1. Uvod
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Pedrollo 3CRm80 Multi-stage Centrifugal Water Pump. Please read this manual thoroughly before installation and use, and retain it for future reference.
The Pedrollo 3CRm80 is a single-phase, multi-stage centrifugal pump designed for handling clean water and non-aggressive liquids. It is suitable for domestic applications such as water distribution in pressure systems and garden irrigation.
2. Varnostne informacije
Vedno upoštevajte naslednje varnostne ukrepe, da preprečite telesne poškodbe in poškodbe črpalke:
- Ensure the pump is installed in a well-ventilated, enclosed area, protected from adverse weather conditions.
- Verify that the electrical supply matches the pump's voltage requirements (110V or 220V, 60Hz).
- Pred kakršnimi koli namestitvenimi, vzdrževalnimi ali popravilnimi deli izklopite napajanje.
- Črpalke ne uporabljajte z vnetljivimi ali korozivnimi tekočinami.
- Črpalko zaščitite pred zmrzaljo.
- Zagotovite pravilno ozemljitev električnega priključka.
3. Tehnične specifikacije
| Funkcija | Specifikacija |
|---|---|
| Model | 3CRm80 |
| Znamka | Pedrollo |
| Vrsta | Multi-stage Centrifugal Water Pump |
| Moč | 0.6 KM |
| voltage | 110V or 220V AC, 60Hz (Single Phase) |
| Največja glava | Do 120 ft (36.5 metrov) |
| Največji pretok | Up to 1260 GPH (4769 liters/hour) |
| Velikost vhoda / izhoda | 1 palcev x 1 palec |
| Material | Nerjaveče jeklo |
| Teža predmeta | 19 funta (približno 8.6 kg) |
| Dimenzije (paket) | 18 x 12 x 8 palca (približno 45.7 x 30.5 x 20.3 cm) |
| UPC | 722777873303 |
Slika 1: Pedrollo 3CRm80 Multi-stage Centrifugal Water Pump. This image displays the pump's stainless steel body and blue motor housing.
Slika 2: Performance Curve for Pedrollo CR series pumps. This graph illustrates the relationship between pump head (in meters and feet) and flow rate (in l/min and US g.p.m.) for various models, including the 3CRm80.
4. Nastavitev in namestitev
4.1 Lokacija
Install the pump in a dry, well-ventilated area, protected from direct sunlight, rain, and freezing temperatures. Ensure sufficient space around the pump for ventilation and maintenance.
4.2 Električna povezava
- The pump operates on single-phase 110V or 220V AC, 60Hz. Verify your power supply matches the pump's requirements.
- Ensure the electrical circuit is protected by a suitable circuit breaker or fuse.
- Črpalko priključite na pravilno ozemljeno električno vtičnico.
- The motor includes a thermal overload protector.
4.3 Vodovodni priključek
- Connect 1-inch pipes to both the inlet and outlet ports of the pump.
- Use appropriate sealants (e.g., PTFE tape) on threaded connections to prevent leaks.
- Prepričajte se, da so vse povezave tesne, vendar jih ne zategnite preveč.
- Install a foot valve with a strainer on the suction line if drawing water from a well or tank to prevent debris from entering the pump and to maintain prime.
4.4 Polnjenje črpalke
Before initial operation, the pump must be primed. Remove the priming plug (usually located on the top of the pump casing) in napolnite črpalko casing completely with clean water until it overflows. Replace the priming plug securely.
5. Navodila za uporabo
- Ensure the pump is properly installed and primed.
- Verify all plumbing connections are secure and leak-free.
- Connect the pump to the appropriate electrical power supply.
- Turn on the power. The pump should start operating and begin to move water.
- Monitor the pump for any unusual noises or vibrations during initial operation.
- If the pump fails to deliver water after a short period, turn off the power, re-prime the pump, and check for any obstructions in the suction line.
Aplikacije
The Pedrollo 3CRm80 pump is suitable for:
- Irrigation systems for gardens and allotments.
- Water supply systems for domestic use.
- Integration with small and medium-sized pressure sets.
6. Vzdrževanje
Redno vzdrževanje zagotavlja dolgo življenjsko dobo in optimalno delovanje vaše črpalke.
6.1 Splošni pregledi
- Periodically inspect the pump for any signs of leaks, corrosion, or damage.
- Ensure all electrical connections are secure and free from moisture.
- Check the suction line strainer (if installed) for blockages and clean as necessary.
6.2 Prezimovanje
If the pump is installed in an area subject to freezing temperatures, it must be drained to prevent damage:
- Odklopite napajanje črpalke.
- Open any drain plugs on the pump casing and plumbing lines.
- Pustite, da se vsa voda popolnoma odcedi.
- Črpalko po možnosti shranite na toplem in suhem mestu ali pa jo temeljito izpraznite in zaščitite pred zmrzovanjem.
7. Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Črpalka se ne zažene | No power; tripped circuit breaker; motor thermal overload activated. | Check power supply; reset circuit breaker; allow motor to cool down. |
| Črpalka deluje, vendar voda ne dovaja | Pump not primed; air leak in suction line; clogged suction strainer; insufficient water supply. | Re-prime the pump; check suction line connections; clean strainer; ensure adequate water source. |
| Zmanjšan pretok ali tlak | Partial blockage in plumbing; worn impeller; air in system. | Inspect and clear plumbing; consult a qualified technician for impeller inspection; re-prime. |
| Prekomerni hrup ali tresljaji | Cavitation (air in pump); loose mounting; foreign object in pump. | Ensure pump is fully primed and suction is clear; tighten mounting bolts; disconnect power and inspect pump for obstructions (consult technician if unsure). |
8. Garancija in podpora
For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact your authorized Pedrollo dealer. Keep your purchase receipt as proof of purchase.
Protection plans may be available for extended coverage. Please check with your retailer for details on 3-Year or 4-Year protection plans.
Manufacturer: Pedrollo
UPC: 722777873303
