Konec izdelkaview
The B'laster 16-PB-DS ProStraw is a powerful rust penetrating catalyst and lubricant designed to quickly loosen rusted or frozen parts. Its advanced formula not only breaks down rust and corrosion but also provides a non-evaporating lubricant that protects against future rust and weathering, saving time and equipment.
Opis slike: A white aerosol can of B'laster Penetrating Catalyst with a yellow cap and a flexible straw attachment. The label highlights "Powerful Rust Penetrating Catalyst" and "Breaks Loose Faster," along with key features like 360° valve and protection against rust.
Ključne značilnosti:
- ProStraw Design: Features an innovative, patented dual-spray pattern and volume adjuster for precise application control.
- 360° Valve: Allows the product to spray effectively even when the can is held upside-down.
- Rust Penetration: Quickly breaks free rusted or frozen parts.
- Zaščita pred korozijo: Protects against further rust and weathering.
- Capillary Action: Attacks rust from all angles using unique capillary action.
- Vsestranska uporaba: Suitable for automotive, industrial, marine, and plumbing equipment.
Varnostne informacije
NEVARNOST:
- VNETLJIV.
- VAPOR HARMFUL. EXCESSIVE INHALATION MAY BE FATAL.
- MAY CAUSE EYE AND SKIN IRRITATION.
- MAY BE HARMFUL OR FATAL IF SWALLOWED.
- VSEBINA POD TLAKOM.
Always read and follow all cautions and instructions on the product label before use. Use in a well-ventilated area. Keep out of reach of children. Wear appropriate personal protective equipment, including eye protection and gloves.
Nastavitev in priprava
- Preberite navodila: Carefully read all instructions and safety warnings on the product label and in this manual before use.
- Prezračevanje: Ensure the work area is well-ventilated. If working indoors, open windows and doors or use exhaust fans.
- Osebna zaščitna oprema (PPE): Wear safety glasses or goggles to protect eyes from splashes and vapors. Wear chemical-resistant gloves to protect skin.
- Priprava površine: For best results, clean the area around the rusted or frozen part of any loose dirt or debris.
- Stresite pločevinko: Shake the can thoroughly for several seconds before each use to ensure proper mixing of the contents.
- Attach ProStraw: Insert the ProStraw into the nozzle for precise application, or use the wide spray pattern directly from the nozzle for broader coverage.
Navodila za uporabo
- Target Application: Direct the spray nozzle or ProStraw directly onto the rusted or frozen component.
- Apply Liberally: Apply a generous amount of B'laster Penetrating Catalyst to the affected area, ensuring it saturates the rust and penetrates into threads or joints.
- Allow Penetration: Allow the product to penetrate for several minutes. For heavily rusted parts, allow more time, such as 15-30 minutes, or even overnight for extreme cases. The unique capillary action helps the product seep into tight spaces.
- Reapply if Necessary: For stubborn parts, reapply the product and allow additional penetration time.
- Attempt to Loosen: After sufficient penetration time, attempt to loosen the part using appropriate tools. Apply steady, increasing-tlak.
- Čiščenje: Wipe away any excess product with a clean cloth.
Nasveti za najboljše rezultate:
- For extremely seized parts, tapping the part gently with a hammer after application can help the penetrant work deeper.
- The 360° valve allows for spraying from any angle, including upside-down, which is useful in confined or awkward spaces.
- Use the volume adjuster on the ProStraw to control the flow for either a fine stream or a broader spray.
Vzdrževanje in skladiščenje
- Nega šob: After use, if the nozzle becomes clogged, remove it and clean with a thin wire or solvent. Reattach securely.
- Shranjevanje: Store the can in a cool, dry place away from direct sunlight, heat sources, and open flames.
- Temperatura: Do not expose to temperatures exceeding 120°F (49°C).
- Hraniti izven dosega otrok: Store in an area inaccessible to children and pets.
- Odstranjevanje: Prazne pločevinke zavrzite v skladu z lokalnimi predpisi. Ne preluknjajte ali sežigajte.
Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Part does not loosen after application. | Severe rust/corrosion; insufficient penetration time; improper application. | Reapply product liberally and allow significantly more penetration time (e.g., several hours or overnight). Gently tap the part to aid penetration. Consider using heat if safe and appropriate for the material. |
| Nozzle is clogged or spray is weak. | Dried product in nozzle; straw not properly attached. | Remove and clean the nozzle with a thin wire or solvent. Ensure the ProStraw is fully inserted and not bent. Shake the can well before use. |
| Product leaks from nozzle area. | Nozzle not securely attached; damaged nozzle. | Ensure the nozzle is firmly pressed onto the valve stem. If damaged, replace the can or contact customer support. |
Specifikacije
| Atribut | Podrobnost |
|---|---|
| Številka modela | 16-PB-DS |
| Znamka | Blaster |
| Dimenzije izdelka | 8.25 x 12 x 8.5 inches (packaging for pack of 12) |
| Volumen tekočine | 11 ounces per can |
| Teža predmeta | 14.4 ounces per can |
| Material | Metal (can) |
| Proizvajalec | Blaster Corporation |
| Prvič na voljo | 7. september 2020 |
Garancija in podpora
For specific warranty information or technical support regarding your B'laster product, please refer to the official B'laster webspletno mesto ali se obrnite neposredno na njihovo službo za stranke.
Proizvajalec: Blaster Corporation
Webspletno mesto: www.blasterproducts.com (This is a general link, specific product support might be found there)
Always ensure you are using genuine B'laster products for optimal performance and safety.
