Uvod
Thank you for choosing the AutoCraft Silicone Coated Vibration Resistant Rough Service Shop Light Bulb. This incandescent bulb is engineered for durability and reliability in demanding environments such as workshops and garages. With its silicone coating and robust construction, it is designed to withstand vibrations and provide consistent illumination for up to 5,000 hours.
This manual provides essential information for the safe and effective use of your new light bulb. Please read it thoroughly before installation and retain it for future reference.
Varnostne informacije
Vedno upoštevajte naslednje varnostne ukrepe, da preprečite poškodbe ali škodo:
- Ensure power is turned off at the switch or circuit breaker before installing or removing the bulb.
- Ne prekoračite največje wattage rating of your light fixture. This bulb is 40 Watts.
- Allow the bulb to cool completely before handling, as incandescent bulbs generate heat during operation.
- Do not use this bulb with dimmer switches, as it is not dimmable.
- Ta žarnica je zasnovana samo za uporabo v zaprtih prostorih.
- Handle the bulb by its base to avoid damaging the glass or silicone coating.
- Dispose of broken bulbs safely according to local regulations.
Nastavitev
The AutoCraft Rough Service Shop Light Bulb is designed for simple installation into standard E26 medium base sockets.
- Odpakirajte žarnico: Carefully remove the bulb from its packaging. Inspect it for any visible damage.
- Pripravite pritrditev: Ensure the light fixture is turned off and cool to the touch. If replacing an old bulb, unscrew it counter-clockwise.
- Namestite novo žarnico: Gently screw the AutoCraft bulb clockwise into the E26 medium base socket until it is snug. Do not overtighten.
Figure 1: The AutoCraft Silicone Coated Vibration Resistant Rough Service Shop Light Bulb, showing its frosted glass and brass-type base.
Figure 2: The AutoCraft Silicone Coated Vibration Resistant Rough Service Light Bulb in its retail packaging, highlighting key features like wattage and lumens.
Navodila za uporabo
Once installed, operating the AutoCraft light bulb is straightforward:
- Vklop: Turn on the power switch connected to the light fixture. The bulb will illuminate instantly.
- Ugasniti: Turn off the power switch to extinguish the light.
- Proizvodnja toplote: As an incandescent bulb, it will generate heat during operation. Ensure adequate ventilation around the fixture.
Vzdrževanje
The AutoCraft light bulb requires minimal maintenance due to its durable design. However, following these tips can help prolong its life and maintain performance:
- Čiščenje: If the bulb becomes dusty, turn off the power and allow it to cool. Wipe gently with a soft, dry cloth. Do not use liquid cleaners.
- Pregled: Periodically check the bulb and fixture for any signs of wear or damage. Replace the bulb if the glass is cracked or the base is corroded.
- Vibration Environments: While designed to be vibration resistant, extreme or continuous heavy vibrations may still affect lifespan. Ensure the fixture is securely mounted.
Odpravljanje težav
If you encounter issues with your AutoCraft light bulb, consider the following:
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Žarnica ne sveti. | No power to the fixture, loose bulb, or burned-out filament. | Check power switch/circuit breaker. Tighten bulb in socket. Replace bulb if necessary. |
| Žarnica utripa. | Loose connection, incompatible dimmer, or unstable power supply. | Ensure bulb is tightly screwed in. Do not use with dimmers. Check household wiring if problem persists. |
| Žarnica hitro pregori. | Prekomerna voltage, frequent on/off cycling, or extreme vibrations. | Preverite voltage supply is 120 VAC. Reduce frequency of switching if possible. Ensure fixture is stable in high-vibration areas. |
Specifikacije
| Funkcija | Podrobnost |
|---|---|
| Znamka | AGS |
| Številka modela | AC300A |
| Vrsta svetlobe | Žarnica z žarilno nitko |
| Wattage | 40 vatov |
| voltage | 120 voltov (AC) |
| Svetlost | 250 lumnov |
| Povprečno življenje | 5,000 ur |
| Velikost oblike žarnice | A19 |
| Podnožje žarnice | E26 Srednje |
| Posebne lastnosti | Silicone Coated, Shock and Vibration Resistant, Not Dimmable, Shatter Resistant |
| Notranja/zunanja uporaba | Notranja |
| Material | Glass (with silicone coating) |
| Dimenzije izdelka | 2.38 x 2.38 x 4.13 palcev |
| Teža predmeta | 1.44 unč |
| Država izvora | Kitajska |
Garancija in podpora
For warranty information or technical support, please contact AGS customer service. Refer to the product packaging for specific contact details or visit the official AGS webmesto.
AGS Automotive Solutions
Webspletno mesto: AGS Store on Amazon