1. Uvod
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Antminer S19 Pro 110TH/s Bitcoin Miner. Designed for high-performance cryptocurrency mining, this unit is optimized with Braiins OS+ firmware to deliver enhanced hash power and energy efficiency. Please read this manual thoroughly before operating the device to ensure proper functionality and safety.
2. Varnostne informacije
Always adhere to the following safety guidelines to prevent damage to the unit, personal injury, or property damage:
- voltage Zahteva: This unit requires a 240 V power supply. It will not operate on 110V. Using incorrect voltage may prevent startup or cause severe damage to the unit.
- Prezračevanje: Zagotovite zadosten pretok zraka okoli rudarja, da preprečite pregrevanje. Ne blokirajte prezračevalnih odprtin.
- Okolje: Operate the miner in a clean, dry, and temperature-controlled environment. Avoid excessive dust, humidity, and extreme temperatures.
- Napajalni priključek: Use only the provided power cables and ensure they are securely connected. Do not overload electrical circuits.
- Ravnanje: Z enoto ravnajte previdno. Pazite, da vam ne pade ali da je ne izpostavljate močnim udarcem.
3. Izdelek je končanview
The Antminer S19 Pro 110TH/s is a robust Bitcoin mining device featuring advanced cooling and a powerful hash board. Key components include the control board, hash boards, and cooling fans.
Ključne značilnosti:
- Boosted to 120TH with Braiins Firmware: Optimized with Braiins OS+ to increase performance from 110TH to 120TH for maximum mining efficiency.
- Lower Power Consumption, Higher Profitability: Thanks to Braiins firmware, this miner uses less electricity while delivering more hash rate, reducing operational costs and increasing ROI.
- Tested, Cleaned, and Ready to Run: Each unit is carefully tested, cleaned, and delivered ready for deployment.
Identifikacija komponente:
Slika 3.1: Spredaj levo view of the Antminer S19 Pro, showing the main casing and two large cooling fans on the side.
Slika 3.2: Zadaj view of the Antminer S19 Pro, highlighting the power input ports and smaller exhaust fans.
Slika 3.3: Zgornji del view of the Antminer S19 Pro, showing the network port, SD card slot, and status indicator lights.
4. Navodila za nastavitev
Follow these steps to set up your Antminer S19 Pro:
- Razpakiranje: Carefully remove the miner from its packaging. Inspect for any visible damage.
- Umestitev: Place the miner on a stable, flat surface in a well-ventilated area. Ensure at least 20 cm of clear space around all sides for optimal airflow.
- Napajalni priključek: Connect the 240V power cables to the miner's power input ports. Ensure the power source is capable of providing the required wattage (3250 W).
- Omrežna povezava: Connect an Ethernet cable from your router or network switch to the miner's Ethernet port.
- Začetni vklop: Once all connections are secure, power on the unit. The miner will perform a self-check.
5. Navodila za uporabo
After initial setup, configure your miner for operation:
- Dostop do Web Vmesnik: Locate the miner's IP address using an IP scanner tool on your network. Enter this IP address into a web browser to access the miner's control panel.
- Prijava: Enter the default username and password (refer to the miner's documentation or common Antminer defaults if not provided).
- Konfiguracija bazena: Navigate to the 'Miner Configuration' or 'Pool Settings' section. Enter your mining pool URL, worker name, and password.
- Shrani in uporabi: Save the settings and apply them. The miner will restart its hashing process with the new configuration.
- Spremljanje: Monitor the miner's status, hash rate, and temperature through the web interface to ensure stable operation.
6. Vzdrževanje
Regular maintenance ensures the longevity and optimal performance of your Antminer S19 Pro:
- Odstranjevanje prahu: Periodically clean dust from the fans and heat sinks using compressed air. Ensure the miner is powered off and unplugged before cleaning.
- Pregled ventilatorja: Check cooling fans for any obstructions or signs of wear. Replace damaged fans promptly.
- Posodobitve vdelane programske opreme: Check the official Antminer or Braiins OS+ website for firmware updates. Apply updates as recommended to improve performance and security.
- Okoljski nadzor: Maintain a stable operating environment with appropriate temperature and humidity levels.
7. Odpravljanje težav
Pogoste težave in njihove rešitve:
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Rudar se ne vklopi. | Nepravilna voltage (110V instead of 240V), loose power cables, power supply failure. | Verify 240V power supply. Check all power cable connections. Test power supply if possible. |
| No hash rate/Low hash rate. | Incorrect pool settings, network issues, faulty hash board, overheating. | Verify pool configuration. Check network connectivity. Ensure proper ventilation. Inspect hash boards. |
| Miner offline. | Network cable disconnected, router issue, incorrect IP address. | Check Ethernet cable. Restart router/switch. Verify miner's IP address. |
| Pregrevanje. | Blocked airflow, dusty fans, high ambient temperature. | Clear obstructions. Clean fans. Improve room ventilation or cooling. |
Če težave ne odpravite, se obrnite na podporo strankam.
8. Specifikacije
Detailed technical specifications for the Antminer S19 Pro 110TH/s:
| Atribut | Vrednost |
|---|---|
| Ime modela | S19 Pro 110Th/s |
| Znamka | Rudar mravelj |
| Mere izdelka (D x Š x V) | 15 x 8 x 11 palcev |
| Teža predmeta | 36 funtov |
| Izhodna vattage | 3200 vatov |
| Wattage | 3250 vatov |
| Metoda hlajenja | zrak |
| Združljive naprave | Osebni računalnik |
| Vrsta priključka | ATX |
| Oblikovanje napajalnika | Popolna modularna |
| Proizvajalec | QIO TECH |
9. Garancija in podpora
This product is covered under the manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or contact the manufacturer directly.
Important Notice Regarding Returns:
ALL SALES ARE FINAL! If any returns are accepted, a 50% restocking fee will be charged. This policy is in place due to Bitcoin market volatility and potential misuse. Please purchase responsibly.
Podpora strankam:
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact your vendor or the manufacturer, QIO TECH. Ensure you have your product model number (S19 Pro 110Th/s) and purchase details ready when contacting support.
