Uporabniški priročnik za vgrajeni digitalni časovnik Sygonix SY-4504968

1. Uvod

The Sygonix SY-4504968 Digital Timer is designed for automated control of electrical devices, such as lighting, in homes or offices. This versatile timer offers 15 programmable configurations, including weekly settings, allowing for up to 20 switching times per day, totaling 140 switching points per week. It features automatic summer and winter time adjustment, a countdown function, and a random mode. The timer supports both flush and surface mounting.

Please read this manual thoroughly before installation and operation to ensure correct usage and to prevent damage.

Slika 1: Spredaj view of the Sygonix SY-4504968 Digital Built-in Timer, showing the digital display and the main power button.

2. Varnostna navodila

• Namestitev mora opraviti usposobljen električar v skladu z lokalnimi električnimi predpisi in predpisi.
• Ensure the power supply is disconnected before installation, maintenance, or any wiring work.
• The device requires a neutral wire for operation. Verify its presence in your electrical box.
• Do not exceed the maximum load capacity of 1800 W.
• Naprave ne izpostavljajte vlagi, ekstremnim temperaturam ali neposredni sončni svetlobi.
• Naprave ne poskušajte razstavljati ali spreminjati. Vsa servisna dela prepustite usposobljenemu osebju.

3. Vsebina paketa

Preverite, ali so v paketu prisotni vsi elementi:

• Sygonix SY-4504968 Digital Built-in Timer
• Surface mount frame
• Montažni vijaki in stenski vložki
• Navodila za uporabo

4. Izdelek je končanview

The timer features a digital display and control buttons located behind a protective cover.

Slika 2: Od blizu view of the timer's digital display, showing time, day (TU for Tuesday), and 'PROG' and 'ON' indicators.

Slika 3: The timer with its protective cover open, revealing the control buttons for programming and settings.

4.1. Indikatorji zaslona

• Prikaz časa: Prikazuje trenutni čas v formatu HH:MM.
• Indikator dneva: Displays the current day of the week (e.g., MO, TU, WE).
• PROG.: Indicates that a program is active or being set.
• VKLOP/IZKLOP: Indicates the current switching state of the connected device.

4.2. Control Buttons (behind cover)

• Clock/Set Button: Used to set the current time and day.
• Gumb PROG: Vstopi v način nastavitve programa.
• RND (Random) Button: Activates/deactivates random switching mode.
• CD (Countdown) Button: Activates/deactivates countdown function.
• Gumbi +/-: Used to adjust values (time, program settings).
• R (Reset) Button: Resets the timer to factory defaults.

5. Namestitev

The timer can be installed either flush-mounted into a wall box or surface-mounted using the provided frame.

5.1. Shema ožičenja

Pomembno: Ensure the main power supply is switched off before proceeding with any wiring. This device requires a neutral wire connection.

Connect the Live (L), Neutral (N), and Switched Live (L') wires according to the diagram provided with the product. The neutral wire is essential for the timer's internal clock and display to function.

5.2. Podometna montaža

1. Prepare a standard wall box (minimum depth of 50mm recommended for easier wiring).
2. Connect the electrical wires to the terminals on the back of the timer as per the wiring diagram.
3. Carefully push the timer into the wall box, ensuring wires are not pinched.
4. Časovnik pritrdite na stensko škatlo s priloženimi vijaki.
5. Attach the front cover plate.

Slika 4: The digital timer flush-mounted into a wall, blending with the room's decor.

5.3. Površinska montaža

1. Attach the surface mount frame to the wall using the provided screws and wall plugs.
2. Connect the electrical wires to the terminals on the back of the timer.
3. Insert the timer into the surface mount frame, ensuring a secure fit.
4. Attach the front cover plate.

Slika 5: Stran view of the timer, illustrating its depth for installation considerations.

6. Nastavitev

6.1. Začetni vklop in ponastavitev

After installation and restoring power, the display will light up. If the display is erratic or shows incorrect values, press the R (Reset) button with a pointed object (e.g., a pen tip) to clear all settings and restore factory defaults.

6.2. Nastavitev trenutnega časa in dneva

1. Open the protective cover to access the control buttons.
2. Pritisnite in držite Clock/Set button for approximately 3 seconds until the time display flashes.
3. Uporabite +/- gumbe za nastavitev ure. Pritisnite Clock/Set ponovno za potrditev in premik na minute.
4. Uporabite +/- gumbe za nastavitev minut. Pritisnite Clock/Set again to confirm and move to day.
5. Uporabite +/- buttons to select the current day of the week (MO, TU, WE, TH, FR, SA, SU).
6. Pritisnite Clock/Set one last time to save the settings and exit the time setting mode.

6.3. Automatic Summer/Winter Time Adjustment

The timer is equipped with an automatic summer/winter time adjustment feature. This function typically activates automatically based on pre-programmed dates. No manual intervention is usually required for this feature.

7. Delovanje

7.1. Programiranje tedenskih urnikov

The timer allows for up to 15 different program configurations, with 20 switching times per day, totaling 140 switching points per week.

1. Pritisnite PROG button to enter program setting mode. The display will show '1 ON' (for program 1, switch-on time).
2. Uporabite +/- buttons to set the desired switch-on hour. Press PROG za potrditev in premik na minute.
3. Uporabite +/- buttons to set the desired switch-on minutes. Press PROG to confirm and move to day selection.
4. Uporabite +/- buttons to select the day(s) for this program. You can choose individual days, blocks of days (e.g., MO-FR), or all days. Press PROG za potrditev.
5. The display will now show '1 OFF' (for program 1, switch-off time). Repeat steps 2-4 to set the switch-off time and day(s) for this program.
6. After setting the 'OFF' time, press PROG again to move to the next program ('2 ON') or to exit program setting mode if no more programs are needed.
7. To exit program mode at any time, press the Clock/Set gumb.

7.2. Funkcija odštevanja

The countdown function allows you to set a specific duration after which the connected device will switch ON or OFF.

1. Pritisnite CD (Countdown) button. The display will show 'CD' and a default countdown time.
2. Uporabite +/- buttons to adjust the desired countdown duration (hours and minutes).
3. Pritisnite CD again to start the countdown. The device will switch its state (ON to OFF, or OFF to ON) once the countdown finishes.
4. Za preklic odštevanja pritisnite CD button again during the countdown.

7.3. Random Mode

The random mode switches the connected device ON and OFF at irregular intervals, simulating presence for security purposes.

1. Pritisnite RND (Random) button. The display will show 'RND'.
2. The timer will now activate and deactivate the connected device at random times within a predefined period (e.g., 30 minutes to 2 hours).
3. To deactivate random mode, press the RND button again. The 'RND' indicator will disappear.

8. Vzdrževanje

• Napravo očistite z mehko, suho krpo. Ne uporabljajte abrazivnih čistil ali topil.
• The internal battery (if present for memory backup) is typically long-lasting and not user-replaceable. If the timer loses settings during power outages, the battery may need professional replacement.

9. Odpravljanje težav

10. Specifikacije

• Model: SY-4504968
• Proizvajalec: Sygonix
• voltage: 230 volta
• Maks. obremenitev: 1800 W
• Mere izdelka (D x Š x V): 12 x 9 x 8 cm
• Teža: 230 gramov
• Vrsta zaslona: Digitalno
• Število programov: 15
• Switching Points: Up to 140 per week (20 per day)
• Potrebne baterije: Yes (for internal clock/memory backup, typically not user-replaceable)

11. Garancija in podpora

Sygonix products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your purchase or visit the official Sygonix website. For technical support, troubleshooting assistance, or spare parts, please contact your retailer or the Sygonix customer service department.