Pomembno: Any unauthorized repairs or modifications to the pump will void the warranty.