1. Uvod
The Dualsky FC151 is a compact 6-axis flight control system designed for RC airplanes and quadcopters. It integrates a 3-axis gyroscope and a 3-axis accelerometer to provide advanced attitude stabilization. This manual provides essential information for the proper setup, operation, and maintenance of your FC151 unit.
Image 1.1: Dualsky FC151 Flight Control unit with indicated dimensions (36mm length, 27.5mm width, 12mm height).
2. Ključne značilnosti
- 6-osna stabilizacija: Combines 3-axis gyroscope and 3-axis accelerometer for precise flight control.
- Kompaktna zasnova: Mini dimension, weighing only 8 grams.
- Visoka zmogljivost: Equipped with a 32-bit high-performance ARM MCU.
- Advanced Algorithm: Utilizes an original advanced attitude stabilization algorithm.
- Aircraft Compatibility: Supports single/double aileron, fly wing, and V-tail aircraft.
- Flaperon Mixing: Integrated support for flaperon mixing.
- Načini letenja: Supports aerobatic/3D airplanes and auto-level functionality.
- Nastavljiva občutljivost: Independent sensitivity adjustment for all 3 axes.
- S.BUS Support: Compatible with Futaba S.BUS protocol.
- Preklop načina: Allows mode switching via an extra channel.
- Enostavno programiranje: Programmed via a single button and LED indicators.
- HV Input Support: Compatible with High Voltage (HV) inputs.
3. Vsebina paketa
Po odprtju embalaže preverite, ali so vse komponente prisotne in nepoškodovane:
- Dualsky FC151 Flight Control Unit
- Connecting Cables (if included, not explicitly listed but implied for installation)
- Navodila za uporabo (ta dokument)
Image 3.1: The Dualsky FC151 Flight Control unit shown within its retail packaging.
4. Nastavitev in namestitev
4.1 Fizična namestitev
Mount the FC151 unit securely in your RC aircraft or quadcopter. Ensure it is oriented correctly according to the "HEAD DIRECTION" arrow on the unit. The compact size allows for flexible placement, but avoid areas with excessive vibration or electromagnetic interference.
Slika 4.1: Zgoraj view of the FC151 unit, highlighting the 'HEAD DIRECTION' indicator and adjustment points for AIL, ELE, RUD.
4.2 Žične povezave
Connect the FC151 to your receiver and servos using appropriate cables. The unit features clearly labeled ports for system power (SYS), aileron (AIL1, AIL2), elevator (ELE), rudder (RUD), and mode selection (MODE). If using S.BUS, refer to your receiver's manual for proper connection to the FC151's S.BUS port.
Image 4.2: The FC151 unit displaying its various input and output ports for connection to a receiver and servos.
4.3 Control Surface Types and Mixing
The FC151 supports various aircraft configurations. Ensure your transmitter is set up correctly for the chosen aircraft type, and then configure the FC151 accordingly. The unit supports:
- Single Aileron Aircraft
- Double Aileron Aircraft
- Fly Wing Aircraft (Delta Wing)
- V-Tail Aircraft
Flaperon mixing is also supported. Refer to the diagram below for visual guidance on control surface configurations.
Image 4.3: Diagram showing typical control surface setups for single/double aileron, V-tail, and fly wing aircraft.
4.4 Nastavitev občutljivosti
The FC151 allows independent sensitivity adjustment for aileron (AIL), elevator (ELE), and rudder (RUD) axes. Use a small screwdriver to carefully adjust the potentiometers labeled AIL, ELE, and RUD on the top of the unit. Start with lower sensitivity settings and gradually increase as needed during test flights to achieve desired stability without overcorrection.
4.5 Flight Mode Selection
The FC151 supports different flight modes, including auto-level and modes suitable for aerobatic/3D flying. These modes can be switched via an extra channel on your transmitter, connected to the FC151's MODE input. Consult the LED indicators for current mode status.
5. Delovanje
Once installed and configured, the FC151 will provide stabilization during flight. The system continuously monitors the aircraft's attitude and makes rapid corrections to maintain stability. For advanced users, programming via the onboard button and LEDs allows for fine-tuning of parameters. Refer to the specific programming sequence detailed in the full product manual (if available) or Dualsky's official webspletno mesto za podrobne korake.
Ensure your transmitter is properly calibrated and all control surfaces respond correctly before attempting flight.
6. Vzdrževanje
- Čiščenje: Napravo vzdržujte čisto in brez prahu ter umazanije. Za čiščenje uporabljajte mehko, suho krpo.
- Pregled: Občasno preverite vse ožičene povezave glede ohlapnosti ali poškodb.
- Okoljski pogoji: Izogibajte se dolgotrajni izpostavljenosti enote ekstremnim temperaturam, vlagi ali neposredni sončni svetlobi.
- Vdelana programska oprema: Check the Dualsky official webza morebitne razpoložljive posodobitve vdelane programske opreme.
7. Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| No power to FC151 | Incorrect wiring, faulty power source, damaged cable. | Check all power connections. Ensure battery is charged. Inspect cables for damage. |
| Unstable flight / Overcorrection | Sensitivity too high, incorrect mounting, vibration. | Reduce sensitivity settings. Re-mount the unit securely. Check for excessive vibrations. |
| Incorrect control response | Incorrect servo direction, wrong aircraft type selected, faulty servo. | Verify servo directions in transmitter. Confirm correct aircraft type setting on FC151. Test servos independently. |
| Preklop med načini ne deluje | Extra channel not configured, incorrect wiring to MODE input. | Ensure transmitter channel is assigned and connected correctly to the FC151 MODE input. |
8. Specifikacije
| Funkcija | Podrobnost |
|---|---|
| Znamka | Dualsky |
| Ime modela | FC151 |
| Vrsta nadzora | 6-Axis (3-axis Gyro + 3-axis Accelerometer) |
| MCU | 32-bitni ARM |
| Teža | 8 grams (approximate, based on description) |
| Dimenzije | 36mm x 27.5mm x 12mm (approximate, based on image) |
| Podprta letala | Single/Double Aileron, Fly Wing, V-Tail |
| Protokoli | Futaba S.BUS |
| Vhodna voltage | Supports HV inputs (specific voltage range not provided) |
| UPC | 782911429230 |
9. Garancija in podpora
For warranty information, please refer to the official Dualsky website or contact your authorized Dualsky dealer. Product support and additional resources, including detailed programming guides, may be available on the manufacturer's webspletno mesto:
For specific inquiries or technical assistance, please contact Dualsky customer service.
The GTIN/UPC for this product is 6941047114364.
