1. Uvod
The HaiweiTech HHD-101 is a versatile H.265/H.264 4K Video Audio Decoder designed for various professional applications, including advertisement displays, video encoding, and IP camera decoding. It supports a wide range of IP protocols such as RTMP, RTSP, RTP, HTTP, HLS, and UDP, and offers both HDMI (up to 4K@30FPS) and CVBS/BNC outputs. This manual provides comprehensive instructions for the setup, operation, and maintenance of your HHD-101 decoder.
2. Varnostne informacije
- Ensure the device is powered by a 12V 2A power supply. Using an incorrect power supply may damage the unit.
- Naprave ne izpostavljajte vodi, vlagi ali ekstremnim temperaturam.
- Naprave ne postavljajte na neposredno sončno svetlobo ali v bližino virov toplote.
- Naprave ne poskušajte odpirati ali popravljati sami. Vsa servisna dela prepustite usposobljenemu osebju.
- Poskrbite za ustrezno prezračevanje okoli naprave, da preprečite pregrevanje.
- Pred čiščenjem ali premikanjem naprave izklopite napajanje.
3. Vsebina paketa
Please check the package contents upon unpacking. If any items are missing or damaged, contact your vendor immediately.
- HaiweiTech HHD-101 Decoder Unit
- 12V napajalnik
- Uporabniški priročnik (ta dokument)
4. Izdelek je končanview
Familiarize yourself with the various ports and indicators on the HHD-101 decoder.
Slika 4.1: Sprednja plošča zgorajview of HHD-101 Decoder.
Slika 4.2: Zadnja ploščaview of HHD-101 Decoder.
Figure 4.3: Detailed Port Diagram and Descriptions.
Opisi vrat:
- LAN (Ethernet port): Used for network connection. Configuration of the IP gateway may be required for normal operation.
- LED indikatorji:
- Red: Power ON
- Green: Network activity
- RST (Ponastavitev): Press and hold the RST button until the green LED light turns off to reset the device.
- AV OUT (CVBS out): Kompozitni video izhod.
- HDMI OUT (HDMI out): High-Definition Multimedia Interface output.
- BNC OUT (BNC out): BNC konektor za video izhod.
- RS485: Serial communication port (GEN, IO-1, IO-2, 485A, 485B).
- Napajanje: 12V 2A DC power input.
5. Nastavitev
Follow these steps to set up your HHD-101 decoder:
- Priključite napajanje: Connect the provided 12V 2A power adapter to the "Power In" port (8) on the rear panel of the decoder. Plug the adapter into a power outlet. The red LED indicator should illuminate.
- Omrežna povezava: Connect an Ethernet cable from your network router or switch to the "LAN" port (1) on the front panel. The green LED indicator should illuminate, indicating network activity.
- Priključek za video izhod:
- For HDMI output: Connect an HDMI cable from the "HDMI OUT" port (5) to your display device (e.g., TV, monitor).
- For CVBS/BNC output: Connect a BNC cable from the "BNC OUT" port (6) or an AV cable from the "AV OUT" port (4) to your display device.
- Audio Output (if applicable): If using AV OUT, audio will be carried through the composite cable. For HDMI, audio is embedded in the HDMI signal.
- RS485 Connection (Optional): If required for control or data transmission, connect your RS485 devices to the RS485 terminal block (7).
Once all connections are made, the device is ready for configuration and operation.
6. Navodila za uporabo
The HHD-101 decoder is designed to receive and decode various IP video streams. Operation typically involves configuring the decoder via its web interface to receive the desired stream.
6.1. Dostop do Web Vmesnik
- Ensure the decoder is connected to your network as described in the Setup section.
- Find the IP address of the decoder. This can often be done using a network scanning tool or by checking your router's connected devices list. The default IP address is typically provided in the separate software utility or quick start guide.
- Odpri a web brskalnik v računalniku, ki je povezan v isto omrežje.
- Enter the decoder's IP address into the browser's address bar and press Enter.
- Log in using the default username and password (refer to the quick start guide or contact support if unknown).
6.2. Configuring IP Stream Decoding
V okviru web interface, you will find options to configure the input stream. The HHD-101 supports multiple protocols:
Figure 6.1: Supported IP Protocols for HHD-101 Decoder.
- Navigate to the "Input Settings" or "Stream Configuration" section.
- Select the desired protocol (e.g., RTMP, RTSP, HLS, UDP).
- Enter the source IP address or URL of the video stream you wish to decode.
- Configure any additional parameters such as port numbers, authentication credentials, or specific stream IDs as required by your source.
- Save the settings. The decoder should begin receiving and outputting the video stream to the connected display.
6.3. Več-View Dekodiranje
The HHD-101 supports decoding up to 4 channels for multi-view display. Consult the web interface documentation for specific instructions on configuring multi-view layouts and switching between sources.
6.4. Proprietary Protocol (P-P)
For ultra-low latency point-to-point transmission, the HHD-101 decoder can be used with Haiwei proprietary protocol encoders. This solution is available only when using both HaiweiTech encoders and decoders.
Figure 6.2: Typical System Diagram with HaiweiTech Encoder and Decoder.
7. Vzdrževanje
- Čiščenje: Za čiščenje zunanjosti naprave uporabite mehko, suho krpo. Ne uporabljajte tekočih čistil ali aerosolov.
- Prezračevanje: Ensure the ventilation slots are clear of dust and obstructions to maintain proper airflow.
- Posodobitve vdelane programske opreme: Periodically check the HaiweiTech webZa optimalno delovanje in dostop do novih funkcij obiščite spletno mesto ali se obrnite na podporo za razpoložljive posodobitve vdelane programske opreme.
- Shranjevanje: Če napravo shranjujete dalj časa, jo izključite iz električnega omrežja in jo shranite na hladnem in suhem mestu.
8. Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| No power (Red LED off) | Napajalnik ni priključen ali je pokvarjen; težava z vtičnico. | Check power adapter connection. Try a different power outlet. Ensure 12V 2A power supply is used. |
| No network connection (Green LED off/flashing irregularly) | Ethernet cable disconnected or faulty; incorrect IP configuration; network issue. | Check Ethernet cable connection. Verify network settings and IP address. Restart router/switch. |
| Ni video izhoda | Incorrect input stream URL/settings; display device not selected correctly; faulty HDMI/AV/BNC cable; display resolution incompatibility. | Verify stream URL and protocol in web interface. Ensure correct input is selected on your display. Try a different cable. Check if output resolution is supported by display. |
| Video stuttering or freezing | Insufficient network bandwidth; unstable source stream; decoder overload. | Check network speed and stability. Verify source stream quality. Reduce the number of simultaneous decoding channels if applicable. |
| Ni mogoče dostopati web vmesnik | Napačen IP-naslov; težave z omrežno povezljivostjo; požarni zid blokira dostop. | Confirm decoder's IP address. Ensure computer is on the same subnet. Temporarily disable firewall on computer. |
9. Specifikacije
| Funkcija | Podrobnost |
|---|---|
| Številka modela | HHD-101 |
| Vnos | Up to 4 (multi-view) Channel H.264/H.265 IP (RTMP/RTSP/RTP/HTTP/HLS/UDP), MPEG1, MPEG2, MPEG4, SL hyperlink (P-P), VP8/VP9/AVS/AVS+ |
| Izhod | 1x HDMI (up to 4096*2160P 30FPS), 1 channel CVBS/BNC, RS485 out |
| Podpora za ločljivost | 4096*2160 30/25/24, 3840*2160 30/25/24, 1080P 60/50/30/25/24, 1080I 60/50, 720P 60/50/25/24, 576P 50 |
| Tehnologija povezljivosti | HDMI |
| Združljive naprave | televizija |
| Dimenzije paketa | 10.83 x 8.46 x 3.15 palcev |
| Teža predmeta | 2.2 funta (približno 1 kilogram) |
| Proizvajalec | HaiweiTech |
10. Garancija in podpora
For warranty information, please refer to the documentation provided at the time of purchase or visit the official HaiweiTech website. For technical support, additional manufacturing services (SDK/API, IP finder/Video management platform/IOS Android APP), solution analysis, or OEM services, please contact HaiweiTech directly. Contact details are typically available on the manufacturer's website or through your vendor.
Note: Haiwei proprietary protocol based ultra low latency point to point transmission solution is available with the decoder only. Additional manufacturing Services:SDK/API,IP finder/Video management platform/IOS Android APP,Solution analyze,OEM(more detail:hansen(at)hwsxtec(.)com)
