1. Izdelek je končanview
The SHIMANO Deore Rear Centre Lock Hub is a high-performance component designed for mountain bikes, offering reliable trail performance and simple setup. It features SHIMANO's Centerlock system for easy disc brake rotor installation and Quick Engagement technology for optimized traction and faster acceleration. This hub is specifically designed for use with MICRO SPLINE 12-speed MTB cassettes.
- Centerlock System: Facilitates easy disc brake rotor installation with a spline mount and lock ring.
- Quick Engagement Technology: Equipped with 18/16 notches and two sets of pawls to double engagement points, optimizing traction for faster acceleration.
- MICRO SPLINE Compatibility: Designed exclusively for SHIMANO MICRO SPLINE 12-speed MTB cassettes.
- Vzdržljiva konstrukcija: Built for reliable performance on various trail conditions.
2. Specifikacije
| Znamka | ŠIMANO |
| Model | Deore Rear Centre Lock Hub |
| Rotor Mount | Sredinska ključavnica |
| Compatible Speed | MTB 12-speed |
| Compatible Sprocket Type | MICRO SPLINE (Note: Only MICRO SPLINE cassettes can be used. Conventional cassette sprockets are not compatible.) |
| Tip zavore | Disk zavora |
| Over Locknut Dimension | 142 mm |
| Tip osi | 12mm E-THRU (Axle shaft not included) |
| Luknje za napere | 28H (Also available in 32H variants) |
| Referenčna teža | 305g (for specific variant) |
| Material | Multi |
| Vključene komponente | Zadnje pesto |
| UPC | 192790444048 |
Figure 1: SHIMANO Deore Rear Centre Lock Hub (12x142) 28h.
Slika 2: Podrobno view of the SHIMANO Deore Rear Centre Lock Hub, highlighting the Micro Spline freehub body.
3. Nastavitev in namestitev
3.1 Disc Brake Rotor Installation (Centerlock System)
The Centerlock system simplifies disc brake rotor installation. Align the rotor with the splines on the hub and secure it with the provided lock ring. Ensure the lock ring is tightened to the manufacturer's specified torque using the appropriate tool.
3.2 Cassette Installation (MICRO SPLINE)
This hub is designed exclusively for SHIMANO MICRO SPLINE 12-speed cassettes. Align the cassette with the MICRO SPLINE freehub body and slide it into place. Secure the cassette with the lock ring, tightening it to the specified torque. Important: Conventional cassette sprockets are not compatible with this hub. Attempting to install incompatible cassettes may cause damage.
3.3 Axle Compatibility
The hub is compatible with 12mm E-THRU axles. Please note that the axle shaft is not included with the hub and must be acquired separately.
3.4 Spoke Lacing
This specific hub variant features 28 spoke holes. Ensure your wheel build utilizes the correct spoke count and lacing pattern for optimal wheel integrity and performance.
4. Navodila za uporabo
Once properly installed, the SHIMANO Deore Rear Centre Lock Hub operates automatically as part of your bicycle's drivetrain. The Quick Engagement technology ensures rapid power transfer from your pedals to the wheel, providing responsive acceleration. Ensure all components (cassette, disc rotor, axle) are correctly installed and torqued before riding. Regular checks for loose components are recommended.
5. Vzdrževanje
Proper maintenance extends the life and performance of your hub. SHIMANO hubs often feature durable cup and cone bearings, which benefit from periodic servicing.
- Čiščenje: Regularly clean the exterior of the hub to prevent dirt and grime buildup.
- Servis ležajev: Periodically inspect and re-grease the cup and cone bearings. This typically involves disassembling the hub, cleaning old grease, inspecting bearing surfaces and balls, and applying fresh, high-quality bicycle grease.
- Freehub Inspection: Check the freehub body, pawls, and springs for wear or damage. Ensure the pawls engage smoothly. When disassembling, be mindful of small components like springs and a plastic spacer, which can be easily misplaced.
- Vzdrževanje tesnil: For seal ring maintenance, the SHIMANO TL-FH16 seal ring tool is recommended, though careful manual handling may suffice.
- Preverjanje navora: Periodically check the torque of the disc brake rotor lock ring and cassette lock ring.
6. Odpravljanje težav
- Missing Rotor Lock Ring: If the rotor lock ring is missing upon unboxing, contact your retailer or SHIMANO support for a replacement. Do not operate the bicycle without a properly secured disc brake rotor.
- Excessive Noise from Freehub: A loud freehub can sometimes be mitigated by applying a thicker, waterproof marine grease to the pawls and springs during maintenance. Ensure not to over-grease, which can hinder pawl engagement.
- Poor Freehub Engagement: If the freehub engagement feels sluggish or inconsistent, it may indicate a need for cleaning and lubrication of the pawls and springs, or inspection for worn components.
- Wheel Wobble/Play: Check for proper axle installation and bearing adjustment. If play persists, bearing service may be required.
7. Garancija in podpora
This SHIMANO product is covered by a Limited Warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official SHIMANO website. For technical assistance, spare parts, or warranty claims, please contact your authorized SHIMANO dealer or SHIMANO customer support.
