Beghelli 19432 LED Emergency Lamp Uporabniški priročnik

Uvod

This manual provides essential information for the safe and efficient use of your Beghelli 19432 LED Emergency Lamp. Please read this manual thoroughly before installation, operation, or maintenance to ensure proper functioning and to prevent damage or injury.

The Beghelli 19432 is a high-performance LED emergency lamp designed for reliable illumination during power outages or emergency situations. It features a robust polycarbonate construction and a powerful 1200 lumen LED light source with Li-Fe battery technology.

Varnostne informacije

Za preprečitev električnega udara, požara ali poškodb vedno upoštevajte naslednja varnostna navodila:

• Pred namestitvijo ali vzdrževanjem se prepričajte, da je napajanje odklopljeno.
• Namestitev mora opraviti usposobljen električar v skladu z lokalnimi električnimi predpisi.
• Ne izpostavljajte lamp to excessive moisture or extreme temperatures.
• Ne poskušajte odpreti ali spremeniti lamp housing, as this may void the warranty and pose a safety risk.
• Embalažni material hranite izven dosega otrok.

Vsebina paketa

Preverite, ali so vse komponente prisotne in nepoškodovane:

• Beghelli 19432 LED Emergency Lamp enota
• Integrated Li-Fe Battery
• Pribor za montažo (vijaki, stenski vložki)
• Uporabniški priročnik (ta dokument)

Nastavitev in namestitev

The Beghelli 19432 emergency lamp is designed for wall mounting. Follow these steps for proper installation:

1. Izberite lokacijo: Select a suitable location for installation, typically near an exit or in a common area, ensuring the light can illuminate the required path during an emergency. The lamp is designed for indoor use in commercial or emergency exit applications.
2. Pripravite montažno površino: Ensure the wall surface is clean, dry, and capable of supporting the lampteža.
3. Označite vrtalne točke: Uporabite lamp's mounting holes as a template to mark the drilling points on the wall.
4. Vrtanje lukenj: Drill holes at the marked points using an appropriate drill bit for the wall plugs.
5. Vstavite stenske vtiče: V izvrtane luknje vstavite priložene stenske vložke.
6. Namestite Lamp: Zavarujte lamp na steno s priloženimi vijaki. Prepričajte se, da je trdno pritrjen.
7. Priključite napajanje: Povežite lamp to the main power supply according to the wiring diagram (refer to the diagram usually found inside the lamp's cover or on a separate sheet, not provided here). Ensure correct polarity and secure connections. The lamp is battery-operated but requires a constant power supply to keep the battery charged and for automatic operation.
8. Začetni strošek: After installation, allow the lamp to charge for at least 24 hours before its first use to ensure the battery is fully charged.

Image: The Beghelli 19432 LED Emergency Lamp, featuring its sleek white polycarbonate housing and the transparent light diffuser, designed for efficient light distribution.

Navodila za uporabo

The Beghelli 19432 operates automatically:

• Normalno delovanje: When connected to the main power supply, the lamp's battery will charge, and the lamp will remain off (or in standby mode, depending on configuration).
• Način v sili: In the event of a power failure, the lamp will automatically switch on, providing 1200 lumens of illumination from its internal Li-Fe battery.
• Vrnitev v normalno stanje: Once main power is restored, the lamp will automatically switch off and begin recharging its battery.
• Test Button (if applicable): Some models may include a test button to manually check the emergency function. Press and hold the button to simulate a power outage and verify the lamp illuminates. Release the button to return to normal operation. (Note: Specific button location and function may vary; refer to product labeling if present.)

Vzdrževanje

Regular maintenance ensures the longevity and reliability of your emergency lamp:

• Čiščenje: Očistite lampZunanjost očistite z mehko, suho krpo. Ne uporabljajte abrazivnih čistil ali topil.
• Preverjanje baterije: Perform a monthly functional test by simulating a power outage (e.g., by pressing the test button or temporarily disconnecting power) to ensure the battery holds a charge and the lamp illuminates for the specified duration.
• Annual Discharge Test: Annually, perform a full discharge test. Disconnect the main power supply and allow the lamp to operate until the battery is fully depleted. Then, reconnect power and allow it to recharge for 24-48 hours. This helps maintain battery health.
• Zamenjava baterije: The integrated Li-Fe battery has a long lifespan but will eventually require replacement. This should only be performed by qualified personnel. Contact Beghelli support for authorized service.
• Lamp Zamenjava: The LED light source is designed for long-term use and is generally not user-replaceable. If the LEDs fail, the entire unit may need replacement.

Odpravljanje težav

Za pogoste težave in njihove rešitve glejte spodnjo tabelo:

Če naletite na težave, ki niso navedene tukaj, ali če predlagane rešitve ne odpravijo težave, se obrnite na podporo strankam Beghelli.

Specifikacije

Garancija in podpora

For warranty information, please refer to the documentation provided with your purchase or visit the official Beghelli website. Beghelli products are designed for durability and performance.

For technical support, service, or inquiries regarding replacement parts, please contact Beghelli customer service through their official channels. Contact information can typically be found on the Beghelli webspletnem mestu ali na embalaži izdelka.

Informacije o recikliranju: For information on recycling this product, particularly the lamp and battery components, please refer to local regulations and recycling guidelines. Specific information regarding lamp recikliranje in odstranjevanje lomljenega ali poškodovanega lamps can often be found on the manufacturer's website or through local waste management services.