1. Izdelek je končanview
The Montech X3 Mesh is an ATX Mid-Tower PC Gaming Case designed for high airflow and visual appeal. It comes equipped with six pre-installed fixed RGB lighting fans (3x 140mm in the front, 2x 120mm on top, and 1x 120mm in the rear) to optimize cooling and provide vibrant illumination. The case features a unique door-open tempered glass side panel for easy access and a full panoramic view of your internal components.
Figure 1: Montech X3 Mesh PC Gaming Case (Black)
2. Navodila za namestitev
2.1 Razpakiranje in začetni pregled
Carefully remove the case from its packaging. Inspect for any signs of damage during transit. Ensure all accessories, including screws and cable ties, are present.
2.2 Namestitev komponent
The Montech X3 Mesh supports ATX, Micro-ATX, and Mini-ITX motherboards. It offers ample space for CPU coolers up to 160mm high and GPUs up to 305mm long.
Figure 2: Internal Component Clearance
2.2.1 Namestitev matične plošče
- Open the tempered glass side panel by gently pulling the fabric tab.
- Namestite V/I zaščito v izrez matične plošče na zadnji strani ohišja.
- Align your motherboard with the standoffs inside the case and secure it with screws.
2.2.2 Namestitev napajalne enote (PSU).
The PSU is mounted at the rear bottom of the case. The case supports PSUs up to 160mm in length.
- Slide the PSU into its designated compartment from the rear of the case.
- Secure the PSU with screws from the outside.
2.2.3 Namestitev pogona za shranjevanje
The case provides bays for 2x 2.5" SSDs behind the motherboard tray and 2x 3.5" HDDs (or 2x 2.5" SSDs) in a removable cage below the PSU shroud.
Figure 3: Drive Bay Locations
- For 2.5" SSDs, mount them directly onto the SSD brackets behind the motherboard tray.
- For 3.5" HDDs, slide them into the drive cage located under the PSU shroud and secure. The drive cage is removable for easier installation or to create more space.
2.2.4 Namestitev grafične kartice (GPU)
Install your graphics card into the appropriate PCIe slot on your motherboard and secure it with the provided screws.
2.3 Upravljanje kablov
The Montech X3 Mesh offers dedicated cutouts and tie-down points behind the motherboard tray for efficient cable routing, ensuring a clean build and improved airflow.
Figure 4: Smart Cable Management Features
3. Navodila za uporabo
3.1 Vklop
Connect your power cable to the PSU and press the power button located on the top I/O panel.
Figure 5: Top I/O Panel
3.2 Nadzor osvetlitve RGB
The X3 Mesh features fixed RGB lighting fans. To turn the fan lighting on or off, simply press the dedicated LED button on the top I/O panel. Note that the lighting is fixed and not addressable.
Video 1: Demonstration of RGB Lighting Fans
This video showcases the fixed RGB lighting of the fans within the Montech X3 Mesh case, highlighting their visual effect when powered on.
3.3 Pretok zraka in hlajenje
The case is designed for high airflow, with triple 140mm fans in the front providing massive air intake and pre-mounted fans at the top and rear for optimal exhaust. This configuration helps maintain low temperatures for your components.
Figure 6: Optimized Airflow Design
4. Vzdrževanje
4.1 Čiščenje filtrov za prah
The Montech X3 Mesh includes a magnetic dust filter on the top panel and a washable dust filter for the PSU intake at the bottom. Regularly clean these filters to prevent dust buildup and maintain optimal airflow.
- Gently remove the magnetic dust filter from the top panel.
- Slide out the PSU dust filter from the bottom of the case.
- Clean the filters using compressed air or by washing them with water (ensure they are completely dry before re-installation).
4.2 Generalno čiščenje
Use a soft, dry cloth to wipe down the exterior of the case, including the tempered glass panel. For stubborn smudges on the glass, a glass cleaner can be used sparingly on the cloth, not directly on the panel.
5. Odpravljanje težav
5.1 Fans Not Spinning / RGB Not Lighting Up
- Ensure all fan Molex connectors are securely connected to your power supply. The pre-installed fans are daisy-chained, so check the connection to the last fan in the chain.
- Verify that the LED button on the top I/O panel is pressed to activate the RGB lighting.
- Check the power supply connections to the fan hub (if applicable) and the motherboard.
5.2 Poor Airflow / High Temperatures
- Clean all dust filters as described in Section 4.1.
- Ensure proper cable management to avoid obstructing airflow paths inside the case.
- Verify that all fans are spinning correctly.
6. Tehnične specifikacije
| Funkcija | Specifikacija |
|---|---|
| Ime modela | X3 MESH Black |
| Vrsta ohišja | Srednji stolp |
| Združljivost matične plošče | ATX, Micro ATX, Mini ITX |
| Dimenzije (DxŠxV) | 14.57 x 8.27 x 18.9 palcev |
| Teža predmeta | 14.3 funtov |
| Material | Tempered Glass (Side Panel) |
| Vnaprej nameščeni ventilatorji | Front: 3x 140mm Fixed RGB Top: 2x 120mm Fixed RGB Rear: 1x 120mm Fixed RGB |
| Podpora oboževalcev | Front: 3x 120mm/140mm Top: 2x 120mm/140mm Zadaj: 1x 120mm |
| Podpora za radiatorje | Vrh: do 280 mm Front: Up to 360mm (with HDD cage removed) |
| Odmik hladilnika procesorja | 160 mm |
| GPU dovoljenje | 305 mm |
| Drive Bays | 2x 2.5" SSD 2x 3.5" HDD (convertible to 2.5" SSD) |
| V/I vrata | 2x USB 2.0, 1x USB 3.0, HD Audio (Mic/Headphone), Power Button, Reset Button, LED Control Button |
| Vrsta montaže napajalnika | Zadnji nosilec |
7. Garancija in podpora
For warranty information, technical support, or to inquire about replacement parts, please refer to the official Montech webspletno mesto ali se obrnite neposredno na njihovo službo za stranke. Račun shranite kot dokazilo o nakupu za uveljavljanje garancije.
Montech offers various protection plans for extended coverage. Please visit the product page on Amazon or Montech's official website for details on available plans.
