1. Uvod in predstavitev izdelkaview
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Pedrollo JSWM3CM single-phase 220V water pump. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.
Figure 1: Pedrollo JSWM3CM Water Pump. This image shows the complete assembly of the Pedrollo JSWM3CM water pump, highlighting its compact design and robust construction.
The Pedrollo JSWM3CM is a self-priming surface pump designed for handling clean liquids with low sediment content. It is suitable for various applications including domestic water supply, agricultural irrigation, and light industrial use. Key features include a durable AISI 304 INOX impeller and a high-efficiency IE3 class electric motor.
2. Varnostne informacije
Pomembna varnostna navodila: Vedno upoštevajte osnovne varnostne ukrepe, da zmanjšate tveganje požara, električnega udara in telesnih poškodb.
- Ensure the power supply matches the pump's specifications (220V single-phase).
- Pred kakršnim koli vzdrževanjem ali namestitvijo vedno izklopite napajanje.
- Črpalke ne uporabljajte s poškodovanimi kabli ali vtiči.
- Črpalko zaščitite pred zmrzaljo.
- Poskrbite za ustrezno ozemljitev, da preprečite električni udar.
- Do not pump flammable or corrosive liquids. This pump is designed for clean water only.
- Otroke in nepooblaščene osebe držite stran od delujoče črpalke.
3. Product Components and Design
The JSWM3CM pump is engineered for reliability and performance. Understanding its main components is crucial for proper installation and maintenance.
Figure 2: Internal Components of the Pedrollo JSWM3CM Pump. This diagram illustrates the key internal parts of the pump, including the pump body, impeller, motor, and shaft, providing insight into its robust construction.
Ključne komponente:
- Telo črpalke: Constructed from cast iron, capable of withstanding service pressures up to 10 bars.
- Tekač: Made of AISI 304 INOX for durability and efficient water handling.
- Ejector Diffuser: Manufactured from NORYL.
- Svetilka: Aluminum construction with an inox pump bottom.
- Električni motor: 2900 rpm, IPX4 protection rating, Class F insulation, S1 continuous service. Features an IE3 class for high efficiency and low power consumption. Includes integrated thermal protection for safety.
- Coupling Shaft: Made of INOX EN 10088-3 - 1.4104.
4. Tehnične specifikacije
| Specifikacija | Vrednost |
|---|---|
| Proizvajalec | Pedrollo |
| Referenca modela | JSWM3CM |
| Moč | 1.10 kW |
| Hitrost pretoka | 0 do 7.2 m³/h |
| Head (HMT) | 20 do 54 metrov |
| Napajalnik | Enofazni 220V |
| Hitrost motorja | 2900 vrt./min |
| Ocena zaščite | IPX4 |
| Izolacijski razred | F |
| Continuous Service Type | S1 |
| Material telesa črpalke | Lito železo |
| Material rotorja | AISI 304 INOX |
| Teža | 31 kilogramov |
5. Namestitev (Nastavitev)
Proper installation is critical for the pump's performance and longevity. Follow these guidelines carefully.
Slika 3: Nprample Installation Diagram. This illustration demonstrates a typical setup for the Pedrollo pump, showing the suction height (HS) and the placement of a non-return valve for optimal performance.
- Lokacija: Install the pump in a dry, well-ventilated area, protected from direct sunlight, rain, and freezing temperatures. Ensure sufficient space for maintenance.
- Montaža: Securely mount the pump on a stable, level surface using appropriate bolts to minimize vibration.
- Sesalni vod:
- The pump is self-priming and recommended for drawing water from depths of less than 9 meters.
- Use a rigid, airtight suction pipe with a diameter equal to or larger than the pump's suction port.
- Install a foot valve with a strainer at the end of the suction pipe to prevent debris entry and maintain prime.
- Ensure the suction line slopes upwards towards the pump to avoid air pockets.
- Izpustni vod: Connect the discharge pipe to the pump's outlet. Install a gate valve on the discharge side to regulate flow and facilitate maintenance.
- Električna povezava:
- Connect the pump to a single-phase 220V power supply.
- Ensure the electrical circuit is protected by a suitable circuit breaker and residual current device (RCD).
- The motor has built-in thermal protection, but additional external protection is recommended for critical applications.
- Vse električne priključke mora opraviti usposobljen električar v skladu z lokalnimi predpisi.
- Polnjenje: Before first use, fill the pump casing completely with clean water through the priming port until it overflows. Replace the priming plug securely.
6. Delovanje
Ko je črpalka nameščena in napolnjena, je pripravljena za delovanje.
- Zagon črpalke:
- Ensure the pump is fully primed.
- Open the discharge valve partially or fully.
- Switch on the power supply to the pump. The pump should start immediately and begin pumping water.
- Spremljanje: Med delovanjem črpalke opazujte morebitne nenavadne zvoke, vibracije ali puščanja.
- Ustavitev črpalke:
- Zaprite izpustni ventil.
- Switch off the power supply to the pump.
- Neprekinjeno delovanje: The pump is designed for continuous S1 service, meaning it can operate continuously under a constant load.
7. Značilnosti delovanja
The performance of the Pedrollo JSWM3CM pump is characterized by its flow rate (Q) and total head (HMT). Refer to the performance curve diagram for detailed information.
Figure 4: Performance Curves for JSW3 Series Pumps. This graph illustrates the relationship between flow rate (Q) and total head (HMT) for various models within the JSW3 series, including the JSWM3CM, at 50 Hz and 2900 rpm.
The graph shows how the pump's head (pressure) decreases as the flow rate increases. Locate the curve corresponding to the JSWM3CM model to understand its specific operating range. The pump delivers a flow rate between 0 and 7.2 m³/h and a head between 20 and 54 meters, depending on the operating point.
8. Vzdrževanje
Redno vzdrževanje zagotavlja optimalno delovanje in podaljšuje življenjsko dobo črpalke. Pred vzdrževanjem vedno izklopite napajanje.
- Redni pregledi:
- Inspect the pump and piping for leaks.
- Check electrical connections for signs of wear or corrosion.
- Med delovanjem poslušajte nenavadne zvoke.
- Čiščenje: Periodically clean the pump's exterior to prevent dust and debris buildup, which can affect cooling.
- Nožni ventil/cedilo: Regularly inspect and clean the foot valve strainer to prevent blockages and ensure proper water intake.
- Zimovanje: If the pump is exposed to freezing temperatures, drain all water from the pump casing and piping to prevent damage from ice expansion.
- Mehansko tesnilo: The mechanical seal is a wear part. If persistent leaks occur from the shaft area, the seal may need replacement by a qualified technician.
9. Odpravljanje težav
V tem razdelku so rešitve za pogoste težave, na katere lahko naletite. Za težave, ki niso navedene tukaj, se obrnite na usposobljeno servisno osebje.
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Črpalka se ne zažene | No power supply; Thermal overload tripped; Motor fault. | Check power connection and circuit breaker; Allow motor to cool and reset; Consult a technician. |
| Črpalka deluje, vendar voda ne dovaja | Pump not primed; Air leak in suction line; Suction lift too high; Foot valve clogged. | Re-prime the pump; Check suction line for leaks and tighten connections; Reduce suction depth; Clean foot valve strainer. |
| Nizek pretok ali tlak | Partial blockage in suction/discharge; Air in system; Worn impeller; Incorrect pipe sizing. | Check for blockages; Bleed air from system; Inspect impeller for damage; Verify pipe diameters. |
| Prekomerni hrup ali tresljaji | Cavitation (air in water); Unsecured mounting; Bearing wear; Debris in pump. | Ensure proper priming and no air leaks; Securely mount pump; Consult technician for bearing/debris. |
10. Garancija in podpora
Information regarding specific warranty terms and conditions for the Pedrollo JSWM3CM pump is typically provided at the point of purchase or within separate warranty documentation. Please refer to your purchase receipt or contact your supplier for details.
For technical support, spare parts, or professional servicing, please contact an authorized Pedrollo service center or your product retailer. Always provide the model number (JSWM3CM) and serial number (if applicable) when seeking support.
