Wiltec 500 kg Hydraulic Workshop Crane Instruction Manual

1. Varnostne informacije

Read and understand all safety warnings and instructions before operating this hydraulic workshop crane. Failure to follow these instructions may result in serious injury or property damage.

• Največja nosilnost: Do not exceed the maximum load capacity of 500 kg. Refer to the boom extension settings for corresponding load limits.
• Stabilna površina: Always operate the crane on a flat, level, and stable surface.
• Osebna zaščitna oprema: Nosite ustrezno varnostno opremo, vključno z zaščitnimi očali in rokavicami.
• Odstranitev: Ensure adequate clearance around the crane and the load during lifting and moving operations. Keep bystanders away from the work area.
• Preglejte pred uporabo: Pred vsako uporabo preverite, ali je žerjav poškodovan, obrabljen ali ima zrahljane komponente. Ne uporabljajte ga, če je poškodovan.
• Varno nalaganje: Always ensure the load is properly secured and balanced before lifting. Use appropriate lifting chains and attachments.
• Hidravlični sistem: Ne tamper with the hydraulic system. If maintenance is required, consult a qualified technician.
• Shranjevanje: Store the crane in a safe, dry place when not in use. Ensure it is folded and secured to prevent accidental movement.

2. Izdelek je končanview

The Wiltec 500 kg Hydraulic Workshop Crane is designed for safe and efficient lifting of heavy loads in workshop environments. Its robust steel construction and hydraulic pump system provide reliable performance.

Ključne značilnosti:

• Visoka nosilnost: Lifts loads up to 500 kg, suitable for engine removal and other heavy lifting tasks.
• Hidravlični sistem: Equipped with an easy-to-operate hydraulic pump for smooth and controlled lifting and lowering.
• Nastavljiva roka: Features a 4-level adjustable boom (830-1280 mm) for versatile lifting heights and reach.
• Mobilnost: Four robust swivel casters ensure easy maneuverability, even with a load.
• Dizajn, ki prihrani prostor: Foldable for compact storage and transport, optimizing workshop space.
• Vzdržljiva konstrukcija: Made from high-quality steel for exceptional robustness and longevity.

Tehnični podatki:

3. Navodila za montažo

Follow these steps to assemble your Wiltec Hydraulic Workshop Crane. It is recommended to have assistance during assembly due to the weight and size of components.

1. Razpakirajte komponente: Carefully unpack all parts and verify against the parts list (not provided in this manual, refer to product packaging).
2. Pritrdite kolesca: Securely attach the four swivel casters to the base frame. Ensure all bolts are tightened.
3. Sestavite osnovne noge: Extend the foldable base legs. Insert the safety pins to lock them in the open position.
   

   Figure 1: Extending and securing the base legs of the crane.
4. Namestitev navpičnega jambora: Attach the vertical mast to the base. Ensure it is properly aligned and secured with the provided fasteners.
5. Mount Hydraulic Cylinder: Install the hydraulic cylinder to the mast and boom assembly.
6. Attach Boom: Connect the adjustable boom to the top of the mast and the hydraulic cylinder.
7. Insert Lifting Handle: Insert the lifting handle into the hydraulic pump mechanism.
8. Končno preverjanje: Pred prvo uporabo dvakrat preverite vse povezave in pritrdilne elemente, da se prepričate, da so tesni in varni.

4. Navodila za uporabo

This section details the proper procedure for operating your hydraulic workshop crane.

4.1. Preparing for Lift:

1. Position the Crane: Roll the crane to the desired lifting location. Ensure the area is clear of obstructions.
2. Iztegnite noge: If not already done, extend the base legs and secure them with the safety pins.
3. Prilagodi dolžino roke: Select the appropriate boom extension based on the weight of the load. The boom has markings for 500 kg, 375 kg, 250 kg, and 125 kg.
   

   Figure 2: Adjustable boom with load capacity markings.
4. Varno nalaganje: Attach the lifting chain and hook securely to the load. If lifting an engine, use an engine leveling bar (load balancer) for better control and balance.
   

   Figure 3: Crane lifting an engine using an engine leveling bar.

4.2. Lifting the Load:

1. Zapri izpustni ventil: Ensure the hydraulic release valve (usually a knob or screw) is fully closed by turning it clockwise.
2. Ročaj črpalke: Insert the lifting handle into the pump socket and pump it up and down to raise the boom and lift the load.
3. Obremenitev monitorja: Continuously monitor the load for stability and balance during lifting.

4.3. Lowering the Load:

1. Odprti izpustni ventil: Slowly turn the hydraulic release valve counter-clockwise to gradually lower the boom and the load.
2. Nadzorovan spust: Control the lowering speed by adjusting how much the valve is opened.
3. Remove Load: Once the load is safely on the ground or support, detach the lifting chain and hook.

4.4. Video demonstracija:

5. Vzdrževanje

Regular maintenance ensures the longevity and safe operation of your Wiltec Hydraulic Workshop Crane.

• Čiščenje: Keep the crane clean and free from dirt, grease, and debris. Wipe down surfaces with a clean cloth.
• Mazanje: Periodically lubricate all moving parts, including pivot points and casters, with appropriate grease or oil.
• Hidravlična tekočina: Check the hydraulic fluid level regularly. Top up with hydraulic jack oil if necessary. Do not overfill.
• Pregled: Regularly inspect the hydraulic cylinder, hoses, chains, and hooks for any signs of wear, corrosion, or damage. Replace worn or damaged parts immediately.
• Shranjevanje: When storing the crane, ensure the boom is fully retracted and the release valve is slightly open to relieve pressure on the hydraulic system. Fold the legs for compact storage.

6. Odpravljanje težav

This section provides solutions to common issues you might encounter with your workshop crane.

7. Garancija in podpora

This product is covered by standard legal guarantees. For specific warranty details, returns, or technical support, please contact Wiltec Wildanger Technik GmbH directly or refer to your purchase documentation.

Prodajalec: Wiltec Wildanger Technik GmbH

Vrne: Politika 30-dnevnega vračila

Podpora: Specialized Customer Support

Za dodatno pomoč obiščite WilTec Store on Amazon.