FLEXISPOT Pro Corner Electric Standing Desk Instruction Manual

Uvod

This manual provides detailed instructions for the assembly, operation, and maintenance of your FLEXISPOT Pro Corner Electric Standing Desk. Please read this manual thoroughly before assembly and use to ensure safe and correct operation. Keep this manual for future reference.

Varnostne informacije

• Pred sestavljanjem se prepričajte, da so vse komponente prisotne in nepoškodovane. Ne uporabljajte, če kateri koli deli manjkajo ali so poškodovani.
• Assembly requires at least two people due to the weight and size of the components.
• Med delovanjem naj se otroci in hišni ljubljenčki ne približujejo mizi.
• Med nastavljanjem višine se prepričajte, da na poti mize ni ovir.
• Do not sit or stand on the desk. The maximum weight capacity is 220 lbs.
• Uporabljajte samo priloženi napajalnik.
• Pred čiščenjem ali vzdrževanjem izključite napajanje.

Vsebina paketa

Your FLEXISPOT Pro Corner Electric Standing Desk arrives in two separate packages. Please verify all parts are included before beginning assembly.

• L-shaped Desktop (Splice Board)
• Desk Frame (Dual Motor Lift System)
• Control Pad with USB Charger
• Montažna orodja
• Napajalni adapter in kabli
• Navodila za uporabo

Image: All components of the FLEXISPOT Pro Corner Electric Standing Desk laid out, including the L-shaped desktop, dual motor frame, and control panel.

Navodila za montažo

Follow these steps carefully for proper assembly. It is recommended to have two people for certain steps, especially when handling the desktop and flipping the assembled desk.

1. korak: Razpakirajte in prepoznajte dele

Carefully unpack all contents from both boxes. Refer to the package contents list to ensure all parts are present. Lay out all components on a clean, soft surface to prevent scratches.

Image: Illustration showing the desk components arriving in two separate packages.

2. korak: Sestavite okvir mize

Connect the various parts of the steel frame according to the diagrams provided in the included paper manual. Ensure all screws are tightened securely. The dual motor system should be integrated into the frame structure.

Image: Diagram illustrating the strong steel structure and dual motor system of the desk frame.

3. korak: Pritrdite namizje

Place the L-shaped desktop upside down on a soft, protected surface. Position the assembled frame onto the desktop, aligning the pre-drilled holes. Secure the frame to the desktop using the provided screws. Note that the L-shape is reversible, allowing for left-hand or right-hand configuration. Choose your desired orientation before securing the desktop.

Image: The L-shaped desk shown with both left and right configurations, highlighting its reversible design.

4. korak: Namestite nadzorno ploščo

Mount the control panel to the underside of the desktop in a convenient location. Connect the control panel cable to the motor control box as indicated in the wiring diagram. Ensure all connections are secure.

Image: Close-up of the advanced LED control panel with up/down movement buttons, height memory presets, sit/stand reminder, and a USB charger port.

Step 5: Connect Power and Position the Desk

With assistance, carefully flip the assembled desk upright and move it to its desired location. Connect the power adapter to the control box and then plug it into a wall outlet. Ensure cables are managed to prevent snagging during height adjustments.

Navodila za uporabo

Nastavitev višine

• Uporabite ▲ in ▼ arrows on the control panel to adjust the desk height. The desk will move smoothly between 28.9 inches and 48.2 inches.
• The current height is displayed on the LED screen.

Image: The desk shown at its minimum (28 inches) and maximum (47.2 inches) adjustable heights, demonstrating its versatility for sitting and standing positions.

Prednastavitve pomnilnika

• The control panel features three memory settings (1, 2, 3) to store your preferred sitting and standing heights.
• To save a height: Adjust the desk to your desired height, then press the M button followed by the desired number button (1, 2, or 3). The display will show "S-" and then the number, indicating the height is saved.
• To recall a saved height: Press the corresponding number button (1, 2, or 3). The desk will automatically move to the saved position.

Sit/Stand Reminder

• The control panel includes a sit/stand reminder function. Press the 'A' button to activate or deactivate this feature. Refer to the detailed instructions in the included paper manual for setting reminder intervals.

Vrata za polnjenje USB

• A USB charging port is integrated into the control panel for convenient charging of small electronic devices.

Anti-Collision Feature

• The desk is equipped with an anti-collision system. If the desk encounters an obstruction during height adjustment, it will automatically stop and reverse slightly to prevent damage.

Image: Illustration showing the anti-collision feature, where the desk stops and rebounds upon encountering an obstacle.

Vzdrževanje

• Regularly wipe the desktop and frame with a soft, damp krpo. Izogibajte se abrazivnim čistilom ali topilom.
• Check all screws and connections periodically to ensure they remain tight.
• Keep the area around the desk legs clear of dust and debris to ensure smooth operation of the lifting mechanism.
• Do not attempt to lubricate the motor or internal components.

Odpravljanje težav

Specifikacije

Garancija in podpora

FLEXISPOT provides the following warranty coverage for your product:

• 5-letno kritje: Desk frame and motor.
• 2-letno kritje: Control panel and electronics.

For customer support, please contact FLEXISPOT directly or refer to the contact information provided with your purchase documentation. You can also visit the official FLEXISPOT store for more information and assistance.

Prodajalec: FlexiSpot