iFixit iPhone 7/7 Plus/8/8 Plus/SE 2020 Home Button

iFixit Home Button Replacement Manual

Compatible with iPhone 7, 7 Plus, 8, 8 Plus, and SE 2020

1. Uvod

This manual provides detailed instructions for replacing the home button on compatible iPhone models. This replacement part restores all home button functions, excluding Touch ID functionality. Touch ID is uniquely paired to the original logic board and cannot be restored with a replacement home button.

For optimal results, it is recommended to have prior experience with small electronics repair or to seek professional assistance.

2. Varnostne informacije

Please read and understand all safety precautions before beginning the repair process.

  • Naprava za izklop: Always ensure your iPhone is completely powered off before starting any repair.
  • Odklopite baterijo: Disconnect the battery as early as possible in the repair process to prevent accidental short circuits.
  • Statična razelektritev: Use an anti-static wrist strap or work on an anti-static mat to prevent electrostatic discharge (ESD), which can damage sensitive electronic components.
  • Ravnajte previdno: Electronic components are fragile. Handle them gently and avoid excessive force.
  • Majhni deli: Keep track of all screws and small parts. Using a magnetic mat or labeled containers is highly recommended.
  • Zaščita oči: Consider wearing eye protection to guard against small flying debris.

3. Izdelek je končanview

The iFixit Home Button replacement part is designed to restore the physical click and home button functionality of your compatible iPhone.

Spredaj view of the iFixit replacement home button

Slika 3.1: Spredaj view of the iFixit replacement home button, showing the black circular button and the flexible circuit board.

Nazaj view of the iFixit replacement home button

Slika 3.2: Nazaj view of the iFixit replacement home button, revealing the internal circuitry and connector.

Ključne značilnosti:

  • Restores home button click functionality.
  • Compatible with iPhone 7, 7 Plus, 8, 8 Plus, and SE 2020.
  • Does NOT restore Touch ID functionality.

4. Vodič za namestitev

This section outlines the general steps for replacing the home button. Specific disassembly steps may vary slightly between iPhone models. Refer to detailed repair guides for your specific iPhone model on the iFixit webspletno mesto (www.ifixit.com) for comprehensive, step-by-step visual instructions.

Potrebna orodja (niso vključena):

  • Pentalobe izvijač
  • Phillips izvijač
  • Tri-point screwdriver
  • Spudger
  • Opening picks
  • Prisesek
  • Pinceta
  • Heat gun or hairdryer (optional, for adhesive softening)
iFixit repair tools kit with various screwdrivers and opening tools

Slika 4.1: Example of an iFixit repair kit containing various tools necessary for electronics repair.

Splošni koraki namestitve:

  1. Pripravite delovni prostor: Ensure a clean, well-lit, and static-free environment.
  2. Power Off iPhone: Completely shut down your iPhone.
  3. Odstranite vijake Pentalobe: Remove the two pentalobe screws located at the bottom edge of the iPhone, next to the charging port.
  4. Open Display Assembly: Carefully open the display assembly. This usually involves using a suction cup and opening picks to separate the display from the frame. Be aware of adhesive and delicate cables.
  5. Odklopite baterijo: Locate and disconnect the battery connector to prevent power flow during the repair.
  6. Disconnect Display Cables: Disconnect all display and digitizer cables from the logic board.
  7. Remove Display Assembly: Carefully remove the entire display assembly from the iPhone body.
  8. Access Home Button: On the back of the display assembly, locate the home button bracket and screws. Remove them.
  9. Disconnect Home Button Cable: Carefully disconnect the home button flex cable from the display assembly.
  10. Remove Old Home Button: Gently remove the old home button. It may be lightly adhered.
  11. Install New Home Button: Position the new iFixit home button into place. Ensure it sits correctly and the flex cable aligns.
  12. Connect New Home Button Cable: Carefully connect the new home button flex cable.
  13. Ponovno sestavite: Follow the disassembly steps in reverse order. Reconnect display cables, then the battery. Reattach the display assembly to the iPhone body and secure the pentalobe screws.
  14. Testna funkcionalnost: Power on the iPhone and test the home button functionality (single press, double press). Remember, Touch ID will not work.

5. Operating the Replacement Home Button

Once installed, the iFixit replacement home button operates identically to the original in terms of physical presses and gestures, with the exception of Touch ID.

  • Enkratni pritisk: Returns to the Home screen from any application.
  • Dvojni tisk: Activates the App Switcher, allowing you to view in preklapljajte med odprtimi aplikacijami.
  • Trojni pritisk: Activates Accessibility Shortcuts (if configured in Settings > Accessibility > Accessibility Shortcut).
  • Pritisnite in držite: Activates Siri (if enabled).

Important Note: Touch ID functionality will be permanently lost with the installation of any non-original home button. This is a security feature implemented by Apple.

6. Vzdrževanje

The iFixit home button replacement part requires minimal maintenance once installed. However, following these general guidelines can help ensure its longevity:

  • Vzdržujte čisto: Regularly wipe the home button and surrounding area with a soft, dry, lint-free cloth to prevent dust and debris buildup.
  • Izogibajte se tekočinam: Do not expose the home button or your device to liquids, as this can cause damage to internal components.
  • Nežna uporaba: Avoid excessive force when pressing the home button.

7. Odpravljanje težav

If you encounter issues after installing the replacement home button, consider the following troubleshooting steps:

TežavaMožen vzrokrešitev
Home button does not click or respond.
  • Flex cable not properly connected.
  • Home button misaligned.
  • Damaged flex cable during installation.
  • Re-open device and ensure home button flex cable is securely seated.
  • Verify home button alignment within the display assembly.
  • Inspect flex cable for tears or damage. If damaged, replacement may be necessary.
Home button feels loose or wobbly.
  • Home button bracket not securely fastened.
  • Home button not seated correctly.
  • Ensure all screws for the home button bracket are tightened.
  • Re-seat the home button into its recess on the display assembly.
Touch ID is not working.
  • To je pričakovano vedenje.
  • The replacement home button does not restore Touch ID functionality due to Apple's security protocols.

8. Specifikacije

Ime delaHome Button Replacement
ZnamkaiFixit
ZdružljivostiPhone 7, iPhone 7 Plus, iPhone 8, iPhone 8 Plus, iPhone SE 2020
barvaČrna
FunkcionalnostRestores home button click and navigation. Does NOT restore Touch ID.
Teža predmeta0.16 unč
ASINB086V6XCS7
Država izvoraKitajska
Prvič na voljo17. julij 2020

9. Garancija in podpora

iFixit stands behind its products. For specific warranty information and support, please refer to the official iFixit webmesto.

iFixit offers a "Backed for Life" warranty on their tools and parts. This means if a tool breaks or a part is defective, they will replace it for as long as you own it.

Hands holding an iFixit screwdriver with a 'Quality Parts and Tools - Backed for Life' badge overlay

Slika 9.1: iFixit's "Backed for Life" commitment, emphasizing quality and long-term support.

For further assistance, visit the iFixit support page or community forums: