Uvod
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Sencor SDC 2800 W Digital Alarm Clock. Please read this manual thoroughly before using the device to ensure proper function and to maximize its lifespan. Keep this manual for future reference.
Konec izdelkaview
The Sencor SDC 2800 W is a digital alarm clock designed for clear time display, date, day of the week, and temperature readings. It features two independent alarms and a backlight for visibility in various lighting conditions.
This image displays the Sencor SDC 2800 W Digital Alarm Clock. The large digital display shows the time as 12:58 PM, with a PM indicator and a backlight icon. On the right side, smaller digits indicate the date as December 30th (30.12), the day of the week as Monday (MO), and the current temperature as 20.6°C. Below the temperature, there are two alarm icons, labeled 1 and 2, indicating the presence of two settable alarms. The clock has a white rectangular casing with control buttons visible on the top edge.
Nadzorni gumbi (zgornja plošča)
- NASTAVITEV: Vstopi v način nastavljanja časa, datuma in alarmov.
- UP/DOWN (▲/▼): Prilagodi vrednosti med nastavitvenim načinom.
- ALM: Activates/deactivates alarms and enters alarm setting mode.
- SNOOZE/LUČ: Activates snooze function during an alarm; temporarily illuminates backlight.
Nastavitev
Namestitev baterije
- Poiščite pokrovček predalčka za baterije na zadnji strani budilke.
- Pokrov odstranite tako, da ga potisnete ali dvignete.
- Insert two (2) AAA batteries (not included) according to the polarity indicators (+ and -) inside the compartment.
- Varno namestite pokrov prostora za baterije.
- The clock will power on and display default settings or the current time if batteries were already present.
Navodila za uporabo
Nastavitev ure in datuma
- Pritisnite in držite NASTAVI približno 3 sekunde, dokler prikaz časa ne začne utripati.
- Uporabite UP or DOL gumbe za nastavitev ure. Pritisnite NASTAVI za potrditev.
- Uporabite UP or DOL gumbe za nastavitev minut. Pritisnite NASTAVI za potrditev.
- Continue this process to set the year, month, and day.
- Po nastavitvi dneva pritisnite NASTAVI to exit the time/date setting mode.
- Za preklop med 12-urnim in 24-urnim formatom časa pritisnite UP button while in normal time display mode. The "PM" indicator will appear for PM hours in 12-hour format.
Nastavitev alarmov (Alarm 1 in Alarm 2)
- Pritisnite ALM button once to display Alarm 1 time.
- Pritisnite in držite ALM button for approximately 3 seconds until the Alarm 1 time starts flashing.
- Uporabite UP or DOL buttons to adjust the Alarm 1 hour. Press ALM za potrditev.
- Uporabite UP or DOL buttons to adjust the Alarm 1 minute. Press ALM za potrditev.
- Repeat steps 1-4 for Alarm 2 by pressing ALM again after setting Alarm 1.
- Za vklop ali izklop alarma pritisnite ALM button repeatedly in normal time display mode until the desired alarm icon (1 or 2) appears or disappears on the display.
Funkcija dremeža
- Ko se oglasi alarm, pritisnite SNOOZE / LUČ button to temporarily silence the alarm. The alarm will sound again after a few minutes (typically 5-10 minutes).
- To turn off the alarm completely, press any other button (e.g., NASTAVI, ALM, UP, DOL).
Osvetlitev ozadja
- Pritisnite SNOOZE / LUČ button at any time to briefly illuminate the display backlight for better visibility in low light conditions.
Prikaz temperature
- The clock automatically displays the ambient temperature.
- Za preklop med Celzijem (°C) in Fahrenheitom (°F) pritisnite DOL gumb v običajnem načinu prikaza časa.
Vzdrževanje
- Čiščenje: Wipe the clock clean with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Zamenjava baterije: Replace batteries when the display becomes dim or functions become erratic. Always replace both batteries at the same time with new AAA batteries.
- Shranjevanje: Če ure ne boste uporabljali dalj časa, odstranite baterije, da preprečite puščanje.
Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Zaslon je prazen ali temen. | Baterije so prazne ali nepravilno vstavljene. | Baterije zamenjajte z novimi baterijami AAA in pri tem pazite na pravilno polarnost. |
| Alarm se ne oglasi. | Alarm ni aktiviran ali je napačno nastavljen. | Ensure the alarm icon (1 or 2) is visible on the display. Verify alarm time is set correctly. |
| Napačen čas/datum. | Ura/datum nista bila nastavljena ali ponastavljena po menjavi baterije. | Za ponastavitev sledite navodilom »Nastavitev časa in datuma«. |
| Odčitek temperature se zdi netočen. | Ura je postavljena blizu vira toplote ali na neposredno sončno svetlobo. | Premaknite uro na mesto s stabilno temperaturo okolice. |
Specifikacije
- Znamka: SENKOR
- Model: SDC 2800 W
- barva: Bela
- Vrsta zaslona: Digitalno
- vir energije: 2 x AAA baterije (niso vključene)
- Dimenzije: 5.08 x 2.64 x 1.57 palcev (12.9 x 6.7 x 4 cm)
- Teža artikla: 4.8 unče (137 gramov)
- Posebne lastnosti: Alarm, Date, Day of Week, Temperature Display (°C/°F), Backlight
- Material: Plastika
- Način delovanja: Električni
Garancija in podpora
For warranty information or technical support, please refer to the documentation provided with your purchase or contact Sencor customer service directly. Keep your proof of purchase for warranty claims.
For further assistance, visit the official Sencor webspletnega mesta ali se obrnite na njihove kanale za podporo strankam.
