1. Uvod
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Clarke EX20 100H Carpet Extractor. Please read this manual thoroughly before operating the machine to ensure proper use and to prevent injury or damage.
Figure 1: The Clarke EX20 100H Carpet Extractor, a powerful machine designed for deep carpet cleaning.
2. Varnostne informacije
Vedno upoštevajte naslednje varnostne ukrepe, da zmanjšate tveganje požara, električnega udara ali poškodb.
- Preberite vsa navodila: Familiarize yourself with the machine's operation before use.
- Električna varnost: Ensure the power cord and plug are in good condition. Do not operate with a damaged cord or plug. Connect to a properly grounded outlet only.
- Kemikalije: Use only recommended cleaning solutions. Follow manufacturer's instructions for chemical handling and disposal.
- Prezračevanje: Delajte v dobro prezračenem prostoru.
- Osebna zaščitna oprema (PPE): Wear appropriate PPE, such as gloves and eye protection, when handling cleaning solutions or operating the machine.
- Nadzor: Ne dovolite otrokom ali neusposobljenemu osebju, da upravljajo stroj.
- Shranjevanje: Store the machine in a dry, secure location away from extreme temperatures.
- Vzdrževanje: Pred kakršnim koli vzdrževanjem ali čiščenjem izklopite napajanje.
3. Nastavitev
Follow these steps to prepare your Clarke EX20 100H for operation:
- Unpack the Extractor: Previdno vzemite enoto iz embalaže. Preverite, ali je med pošiljanjem prišlo do morebitnih poškodb.
- Sestavite ročaj: Attach the handle assembly to the main unit. Ensure all fasteners are securely tightened.
- Napolnite rezervoar za raztopino: Open the solution tank cap. Fill the tank with the appropriate carpet cleaning solution mixed according to the solution manufacturer's instructions. Do not overfill.
- Povežite cevi: Connect the vacuum hose and solution hose to the appropriate ports on the machine and the cleaning wand. Ensure connections are secure to prevent leaks.
- Plug In: Priključite napajalni kabel v ozemljeno električno vtičnico.
Figure 2: Accessing the internal components and tanks of the Clarke EX20 100H by lifting the top cover.
4. Navodila za uporabo
Once the unit is set up, follow these steps for effective carpet extraction:
- Predvakuum: Pred sesanjem temeljito posesajte preprogo, da odstranite umazanijo in ostanke.
- Vklopi napajanje: Locate the control panel on the machine. Turn on the vacuum and pump switches. The Clarke EX20 100H operates at 100 PSI.
- Začnite s čiščenjem: With the cleaning wand, make slow, overlapping passes over the carpet. Depress the solution trigger to apply cleaning solution while pulling the wand towards you to extract the dirty water.
- Prazen rezervoar za zbiranje: When the recovery tank is full (indicated by a decrease in vacuum suction or a float shut-off), turn off the machine, disconnect the wand, and empty the dirty water into a suitable drain.
- Rezervoar za raztopino za ponovno polnjenje: Refill the solution tank as needed.
- Izpiranje (neobvezno): For heavily soiled carpets or to remove detergent residue, you may perform a rinse pass using only clean water in the solution tank.
- Naknadno čiščenje: Allow the carpet to dry completely before allowing foot traffic. Use fans or open windows to aid drying.
Figure 3: The control panel features clearly labeled switches for activating the spray, vacuum, and heating functions.
5. Vzdrževanje
Redno vzdrževanje zagotavlja dolgo življenjsko dobo in optimalno delovanje vašega ekstraktorja.
- Po vsaki uporabi:
- Empty and rinse both the solution and recovery tanks with clean water.
- Clean the recovery tank filter to prevent clogs.
- Rinse the cleaning wand and hoses.
- Obrišite zunanjost stroja z oglasomamp krpo.
- Mesečno:
- Inspect hoses and connections for wear or damage. Replace if necessary.
- Preverite stanje napajalnega kabla in vtiča.
- Clean the spray jets on the wand to ensure even solution distribution.
- Shranjevanje: Store the machine in a dry, climate-controlled environment. Do not store with water in the tanks.
6. Odpravljanje težav
Za pogoste težave in njihove rešitve glejte spodnjo tabelo.
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Brez sesanja | Recovery tank full; Clogged vacuum hose/filter; Loose hose connection; Damaged vacuum motor. | Empty recovery tank; Clean hose/filter; Secure connections; Contact service. |
| Brez pršila | Solution tank empty; Clogged spray jet; Pump not on; Damaged pump. | Refill solution tank; Clean spray jet; Turn on pump switch; Contact service. |
| Stroj se ne vklopi | No power to outlet; Power cord damaged; Internal electrical issue. | Check outlet/breaker; Inspect cord (replace if damaged); Contact service. |
| Puščanje vode | Loose hose connections; Damaged seals/gaskets; Cracked tank. | Tighten connections; Inspect and replace seals; Contact service. |
7. Specifikacije
Key technical specifications for the Clarke EX20 100H Carpet Extractor:
| Funkcija | Podrobnost |
|---|---|
| Vrsta izdelka | Janitorial Supply |
| Dimenzije paketa | 52 x 45 x 28 palca; 87 funtov |
| Država izvora | Mehika |
| Teža paketa | 87.0 funt |
| Številka modela artikla | EX20 100H |
| Prvič na voljo | 6. oktober 2020 |
| Proizvajalec | Nilfisk, Inc. |
| ASIN | B08KSF87MX |
| Znamka | Clarke |
| Slog | Moderno |
| UPC | 706155019187 |
8. Kaj je v škatli
The following items are included with your Clarke EX20 100H Carpet Extractor:
- Enota za odstranjevanje preprog
9. Garancija in podpora
For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or contact Clarke customer service. Keep your purchase receipt as proof of purchase for warranty claims.
For further assistance, you may visit the official Clarke webspletnega mesta ali se obrnite na pooblaščenega prodajalca.
