HCDZ DJ96-00201C

HCDZ Replacement Remote Control Instruction Manual

For Samsung Powerbot Robot Vacuums (Model DJ96-00201C)

Uvod

This manual provides essential instructions for the setup, operation, and maintenance of your HCDZ Replacement Remote Control. This remote is designed to be compatible with various Samsung Powerbot Robot Vacuum models, including VR2AM7065WS, VR1AM7040WG/A, VR1AM7010U, SR1AM7010UW, VR2AM7090W, SR10M7010UB, SR10M7030WW, VR2AM7070WS, VR2AM7070WS/AA, and R7070. Please read this manual thoroughly before use to ensure proper functionality and longevity of your device.

Nastavitev

The HCDZ Replacement Remote Control requires two AAA batteries (not included) for operation. No programming is needed; the remote will function immediately upon battery insertion.

  1. Odprite predal za baterije: Locate the battery compartment cover on the back of the remote control. Gently slide or lift the cover to open it.
  2. Vstavite baterije: Insert two new AAA batteries into the compartment, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
  3. Zaprite prostor za baterije: Namestite pokrov predalčka za baterije in se prepričajte, da se varno zaskoči.
Back of the HCDZ remote control with the battery compartment cover closed.
Figure 1: Back of the remote control with the battery compartment closed.

Ta slika prikazuje zadnji del view of the HCDZ replacement remote control, highlighting the battery compartment cover in its closed position. The design is sleek and ergonomic.

Back of the HCDZ remote control with the battery compartment open, showing two AAA battery slots.
Figure 2: Back of the remote control with the battery compartment open.

This image displays the back of the HCDZ replacement remote control with the battery compartment cover removed, revealing the two slots for AAA batteries. The internal contacts are visible, indicating proper battery orientation.

Navodila za uporabo

Once batteries are correctly installed, your HCDZ Replacement Remote Control is ready for immediate use with your compatible Samsung Powerbot Robot Vacuum. Point the remote directly at the robot vacuum and press the desired function button.

  • Vklop/izklop: Use the power button to turn the robot vacuum on or off.
  • Začetek/Premor čiščenja: Zaženite ali začasno ustavite cikle čiščenja.
  • Smerni nadzor: Guide the robot vacuum manually using the directional arrow buttons.
  • Izbira načina: Select different cleaning modes (e.g., Auto, Spot, Manual).
  • Home/Recharge: Send the robot vacuum back to its charging station.

Refer to your Samsung Powerbot Robot Vacuum's original manual for specific functions of each button, as this remote replicates the original functionality.

Vzdrževanje in nega

Za zagotovitev dolge življenjske dobe in optimalnega delovanja daljinskega upravljalnika upoštevajte ta navodila:

  • Zamenjava baterije: Replace both AAA batteries when the remote's response becomes sluggish or stops working. Do not mix new batteries with old ones.
  • Shranjevanje: If the remote will not be used for an extended period, remove the batteries to prevent potential damage from leakage and corrosion.
  • Okoljski pogoji: Avoid exposing the remote to extremely hot or humid environments. Direct sunlight or strong lighting apparatuses can interfere with the remote sensor and cause malfunctions.
  • Čiščenje: Daljinski upravljalnik obrišite z mehko, suho krpo. Ne uporabljajte tekočih čistil ali abrazivnih materialov.

Odpravljanje težav

TežavaMožen vzrokrešitev
Remote is not working.
  • Baterije so prazne ali nepravilno vstavljene.
  • Obstruction between remote and robot vacuum.
  • Remote sensor exposed to strong light.
  • Baterije zamenjajte z novimi in pri tem pazite na pravilno polarnost.
  • Remove any objects blocking the line of sight between the remote and the robot vacuum.
  • Move to an area away from direct sunlight or strong artificial light sources.
Gumbi se ne odzivajo.
  • Nizka moč baterije.
  • Remote sensor interference.
  • Zamenjajte baterije.
  • Ensure no strong light sources are interfering with the remote's sensor.

Specifikacije

  • Znamka: HCDZ
  • Številka modela: DJ96-00201C
  • Tehnologija povezljivosti: Infrardeči (IR)
  • Vrsta regulatorja: Nadzor gumbov
  • Največje število podprtih naprav: 1
  • Potrebne baterije: 2 x AAA (niso vključeni)
  • Posebna lastnost: No programming needed, works out of the package.

Garancija in podpora

This HCDZ Replacement Remote Control is designed for reliable performance. For any issues not covered in the troubleshooting section, please refer to the retailer's return policy or contact HCDZ customer support through their official channels. Please note that specific warranty details may vary by retailer and region.

Za dodatno pomoč lahko obiščete HCDZ Store on Amazon.

Povezani dokumenti - DJ96-00201C

Prejview NEONIX DJ96-00193F Lithium-ion Battery Safety Data Sheet
Comprehensive Safety Data Sheet for the NEONIX DJ96-00193F Lithium-ion battery, detailing identification, hazards, composition, handling, storage, and regulatory information.