LEDVANCE 360DEG Wall Sensor Instruction Manual

1. Uvod

Thank you for choosing the LEDVANCE 360DEG Wall Sensor. This device is designed to provide efficient and automated lighting control for outdoor environments, enhancing both convenience and energy savings. This manual provides essential information for the safe installation, operation, and maintenance of your sensor.

2. Varnostne informacije

Pred namestitvijo in uporabo natančno preberite ta varnostna navodila. Neupoštevanje teh navodil lahko povzroči električni udar, požar ali druge nevarnosti.

• Profesionalna namestitev: Installation must be carried out by a qualified electrician in accordance with all local and national electrical codes.
• Odklop napajanja: Always disconnect power at the circuit breaker before installing, servicing, or cleaning the device.
• voltage: Zagotovite dovodni voltage matches the device's requirements (230 Volt AC).
• Okoljski pogoji: The device has an IP55 protection rating, making it suitable for outdoor use and protected against dust and low-pressure water jets. However, avoid direct exposure to extreme weather conditions beyond its specified operating range (-20°C to +40°C).
• Sprememba: Do not modify or alter the device in any way. Unauthorized modifications may void the warranty and create safety hazards.

3. Vsebina paketa

Pred začetkom namestitve preverite, ali so prisotne vse komponente:

• 1x LEDVANCE 360DEG Wall Sensor device

4. Značilnosti izdelka

• Stand-alone motion and light sensor for wall mounting.
• 360° detection field for comprehensive coverage.
• Optimized for energy saving.
• Three selectable operating modes: continuous light on, activation by motion, or activation by twilight.
• Zero-crossing circuit optimized for the operation of LED luminaires.
• IP55 protection type, suitable for outdoor use.
• Designed to be disassembled for separate control of internal light sources (if applicable).

5. Nastavitev in namestitev

The LEDVANCE 360DEG Wall Sensor is designed for wall mounting. Refer to the following diagrams and instructions for proper installation.

Slika 5.1: Dimensions of the LEDVANCE 360DEG Wall Sensor. The sensor measures 7.6 cm in width, 9.5 cm in depth, and 11.1 cm in height.

Slika 5.2: Od blizu view of the LEDVANCE 360DEG Wall Sensor unit, showing its black polycarbonate housing and the spherical detection lens at the bottom.

5.1 Mesto pritrditve

• Choose a wall location that provides the desired detection coverage. The sensor has a 360° detection field and a maximum detection distance of 10 meters.
• Avoid mounting near heat sources, air conditioning vents, or areas with direct sunlight, as these can interfere with sensor performance.
• Ensure the mounting surface is stable and can support the device's weight (250 grams).

5.2 Električna povezava

• OPOZORILO: Preden izvedete kakršne koli električne povezave, izključite napajanje.
• Connect the sensor to a 230 Volt AC power supply.
• Follow the wiring diagram provided with the product packaging for correct connections. Ensure all connections are secure and insulated.
• The zero-crossing circuit is optimized for LED luminaires.

6. Navodila za uporabo

The LEDVANCE 360DEG Wall Sensor offers flexible operation modes and adjustable settings.

6.1 Načini delovanja

The sensor features three selectable operating modes:

1. Continuous Light On: The connected light remains continuously on, bypassing sensor detection.
2. Activation by Motion: The connected light turns on when motion is detected within the 360° field.
3. Activation by Twilight: The connected light turns on when ambient light levels fall below a set threshold (twilight) and motion is detected.

Refer to the product's internal settings or external switches (if present) to select the desired mode. Note that some settings may require opening the device, which should only be done by a qualified professional.

6.2 Detection Settings

The sensor allows for adjustment of the light duration after detection:

• Trajanje svetlobe: The duration for which the light remains on after motion detection can typically be set between 2 seconds and 15 minutes. Adjust this setting according to your preference and energy-saving goals.

7. Vzdrževanje

The LEDVANCE 360DEG Wall Sensor requires minimal maintenance.

• Čiščenje: Periodically clean the sensor lens and housing with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the polycarbonate material.
• Pregled: Regularly inspect the device for any signs of damage or wear. If any damage is found, disconnect power and contact a qualified electrician for repair or replacement.

8. Odpravljanje težav

If you experience issues with your LEDVANCE 360DEG Wall Sensor, refer to the following common problems and solutions:

• Lučka se ne prižge:
  • Preverite, ali je napajanje priključeno in aktivno.
  • Verify the operating mode is set correctly (e.g., 'Activation by Motion' or 'Activation by Twilight').
  • Prepričajte se, da je območje zaznavanja prosto ovir.
  • Adjust the sensitivity settings if available.
• Lučka neprekinjeno sveti:
  • Check if the operating mode is set to 'Continuous Light On'.
  • Ensure no constant motion is occurring within the detection zone.
• Light turns on unexpectedly:
  • Check for environmental factors like moving branches, small animals, or sudden temperature changes that might trigger the sensor.
  • Adjust the sensor's sensitivity or detection range if possible.

Če težava po poskusu teh rešitev še vedno obstaja, se obrnite na podporo strankam ali usposobljenega električarja.

9. Specifikacije

10. Garancija in podpora

The LEDVANCE 360DEG Wall Sensor comes with a 3-letna garancija proizvajalca od datuma nakupa, ki krije napake v materialu in izdelavi pri normalni uporabi.

For technical support, warranty claims, or further assistance, please visit the official LEDVANCE store or contact their customer service department. You can find more information and contact details on the Trgovina blagovne znamke LEDVANCE.

Prosimo, shranite dokazilo o nakupu za namene garancije.