Konec izdelkaview
The SENSEA Toilet Paper Holder is designed for convenient and stylish storage of toilet paper rolls. Crafted from a durable zinc and steel alloy with a brushed chrome finish, this holder offers two installation options: traditional screw-mounting or a drill-free adhesive method. Its timeless design ensures compatibility with various bathroom aesthetics.
Slika: spredaj view of the SENSEA Toilet Paper Holder, showcasing its brushed chrome finish and open design.
Nastavitev in namestitev
This toilet paper holder can be installed using two methods: drilling or drill-free adhesive mounting. Choose the method that best suits your needs.
Method 1: Drill-Free Installation (Recommended for smooth, non-porous surfaces)
- Pripravite površino: Clean the desired wall surface thoroughly with a cloth and alcohol. Ensure the surface is dry, smooth, and free from dust, grease, or moisture.
- Nanesite lepilo: Peel one side of the protective film from the provided 3M adhesive pad. Carefully align and press this side onto the mounting plate of the toilet paper holder. Ensure a firm, even application.
- Montaža na steno: Peel the remaining protective film from the adhesive pad. Position the holder against the cleaned wall surface and press firmly for at least 30 seconds. Apply consistent pressure across the entire mounting plate.
- Čas sušenja: Pustite, da se lepilo strdi 48 uri before placing any weight on the holder or attaching accessories. This ensures maximum adhesion strength.
Slika: Zadaj view of the toilet paper holder showing the 3M adhesive pad attached to the mounting plate.
Method 2: Screw-Mount Installation (Hardware not included)
- Označite vrtalne točke: Hold the mounting plate against the wall at the desired installation height. Use a pencil to mark the positions for drilling through the pre-drilled holes on the plate.
- Vrtanje lukenj: Using an appropriate drill bit for your wall type, drill holes at the marked positions. Insert wall anchors if necessary.
- Secure Holder: Align the mounting plate with the drilled holes and secure it to the wall using screws (not supplied). Ensure the holder is firmly attached.
Slika: Zadaj view of the toilet paper holder's mounting plate, indicating the screw holes for traditional installation.
Navodila za uporabo
To use the toilet paper holder, simply slide a standard-sized toilet paper roll onto the open arm. The design accommodates most common roll sizes without a cover, allowing for easy replacement.
Image: The SENSEA toilet paper holder mounted in a bathroom setting, holding a toilet paper roll.
Nega in vzdrževanje
To maintain the appearance and longevity of your SENSEA Toilet Paper Holder, follow these simple care instructions:
- Redno čistite z mehko krpoamp krpo.
- Avoid using abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the brushed chrome finish.
- Dry the holder immediately after cleaning to prevent water spots.
Odpravljanje težav
- Holder feels loose (Drill-Free Installation): Ensure the 48-hour curing time was observed. If the surface was not properly cleaned or is porous, the adhesive may not bond effectively. Re-clean the surface and apply a new adhesive pad, or consider screw-mount installation.
- Holder feels loose (Screw-Mount Installation): Check if the screws are tightened securely. If the wall anchors are damaged or the holes are too large, replace the anchors or relocate the holder.
- Difficulty inserting toilet paper roll: Ensure you are using a standard-sized toilet paper roll. The holder is designed for common dimensions.
Specifikacije izdelka
| Funkcija | Podrobnost |
|---|---|
| Znamka | SENSEA |
| Številka modela | 3276000547563 |
| Material | Zinc Alloy, Steel |
| Končaj | Brušen krom |
| Mere izdelka (D x Š x V) | 16.8 cm x 5.8 cm x 11 cm (približno 6.6 x 2.3 x 4.3 palca) |
| Teža | 200 g |
| Vrsta namestitve | Wall Mount (Drill-Free Adhesive or Screw-Mount) |
| Proizvajalec | ADEO |
Image: Diagram showing the dimensions of the toilet paper holder: 110 mm height and 165 mm width.
Informacije o garanciji
This SENSEA product is covered by a 4-letna garancija from the date of purchase. This warranty ensures the product's reliability, safety, and solid construction under normal use. Please retain your proof of purchase for warranty claims.
Podpora uporabnikom
For any questions, concerns, or assistance regarding your SENSEA Toilet Paper Holder, please contact the manufacturer, ADEO, or your retailer. Refer to your purchase documentation for specific contact details.
