Parkside Inspection Camera User Manual

1. Uvod

Thank you for choosing the Parkside Inspection Camera. This device is designed for inspecting difficult-to-reach areas such as drains, cable shafts, and engine compartments. Its flexible gooseneck and integrated camera with adjustable lighting allow for clear visual inspection in confined spaces. Please read this manual thoroughly before operating the device to ensure safe and proper use.

2. Varnostna navodila

• Always ensure the device is switched off before cleaning or performing any maintenance.
• Naprave ne poskušajte razstavljati ali spreminjati. Popravila naj izvaja le usposobljeno osebje.
• The camera head and flexible gooseneck are protected against temporary immersion (IP67). Do not submerge the main unit.
• Napravo hranite stran od ekstremnih temperatur, neposredne sončne svetlobe in vlage.
• Use only the specified batteries (4x AA) and dispose of them properly.
• Hraniti izven dosega otrok.

3. Vsebina paketa

Prosimo, preverite, ali so vsi predmeti prisotni in v dobrem stanju:

• Parkside Inspection Camera (Main Unit with integrated display)
• Flexible Gooseneck Camera Probe
• 1 x Hook Attachment
• 1 x Double Hook Attachment
• 1 x Magnet Attachment
• 1 x Mirror Attachment
• 1 x USB Cable (approx. 90 cm)
• 4 x alkalne baterije AA
• Plastična torbica
• Uporabniški priročnik

4. Izdelek je končanview

Figure 4.1: Parkside Inspection Camera showing the main unit and flexible probe.

The Parkside Inspection Camera consists of a main handheld unit with an integrated 2.7-inch TFT-LCD display and a flexible gooseneck probe with an 8mm camera head. The camera head features adjustable lighting for optimal visibility in dark environments. The main unit includes controls for brightness, image rotation, and a micro-USB port for data transfer. It also has an integrated flash memory for storing up to 100 photos (640 x 480 px).

5. Nastavitev

5.1. Namestitev baterije

1. Poiščite predal za baterije na zadnji strani glavne enote.
2. Odprite pokrov prostora za baterije.
3. Insert 4 x AA alkaline batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
4. Trdno zaprite pokrov prostora za baterije.

5.2. Pritrditev dodatne opreme

The inspection camera comes with four attachments (hook, double hook, magnet, mirror) that can be screwed onto the camera head for specific tasks. To attach an accessory:

1. Gently screw the desired attachment onto the threaded tip of the camera head until it is secure. Do not overtighten.
2. Ensure the attachment is firmly in place before use to prevent it from detaching during inspection.

6. Upravljanje naprave

Figure 6.1: Using the inspection camera to view an engine compartment.

6.1. Vklop/izklop

• Press and hold the Power button to turn the device on. The display will illuminate.
• To turn off, press and hold the Power button again.
• The device features a battery-friendly automatic shutdown function after approximately 20 minutes of inactivity.

6.2. Adjusting Display and Camera Lighting

• Use the brightness control buttons on the main unit to adjust the display's illumination for better viewing.
• The camera head's lighting can also be adjusted to illuminate the inspection area. Refer to the controls on the main unit for this function.

6.3. Image Rotation

The display image can be rotated 180° for convenient viewing, regardless of the camera's orientation. Use the designated button on the main unit to rotate the image.

6.4. Zajemanje fotografij

The device has an integrated flash memory for storing still images. To capture a photo:

1. Position the camera to capture the desired view.
2. Press the Photo capture button (usually indicated by a camera icon) on the main unit. The image will be saved to the internal memory.

6.5. Prenos podatkov

To transfer captured images to a computer:

1. Connect the inspection camera to your computer using the supplied micro-USB cable.
2. Naprava bi se morala v računalniku prikazati kot izmenljiva pomnilniška naprava.
3. Navigate to the device's storage and copy the JPEG image files na vaš računalnik.

7. Vzdrževanje

7.1. Čiščenje

• Wipe the main unit and display with a soft, dry cloth.
• For the camera lens, use a soft, lint-free cloth, possibly slightly dampened with lens cleaner, to avoid scratching.
• Pred shranjevanjem se prepričajte, da je naprava popolnoma suha.

7.2. Shranjevanje

When not in use, store the inspection camera in its plastic carrying case in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for an extended period, remove the batteries to prevent leakage.

8. Odpravljanje težav

If you encounter issues with your Parkside Inspection Camera, please refer to the following common solutions:

9. Specifikacije

10. Garancija in podpora

Specific warranty information for this product is not available in this manual. Please refer to the product packaging, purchase documentation, or the manufacturer's official website for details regarding warranty coverage and customer support. For technical assistance or inquiries, please contact Parkside customer service through their official channels.