1. Uvod
This manual provides detailed instructions for the installation, operation, and maintenance of your SEBSON Outdoor Motion Detector (Model: IR_OUT_BA). Please read this manual thoroughly before installation and use to ensure safe and correct operation. Keep this manual for future reference.
Slika 1.1: Spredaj view of the SEBSON Outdoor Motion Detector.
2. Varnostna navodila
Vedno upoštevajte naslednje varnostne ukrepe, da preprečite poškodbe ali škodo na napravi:
- Električna varnost: Installation and maintenance should only be performed by a qualified electrician. Always disconnect the main power supply before any installation, wiring, or maintenance work.
- voltage: Zagotovite delovno napetosttage of 230V AC matches your electrical supply.
- IP44 ocena: This device is rated IP44, meaning it is protected against solid objects larger than 1mm and splashing water from any direction. It is suitable for outdoor use but must not be submerged in water.
- Montaža: Mount the device securely on a stable surface. Do not install near flammable materials or heat sources.
- otroci: Embalažni material in majhne dele hranite izven dosega otrok.
3. Vsebina paketa
Paket vključuje:
- 1x SEBSON Outdoor Motion Detector (Model: IR_OUT_BA)
4. Izdelek je končanview in funkcije
The SEBSON Outdoor Motion Detector is designed for reliable motion detection in outdoor environments. Key features include:
- Obseg zaznavanja: Up to 12 meters with a 180° infrared sensor.
- Adjustable Sensor Head: Can be swiveled vertically by 300° for precise area coverage.
- Adjustable Illumination Duration (TIME): From 10 seconds to 7 minutes.
- Adjustable Ambient Brightness (LUX): Operates between 3 and 2000 lux, allowing for day and night operation settings.
- Združljivo z LED: Podpira LED lamps and other energy-saving bulbs up to 300W, and incandescent bulbs up to 1200W.
- Trajna zasnova: IP44 rated for outdoor use, anthracite color, made of plastic.
Slika 4.1: Konecview of key product features: 12m/180° detection, up to 300W LED, IP44 rating, 10 sec - 7 min duration, 3-2000 LUX sensitivity, 230V operation.
Image 4.2: Dimensions of the motion detector (96mm x 86mm x 60mm) and its 300° vertical swiveling capability.
5. Nastavitev in namestitev
Za pravilno namestitev sledite tem korakom:
- Pripravite se na namestitev: Pred začetkom se prepričajte, da je glavno napajanje območja namestitve izklopljeno z odklopnikom.
- Izberite mesto namestitve: Select a suitable outdoor wall for surface mounting. Consider the desired detection area and avoid locations directly exposed to strong sunlight, heat sources (e.g., vents), or rapidly changing temperatures, which can cause false triggers. The recommended mounting height is 1.8m - 2.5m.
- Montaža podstavka:
- Carefully open the motion detector housing.
- Use the base of the detector as a template to mark the drilling points on the wall.
- Na označenih mestih izvrtajte luknje. Po potrebi vstavite ustrezne zidne vložke.
- Secure the detector's base firmly to the wall using screws.
- Žične povezave: Connect the electrical wires to the terminal block inside the detector. This device requires a 3-wire connection.
- Connect the Live wire (L) from the power supply.
- Connect the Neutral wire (N) from the power supply.
- Connect the Switched Live wire (L') to your light fixture.
Slika 5.1: Primerample wiring diagram. Ensure correct Live (L), Neutral (N), and Switched Live (L') connections.
- Zapri Stanovanja: Carefully close the detector housing, ensuring no wires are pinched.
- Obnovi moč: Ko je namestitev končana in so vse povezave varne, ponovno vzpostavite glavno napajanje.
Image 5.2: The motion detector installed on an exterior wall, demonstrating typical placement.
6. Navodila za uporabo in nastavitve
The motion detector features two adjustable dials for customizing its operation:
Slika 6.1: Bližnji posnetek view of the 'TIME' and 'LUX' adjustment dials on the motion detector.
6.1. TIME Adjustment (Illumination Duration)
The 'TIME' dial controls how long the connected light remains on after motion is detected and no further motion is sensed. The duration can be set from approximately 10 seconds to 7 minutes.
- Turn the dial clockwise (+) for a longer illumination duration.
- Turn the dial counter-clockwise (-) for a shorter illumination duration.
6.2. LUX Adjustment (Ambient Brightness Sensitivity)
The 'LUX' dial determines the ambient light level at which the motion detector will activate. It can be set from 3 lux (dark) to 2000 lux (daylight).
- Obrnite gumb proti ikona sonca for activation in brighter conditions (e.g., during the day).
- Obrnite gumb proti ikona lune for activation only in darker conditions (e.g., at night).
6.3. Adjusting the Sensor Head
The sensor head can be manually swiveled vertically by 300° to fine-tune the detection area. Adjust it to cover the desired zone and avoid areas where unwanted triggers might occur (e.g., public pathways, moving foliage).
Image 6.2: Diagram illustrating the 180° detection range up to 12 meters and the function of TIME and LUX adjustment dials.
7. Vzdrževanje
To ensure optimal performance and longevity of your motion detector:
- Čiščenje: Regularly clean the sensor lens and the outer casinz mehkim, suhim ali rahlo damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the surface or the sensor.
- Pregled: Periodically check the mounting screws for tightness and ensure the housing remains securely closed. Inspect the wiring for any signs of wear or damage.
- Okoljski dejavniki: Keep the detection area clear of obstructions like growing plants or debris that could interfere with the sensor's operation.
8. Odpravljanje težav
If you encounter issues with your motion detector, refer to the following common problems and solutions:
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Luč se ne prižge, ko zazna gibanje. |
|
|
| Luč sveti neprekinjeno ali se vklopi naključno. |
|
|
| Detection range is poor or inconsistent. |
|
|
If the problem persists after attempting these solutions, please contact SEBSON customer support.
9. Specifikacije
| Funkcija | Specifikacija |
|---|---|
| Proizvajalec | SEBSON |
| Številka modela | IR_OUT_BA |
| Mere izdelka (D x Š x V) | 8.6 x 6 x 9.6 cm |
| Teža | 155 gramov |
| barva | antracit |
| Material | Plastika |
| Vir napajanja | AC |
| voltage | 230 volta |
| Max. Power (LED) | 300 vatov |
| Max. Power (Incandescent) | 1200 vatov |
| Način namestitve | Stenska montaža (nadometna montaža) |
| Združljivost tipov žarnic | LED |
| Obseg zaznavanja | 12m / 180° |
| Swiveling Angle | 300° (vertical) |
| Illumination Duration (TIME) | 10 sekund - 7 minut |
| Ambient Brightness (LUX) | 3–2000 luksov |
| Ocena IP | IP44 |
| Priporočene uporabe | Na prostem |
| Zgornja nazivna temperatura | 40 stopinj Celzija |
| Država izvora | Kitajska |
10. Garancija in podpora
Politika vračila: Ta izdelek je upravičen do vračila v 30 dneh od nakupa, v skladu s politiko vračil prodajalca.
Podpora strankam: For technical assistance, troubleshooting, or any questions regarding your SEBSON motion detector, please contact SEBSON customer service directly through your purchase platform. Our team is dedicated to providing support and ensuring product quality.
